800kw Biomass Gasifier Power Generation System
The biomass gasification power generation system developed by our company uses fluidized bed gasifier and gas purification device to convert rice husks, wood chips and straw and stalks into clean fuel gas. The installed capacity of single machine can be made according to user requirements and demands. The system is reliable in operation and easy operation. After firing for more than 20 minutes, it can provide fuel gas to engine-generator unit to generate electricity at 20th minutes after start. In addition to providing customer for self-usage, they can also sell extra power to the office power grid.
Raw material
Parameter
Â
| Type | DY-L5000 |
| Gas Production rate (Nm³/h) | 1500 |
| Rated output power of matched generator (kw) | 400KW |
| Temperature of clean gas (ºC) | <35 |
| Consumption of biomass fuel (ton/h) | 1.6-1.92 |
| Weight(t) | 26.7 |
| Volume of circulating water(ton/h) | 12 |
1) Technical advantages: Circulating fluidized bed, advanced technology, large and stable gas production, and can start power generator unit in 20 minutes.
2) The original advanced gas purification technology, high gas cleanliness, prolongs the service life of the engine and generator set.
3) Under the conditions of the same gas production and power generation, the equipment is small in size, less footprint area require, flexible layout, and easy to operate and maintain.
4) The whole system and auxiliary equipment are all designed with high-grade explosion-proof design technology, which is more safe and reliable.
5) Energy-saving advantages: 60%-80% energy saving than natural gas and liquefied gas, high thermal efficiency
6) Environmental advantages: Dust-free emission during operation, safe and environmentally friendly
7) Return on investment: centralized gas supply and power supply, recovery of investment cost within 8 to 12 months, low energy consumption and significant economic benefits
8) Wide range of usage: wide range of raw materials resources.
Process
More detail
Â
The biomass gasification power generation system developed by our company uses fluidized bed gasifier and gas purification device to convert rice husks, wood chips and straw and stalks into clean fuel gas. The installed capacity of single machine can be made according to user requirements and demands. The system is reliable in operation and easy operation. After firing for more than 20 minutes, it can provide fuel gas to engine-generator unit to generate electricity at 20th minutes after start. In addition to providing customer for self-usage, they can also sell extra power to the office power grid.
Raw materialParameter
Â
| Type | DY-L5000 |
| Gas Production rate (Nm³/h) | 1500 |
| Rated output power of matched generator (kw) | 400KW |
| Temperature of clean gas (ºC) | <35 |
| Consumption of biomass fuel (ton/h) | 1.6-1.92 |
| Weight(t) | 26.7 |
| Volume of circulating water(ton/h) | 12 |
1) Technical advantages: Circulating fluidized bed, advanced technology, large and stable gas production, and can start power generator unit in 20 minutes.
2) The original advanced gas purification technology, high gas cleanliness, prolongs the service life of the engine and generator set.
3) Under the conditions of the same gas production and power generation, the equipment is small in size, less footprint area require, flexible layout, and easy to operate and maintain.
4) The whole system and auxiliary equipment are all designed with high-grade explosion-proof design technology, which is more safe and reliable.
5) Energy-saving advantages: 60%-80% energy saving than natural gas and liquefied gas, high thermal efficiency
6) Environmental advantages: Dust-free emission during operation, safe and environmentally friendly
7) Return on investment: centralized gas supply and power supply, recovery of investment cost within 8 to 12 months, low energy consumption and significant economic benefits
8) Wide range of usage: wide range of raw materials resources.
Process
More detail
Â
Stone Coated Roof Tile Production Line
Stone coated roof tile production line made from natural sand, with advanced high-pressure technology to make traditional roof tile rendering 3D stereo effect.
Unique pleated design groove, so that the roof tiles to each other more tightly grip more firmly, then water and better performance.
It has a metal plate performance, easy cutting and processing, single tile large area and light weight. Steel tile unique convex design so that each piece of tile steel are closely linked to each other, by means of its unique levels nails embedded system, firmly fixed in the roof.
Technical parameters:
1.Auto bottom gule spraying section
l Appearance size:4000*1000*2000 mm
l Driving section:3KW Excitation motor or frequency speed regulation (as requirements )
l Automatic pressure spray tank:1set capability:200kg Range:0.6~1Mpa
l Automatic glue machine motor: Servo motor, Power:750w, plc
l Automatic spray gun:4 set(spare parts)
l Dust collecting fan: 1set power:200w
l Damp proof lamp:1pc power:100w
l Conveying device:Chain reciprocating
l Air compressor:1set power:7.5kw
l Dust control of axial flow fan:1set power: 200w
l Agitator: 1set power:1.5kw
2.Auto stone coated section
l Appearance size:3500×1000×1500mml Framework: Steel welding
l Conveying device:Chain reciprocating
l Automatic sand hopper: 1set capability:200kg
l Bucket lift:1 set
l Manual sandblast gun:4sets
3.The first time drying section
l Appearance size:25000×1000×1200 mm
l Framework: Steel welding
l Frame type thermal insulation wall: 1.2mm cold steel with Rock wool
l Automatic temperature controller:4set Range:0°~160°
l Infrared heating tube: 30pcs Power:30kw
l Conveying device:Chain reciprocating
l Air cooling device:1 set Power:200w
4,Auto face glue spraying section
l Appearance size:3000×1000×2000 mm
l Framework: Steel welding
l Damp proof lamp:1pc Power:100w
l Automatic pressure spray tank:1set capability:200kg Range:0.6~1Mpa
l Conveying device:Chain reciprocating
l Automatic spray gun:4 set(spare parts)
l Manual patch glue gun:4 set
l Dust control of axial flow fan:1set power: 200w
l Automatic glue machine motor: Servo motor, Power:750w
5.The second time drying section
l Appearance size:30000×1000×1200 mm
l Framework: Steel welding
l Frame type thermal insulation wall: 1.2mm cold steel with Rock wool
l Automatic temperature controller:4set Range:0°~160°
l Infrared heating tube: 30pcs Power:30kw
l Conveying device:Chain reciprocating
l Air cooling device:1 set Power:200w
Pictures of machine:
Training and Installation :
1. We offer installation service local in paid, reasonable charge.
2. QT test is welcome and professional.
3. manual and using guide is optional if no visiting and no installation.
Certification and after service:
1. Match the technology standard, ISO producing certification
2. CE certification
3. 12 months warranty since the delivery. Board.
Our advantages:
1. Short delivery period.
2. Effective communication
3. Interface customized.
Stone Coated Roof Tile Production Line,Stone Metal Roof Tiles Production Line,Stone Steel Roof Tiles Production Line,Steel Colorful Stone Coated Production Line
YingYee Machinery and Technology Service Co.,Ltd , https://www.yingyee.cn