• Posted on

DIN137 Stainless Steel SS304 SS316 M2-10 Wave Washer

  • Model NO.: Standard
  • Material: Stainless Steel
  • Combination Washer Packaging: All Inclusive
  • Available Material: Carbon Steel, High Strength Steel, Stainless Steel
  • Application: Machinery
  • Transport Package: 20-25kg Carton+900kg/Pallet
  • Origin: China
  • Type: Wave
  • Combination Washer Structure: A Type
  • Spring Washer Type: Standard
  • Finish: 3.6, 4.8, 5.6, 6.8, 8.8, 9.8, 10.9, 12.9
  • Trademark: HN
  • Specification: ISO9001: 2008
  • HS Code: 731815
Stainless Steel 304 Wave Washer

Product Description:
A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut. Other uses are as a spacer, spring (belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Washers usually have an outer diameter (OD) about twice the width of their inner diameter (ID).

· Washers are usually metal or plastic. High quality bolted joints require hardened steel washers to prevent the loss of pre-load due to Brinelling after the torque is applied.

· Rubber or fiber gaskets used in taps (or faucets, or valves) to stop the flow of water are sometimes referred to colloquially as washers; but, while they may look similar, washers and gaskets are usually designed for different functions and made differently.
Products name Wave washer
Standard: DIN,ASTM/ANSI JIS EN ISO,AS,GB
Material Stainless Steel: SS201, SS303, SS304, SS316,,SS904L 
Steel Grade:Common and high strength
Finishing Zinc(Yellow,White,Blue,Black),Hop Dip Galvanized(HDG),Black Oxide,
Geomet,Dacroment,anodization,Nickel plated,Zinc-Nickel plated
   
Customized Products
Lead time		 Busy season:15-30days,Slack seaon:10-15days

Packing And Delivery
20-25kg Carton+900kg/Pallet
 

Plate Flange

The Flat Face Flange has a gasket surface in the same plane as the bolting circle face. Applications using flat face flanges are frequently those in which the mating flange or flanged fitting is made from a casting.

Flat face flanges are never to be bolted to a Raised Face Flange. ASME B31.1 says that when connecting flat face cast iron flanges to carbon steel flanges, the raised face on the carbon Steel Flange must be removed, and that a full face gasket is required. This is to keep the thin, bittle cast iron flange from being sprung into the gap caused by the raised face of the carbon steel flange.

Flat Flange,Slip On Flat Face Flange,Flat Face Blind Flange,Flat Face Weld Neck Flange

Fuyuan Marine Accessories Co., Ltd , https://www.fymarineparts.com