Drive at night and cherish and cherish

In the lonely night, the boundless darkness enveloped the world, there was no sound everywhere, only the sound of the wheels spinning on the ground. We all went on the road at one night and moved to different directions for different reasons. The darkness has always made us accustomed to light. Travelers who drive at night will always follow a principle: safety first. For those friends who are not accustomed to running at night, the unknown darkness is a hidden danger. Let's make everyone enjoy the little experience of driving at night. I hope that we can help everyone safely and safely.

Driving at night often encounters intersections, which can be based on the illumination of sideways lights to predict the driving situation of the other vehicle. If the intersection has scattered light from the front vehicle's high beam, it can be judged that the car is still far away from the intersection; if the big light has a beam of light or there is bright light on the corners of the intersection (more common at the T-shaped intersection), do a good job Measures. Therefore, there are still many “signposts” that can be used for reference when watching at night. At the same time, according to the light of the remote car lights can also help us determine the road ahead. In good weather conditions, if the other party is a high beam headlight, and the distance is far and clear, it can be determined that the road ahead is flat; if the high beam light line suddenly disappears, it can be determined that there is an intersection or a bend in front; The high-beam light line swings to the left and right, and it can be judged that the front is a curved road; if the high-beam light is floating down, it can be judged that the slope is in front of it.

Driving at night, lights are an essential aid. In use, not only should not be allowed to open the fog lamp and headlights together (if you do not even clear the switch fog lights, then still look at the user manual it), but also understand how to use and change the light. During driving at night, if the speed of the vehicle is less than 30 km/h, a low beam light should be used. Under normal conditions, the lights can be illuminated 30 meters away. When passing through the intersection, the speed should be decelerated at a distance of 50 to 100 meters from the intersection, and the high beam light should be turned into a low beam light. At the same time, the turn signal should be turned on to indicate the direction of travel.

On the road without barriers, there is a very tricky problem with driving at night. It is the lights coming from the opposite side. Normally speaking, when the distance between the opposite vehicles is 150 meters, the high beam should be turned into the low beam. This is to avoid obstructing the driver's line of sight. If the opponent does not change to the low beam, it should be decelerated immediately and used continuously. Change the way to far and near light to indicate that if the other party still does not change, you should slow down to the right to stop and avoid, do not fight with strong light on the shot, so as not to damage the vision of both sides and cause a car accident. Sometimes external light interferes with the driver. Therefore, we should also take some preventive measures. When the rear vehicle is driving high beam for a long time, in order to avoid the stimulation of light, the angle of the rearview mirror can be changed, and the dazzling feeling can be reduced. In the meeting car, the driver will experience a sudden drop in vision due to the illumination of the opposite car light, and the visibility is low. At this time, the driver’s eyes can avoid the direction of the lighting axis, use a shading plate to block or wear anti-glare mirrors, and there will be some anti-glare. effect.

Road conditions in the night are very difficult to judge, so pay attention. Vision is blocked in the dark, drivers can also erect their ears. In general, if you feel that the sound of the engine becomes dull and the speed of the vehicle is slowing down, it means that the running resistance increases and the car may be driving on an uphill or soft road. If you feel that the sound of the engine has become brisk and the speed of the engine has been increased automatically, it means that the resistance during travel is reduced and the car may be driving on a downhill road. In the evening, under the premise of ensuring safety, only the wide lights will be displayed, allowing the eyes to adapt to the lack of light, and at night, with the assistance of the low beam, the sight will be better. The old driver also summed up the principle of “walking ash without going black” at night. In the absence of moonlight, the road surface is generally grayish black, with a black surface outside the road; places with puddles will appear brighter, while pits will be darker. In addition, we need to accumulate experience in judging the topography based on the changes in the front light poles. If the light beam shortens may be a corner or an uphill slope, the length of the light beam may be downhill, and the light beam may have pits on the road.

Hey, on the road, are you leaving? Boiling, restless, where are you going? When a car disappears, when a person becomes a fan, you don't know why they left. In the night when every star forsakes the Milky Way, I wish you all the best and never be safe!