Electromagnetic pulse valve installation

When installing electromagnetic pulse valve, please note the following:

1. The excellent installation method of the solenoid valve is vertical to the horizontal pipeline with the coil upward. Â±30Â° tilt allowed when conditions do not allow. Otherwise, normal use cannot be guaranteed.

2. The parameters on the nameplate of the solenoid valve should be consistent with the actual requirements.

3. The arrow on the solenoid valve body should be consistent with the medium flow direction.

4. In order to ensure the normal use of the solenoid valve, install a water separator in front of the solenoid valve.

5. In the hazardous environment, explosion-proof solenoid valves should be used to prevent sparks from causing explosions and other accidents.

6. Before the installation, please purge the air bag and the pipeline to avoid damage to the diaphragm caused by the foreign material.

7. When the solenoid valve is faulty, it is recommended to install a bypass (bypass) device for timely isolation and easy maintenance.

8, when the solenoid valve is not installed temporarily, it can be stored in 0 ~ 40 Â°C, relative humidity â‰¤ 80%, but no corrosive gas in the room, as far as possible to avoid open storage.

9, after opening the box should first check the instruction manual, factory certificate, packing list is complete. According to the list, check whether the product name and model are consistent, and check if the nameplate matches the purchase order. If there is a defect or discrepancy, contact the manufacturer in time to find a solution.

High Speed Stacking Door

Material Selection:

1. Frame: 2MM thicknesses cold-roll Stainless steel.

2. Motor: Germany SEW brake motor (outer), power 0.75KW, power supply 220V.

3. Control system: Imported Japan Mitsubishi converter and PLC to control of electric box (150%1HZ)

4. Opening & closing speed: 0.6-1.5m/s (adjustable).

5. Safety Device: Korea Photocell Sensor, emergency stopping reaction when sensing obstacles.

6. Curtain: France high-density polyester fiber and the surface coating processing, thickness 0.8MM, variety colors can be chose: Red, yellow, blue, green, orange, gray, white, transparent, etc. Tensile strength: 4000/3500N/5cm, tear strength 600/600N. Fire-proofing level: German standard DIN75200 Usage temperature: -30 Â° C +70 Â° C.

7. Wind resistant: The Aluminium alloy Reinforce Girder to increase wind resistant effect.

8. Curtain replacement function: Aluminium alloy Reinforce Girder is loaded between 2 pieces Curtain, can be replaced easily if any curtain broken, save your cost.

9. Transparent window: 1.2MM thickness transparent PVC window, size and location is up to your request, more safer.

10. Seal: Seal brush are Installed inside the guides, and the special bottom design, to fit any uneven ground.

11. Cotrolling way: Push button + radar sensor, very convenient.

12. Limiting Switch: Mechanical limiting switch, easily and exactly.

13. Emergency STOP: With emergency stop button on control panel, can stop easily by

Hand once disconnect or accident

14 Fault recovery function: All Hongfa's production is with fault recovery function, system will self-recovery after power cut off.

15. Delivery time: About 7 business days with contract and deposit confirmed.

16. Pyament item: 50% before production, and the other 50% before shipment.

17. Warranty Details: We provide 12 months warranty for all doors and accessories (except man-made disasters, Irresistible natural disasters, ect^).

We have many professional engineers with rich experience, qualified products, perfect service system, and good cooperation relationship with many famous companies.

High Speed Stacking Door, High Speed Stack Door, PVC high speed stacking door, Rapid stacking door, Fast stacking door

SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfafrud.com