Galvanized W-Beam Highway Guardrails Roll Forming Machine Manufacturer for Indonesia
highway guardrail Dimension:4320(L)*310(W)*85(H) Material:steel Q235 or Q345 Certificate:GB/T19001-2008/ISO9001:2008 |
highway guardrail Hot dip galvanized guardrail surface treatment:galvanized,aluminized,static sprayed Dimension:4320(L)*310(W)*85(H) Standars with hot galvanized:≥61um and 85um on average  Thickness:3.0mm or 4.0mm Material:steel Q235 or Q345 Features :great corrosion,resisitant,high intensity and durable The colour can be changed according to your request |
Equipment structure:
Â
De-coiler--- flatting --- punching --- fast feeding --- opto-electrical cutting --- forming --- alignment device --- collection table--- control system --- forming moulds
Technique data:
1, Total power of equipment is 90kw
2, Maximum height of profiles formed: 85mm
3, Maximum thickness: 4.0mm
4, Maximum forming speed: 15m/min
5, The welding machine body structure follow to the requirement, the welding follow to the national welding standard.
6, The equipment after antirust processing, brush antirust paint first, the antirust paint must cover comprehensively, then brush the high quality finish paint. The movable part shows the different color for caution.
NO. |
Project | Unit | Parameter | Remark | |
1 |
Material |
Type | Mild steel Galvanized sheet | ||
Strength of material sheet | Map | ≥350 | |||
Thickness of material sheet | mm | 3~4 | |||
2 | Size of production | mm |    Reference the picture | ||
3 | Production speed | m/min | 6 | ||
4 | Material of roller  |
GCr15 quenching treatment | |||
5 | Drive type | Gear box | |||
6 | Power | kw | About 64 | ||
7 | Electric control system | PLC variable frequency control | |||
8 | Dimensions(Length*width*height) | m | 35X4X3.9 |
[Trim Removal Tool]
This Automotive Trim Removal Tool is convenient for detaching parts of automobile interior, exterior parts, easily to remove dash, door components and update car speakers etc. This Automotive Tools can prevent your car from scratching and damaging. 4pcs panel removal tool was made by high quality polypropylene. It has good impact resistance and toughness to ensure that it will not break during use. Ergonomic design with lightweight, easy hand-held that effectively effort saving for various interior and exterior car trimming in the shortest time.
[Installation Tools]
This automotive installation tools are daily used great for professional wrapper and novice to install auto solar window tint, paint protection films,vehicle wraps,car decals.
Effectively scrape off the soap water and air bubbles. This remove&installation tools are suitable for all edges and corners, dry and wet surfaces. A complete installation tool kit with long handle and small squeegees provide you a smooth and wonderful wrapping experience.
[OBD Inspection Oil Service Reset Tool for BWM]
This OBD Inspection Oil Service Reset Tool is small and easy to carry.Easy to use, no batteries needed.Reset Inspection and Oil Service.
Use this tool to RESET the 'INSPECTION' & 'OIL SERVICE' reminders on your BMW (1982-2001)
Instructions:
Plug the device into the 20 pin diagnostic socket of your car;
Turn the ignition on, but do not start the engine;
Press the button for the operation you want to perform;
The LED of the chosen operation will turn on;
Keep the button pressed;
Reset is done when the LED turns off automatically;
Release button.
Remove Installation Reset Tools
Remove Installation Reset Tools,Clean Up Tool,Removal Tool,Uninstaller Tool
Shenzhen Cartrend Technology Co, Ltd , https://www.cartrendthings.com