Global Power over Ethernet ports increase over 100 million
The most typical example of a remotely-powered device in everyday life is a phone that can hold calls even in the event of a power outage. Currently, the number of network device ports with Power over Ethernet (PoE) is growing at more than 100 million units per year.
In a white paper recently released on "The Advantages of Using Simon Shielding Cabling Systems to Power Remote Network Devices," Simon Corporation of the United States said that a new 4-pair IEEE 802.3 PoE application based on advanced standard technology could be implemented in twisted pair Sending up to 100 watts of power on a wire-based copper cable to support video delivery has revolutionized the look and feel of the IT world. Simon's latest white paper shows the impact of the ever-increasing number of devices powered by remote powered technology and the diversity of devices, so the proper network cabling is chosen to eliminate the risk of damage from contact arcs and temperature rise. The arc created when the device is under a mismatched load can cause damage to the integrity of the connector contacts and temperature rise in the cable harness can result in higher insertion loss, failure, and downtime.
This white paper provides valuable information on the benefits of shielded Category 6A and 7A shielded hardware and advanced shielded cabling that fully comply with IEC-60512-99-001 when deploying remote power and has requirements for related standards Overview and provides an example of connector design to ensure that the module and jumper plugs are protected from damage to their key mounted contact surfaces under mating and mismatched conditions at long range power loads. IEEE 802.3 4-to-Power over Ethernet Working Group was updated.
"With the growth of the remote-powered IP-equipment market and the development of more advanced power supply technologies, the ability of cables and connectors to operate under DC load has become a key factor," said Valerie Maguire, global sales engineer at Simon. "Fortunately, all Simon's Z-MAX Shield Category 6A and TERA Shield Category 7A cables and connectivity hardware have proven to ensure consistent and reliable transmission performance and contacts in the operating environments required for advanced remote powering applications Integrity, and we hope this white paper will help the industry understand the effect of using copper balanced twisted pair cables on remotely powered IP equipment, while underscoring the benefits of Simon Shield's cabling system for these applications. "
Hydroxypropyl Cellulose,Industrial Grade Adhesives,Hydroxypropyl Cellulose Degradation,Industrial Grade Hydroxypropyl Cellulose
Henan Kepeiao New Materials Co.,Ltd. , https://www.kopeochem.com