Good helper for HLZ5210TSCC60 oil field operation
The HLZ5210TSCC60 flushing and washing well water treatment vehicle is one of the fine professional vehicle varieties of Panjin Liaohe Oilfield Huanli Special Purpose Vehicle Manufacturing Co., Ltd. Panjin Liaohe Oilfield Hualili Special Purpose Vehicle Manufacturing Co., Ltd. is the only company specializing in manufacturing oil-modified vehicles in Liaohe Oilfield. It is a member of the first-tier supply network of China National Petroleum Equipment Manufacturing Corporation. Located in Xinglongtai District, Panjin City, Liaoning Province, high-tech oil equipment industry park.
The sand flushing liquid processing truck is mainly used for sand washing operations in oil fields, and separates the oil, water, and sand from the flushing liquid used during the flushing operation. The secondary swirling sand remover can be used in liquids. 99% of the sand is collected and discharged to the designated place; 80% of the oil in the flushing liquid is recovered by the oil-water separation system; the circulating sand flushing operation is achieved through the triplex plunger pump to achieve crude oil recovery, water recycling, sand site emissions or The overall purpose of the environmental operation discharged to the designated location. The sand-washing vehicle was independently developed by Tonghua Petrochemical Machinery Manufacturing Co., Ltd. The successful development of the flushing sand treatment truck has realized the organic combination of sand flushing operation and water treatment process, and can replace the well flushing truck to perform well flushing operation. It is used in one machine to change the high pollution and high water consumption status of the traditional sand washing process in the oil field. It eliminates the cost of configuring various special equipment.
HLZ5210TSCC60 flushing and washing well water treatment truck, sand washing fluid treatment truck mainly consists of loading chassis, transfer case, three-cylinder plunger pump, double-stage cyclone sand remover, flushing sand processing system, floating oil collecting system, float Oil storage, self-priming pump system, fluid system, electrical system, pipeline valve system, pay frame and other components. The vehicle and the cement truck cooperate to separate oil, water and sand from the flushing liquid returned during the flushing operation. Through the secondary swirl sand remover (Weihai Haiwang), more than 98% of the liquid sand can be collected and discharged to the designated place; more than 85% of the crude oil in the washed sand can be recovered through the oil-water separation treatment system. The organic combination of sand washing operation and water treatment process was realized, which changed the status of the high pollution and high water consumption of the traditional sand washing process. The relevant specific technical parameters of HLZ5210TSCC60 are as follows: Chassis type: heavy-duty vehicle ZZ1257M4647C, total vehicle mass: 25000kg, overall dimensions of the vehicle: 10000*2500*3965, engine power: 193KW, rotation speed: 2100rpm.
1. The HLZ5210TSCC60 flushing and washing water treatment vehicle also has the following features:
2. Sanding operations can be performed continuously to achieve green operations and clean production.
3. The disposal of sandwater oil saves a lot of water resources, and the recovered crude oil has greater economic benefits.
4. The self-priming pump adopts hydraulic drive, no external power supply, safe and reliable.
5, high sand removal rate, high oil recovery.
6. Hydraulic control is adopted. The operation is simple and flexible. It is equipped with liquid level control, which facilitates flow balance and oil recovery.
The oil reservoir is equipped with an oil tube heater (220V/5000W) to prevent solidification of crude oil at low temperatures, which facilitates the discharge of crude oil (an external power supply is required for oil tube heaters).
We have supplied our Lighting poles to Australia, Columbia, England, Kuwait, Iraq, Philippines, Pakistan and etc.
Our Lighting poles are made from quality sheet through bending, forming, automatic welding and hot galvanization. We can reach one-run machining length of 14m and can bend sheet of thickness up to 45mm. We adopt advanced welding procedures, automatically weld main joints and reach rank-II welding quality.
Lighting Pole, Transmission Line Pole, Solar Lighting Pole, Single Arm Lighting Pole
Jiangsu Xinjinlei Steel Industry Co., Ltd. , https://www.jinleisteelpole.com