• Posted on

High Output Peanut Hulling with Hydraulic System

Model NO.: YBKG35*150
Trademark: DETAI
Transport Package: as Client Requirement
Specification: 260*130*211cm
Origin: Dalian, Liaoning, China
HS Code: 8479200000
Model NO.: YBKG35*150
Trademark: DETAI
Transport Package: as Client Requirement
Specification: 260*130*211cm
Origin: Dalian, Liaoning, China
HS Code: 8479200000
High output peanut hulling with Hydraulic System
The sheller passes the upper and lower pairs of relatively rotating tooth roller, and the material like cottonseed shell falls under the action of gravity to the sheller roller. After the speed difference of the high speed rotating roller, after two consecutive extrusions and shears cutting and stripping, the shell is broken, and the inner shell of the shell is fully exposed for the purpose of shelling.
The machine has strong adaptability and can separate and crush cottonseed, soybean, sunflower seeds and peanuts, especially for shelling and separating with cottonseed. The process route is simplified, the floor space is small, and the whole kernel rate is high. , kernel contains less shells, reduces oil loss, increases equipment handling, and reduces equipment wear. It is a key pretreatment equipment in the oil industry.
YBKG Double Pair Tooth Roller Sheller
YBKG35 machine adopts single motor drive, square structure bearing seat, and it is convenient to realize synchronous adjustment of roller gap; it has independent intellectual property rights. (Patent No.: ZL201220182528.1)
1. Technical features
1) It is processed by special tooth roller, with high output and good shelling effect;
2) Centrifugally cast alloy tooth roller with high hardness and toughness and long service life.
3) Humanized design, operability and ease of use;
4) Adjustable roller gap and anti-collision function on the roller to ensure safe running of the roller;
5) Many functions, stable and reliable performance;
6) Simple structure, centralized lubrication, convenient maintenance and maintenance;
7) Fully enclosed protection with safety warning sign.
2.Technical parameters
Model Capacity(T/24h) Power
(Kw) 		Hulling rate 
% 		Power degree 
% 		Outside dimensions(mm) Weight
(T)
YBKG25*100 120~150 15*2+0.55 ≥99 ≤5 1900×780×1910 ~3
YBKG25*125 160~180 18.5*2+0.55 ≥99 ≤5 2200×780×1910 ~3.5
YBKG30*100 160~190 18.5*2+0.55 ≥99 ≤5 1950×900×2130 ~4.3
YBKG30*125 200~220 22*2+0.55 ≥99 ≤5 2230×900×2130 ~4.8
YBKG35*100 150~180 30+0.55 ≥99 ≤5 1994×1378×2208 ~6
YBKG35*150 260~300 55+0.75 ≥99 ≤5 2494×1378×2208 ~8
YBKG35*190 500~550 90+1.1 ≥99 ≤5 2894×1378×2208 ~10
YBKG40*100 180~220 18.5*2+0.75 ≥99 ≤5 2050×1200×2310 ~6
YBKG40*125 220~260 22*2+0.75 ≥99 ≤5 2300×1200×2310 ~7
YBKG40*150 260~300 30*2+0.75 ≥99 ≤5 2550×1200×2310 ~8
Note:
According to the user's special specifications, it can be customized according to requirements.
High Output Peanut Hulling with Hydraulic System
High Output Peanut Hulling with Hydraulic System
High Output Peanut Hulling with Hydraulic System
High Output Peanut Hulling with Hydraulic System
High Output Peanut Hulling with Hydraulic System


 
High output peanut hulling with Hydraulic System
The sheller passes the upper and lower pairs of relatively rotating tooth roller, and the material like cottonseed shell falls under the action of gravity to the sheller roller. After the speed difference of the high speed rotating roller, after two consecutive extrusions and shears cutting and stripping, the shell is broken, and the inner shell of the shell is fully exposed for the purpose of shelling.
The machine has strong adaptability and can separate and crush cottonseed, soybean, sunflower seeds and peanuts, especially for shelling and separating with cottonseed. The process route is simplified, the floor space is small, and the whole kernel rate is high. , kernel contains less shells, reduces oil loss, increases equipment handling, and reduces equipment wear. It is a key pretreatment equipment in the oil industry.
YBKG Double Pair Tooth Roller Sheller
YBKG35 machine adopts single motor drive, square structure bearing seat, and it is convenient to realize synchronous adjustment of roller gap; it has independent intellectual property rights. (Patent No.: ZL201220182528.1)
1. Technical features
1) It is processed by special tooth roller, with high output and good shelling effect;
2) Centrifugally cast alloy tooth roller with high hardness and toughness and long service life.
3) Humanized design, operability and ease of use;
4) Adjustable roller gap and anti-collision function on the roller to ensure safe running of the roller;
5) Many functions, stable and reliable performance;
6) Simple structure, centralized lubrication, convenient maintenance and maintenance;
7) Fully enclosed protection with safety warning sign.
2.Technical parameters
Model Capacity(T/24h) Power
(Kw) 		Hulling rate 
% 		Power degree 
% 		Outside dimensions(mm) Weight
(T)
YBKG25*100 120~150 15*2+0.55 ≥99 ≤5 1900×780×1910 ~3
YBKG25*125 160~180 18.5*2+0.55 ≥99 ≤5 2200×780×1910 ~3.5
YBKG30*100 160~190 18.5*2+0.55 ≥99 ≤5 1950×900×2130 ~4.3
YBKG30*125 200~220 22*2+0.55 ≥99 ≤5 2230×900×2130 ~4.8
YBKG35*100 150~180 30+0.55 ≥99 ≤5 1994×1378×2208 ~6
YBKG35*150 260~300 55+0.75 ≥99

Die casting(Aluminium Die Casting) is a metal casting process that is characterized by forcing molten metal under high pressure into a mold cavity. The mold cavity is created using two hardened tool steel dies which have been machined into shape and work similarly to an injection mold during the process. Most die castings are made from non-ferrous metals, specifically zinc, copper, aluminium, magnesium, lead, pewter and tin based alloys. Depending on the type of metal being cast, a hot- or cold-chamber machine is used.


The casting equipment and the metal dies represent large capital costs and this tends to limit the process to high volume production. Manufacture of parts using die casting is relatively simple, involving only four main steps, which keeps the incremental cost per item low. It is especially suited for a large quantity of small to medium-sized castings, which is why die casting produces more castings than any other casting process.[1] Die castings are characterized by a very good surface finish (by casting standards) and dimensional consistency.

Two variants are pore-free die casting, which is used to eliminate gas porosity defects; and direct injection die casting, which is used with zinc castings to reduce scrap and increase yield.

Aluminum Die Casting

Aluminum Die Casting, Die Casting Components, Pneumatic Zinc Die Casting, Zin Die Casting,Aluminium Die Casting

NINGBO BRANDO HARDWARE CO.,LTD , https://www.brandopneumatic.com