High Wearable Polyamide Casting Nylon Pipe
These Polyamides, commonly referred to as Nylon and available in Sheets, Rod and Tube and are distinguished by different types.  Nylon stock shapes are produced by either extrusion or casting. The process is in part a determinant of the nylon properties of the end product. Modifiers are added to enhance desirable characteristics.Nylon Rod, Nylon Sheet and Nylon Tubes are tough, durable, general purpose engineering material with special grades for specialty applications. Typical application conditions would be medium speed and temperature in a rugged, abrasive, impact and high load environmen
Characteristics
-Excellent wear resistance
-Good sliding properties
-High strength and toughness
-Self-lubricating
-Resistant to oil, weak acid and alkali
-Shock absorption
-Noise absorption
-Good electrical properties
Application
drainpipe,water supply pipe,wire and cable pipe,Agricultural Irrigation Pipe,Corrugated Pipe
Picture
1.MC Nylon Tube
Specification:
Length: 1-6 Meters or customized length,
IN Dia :50-160mm
Thickness :Â Â Equal or More than 8mm
Â
Our Service
1)Your inquiry will be replied within 2Â hours during working time,Within 24hours when rest time.
2)Our working time is 8.30 AM --17:30 PM,Monday to Friday.
3)General samples time can be arranged within 2--5days.
4)Orders will be produced exactly as request and approved samples.
5)When mass production,we send photos to show the production line.And confirm the estimate time again.
6)At the end of mass production,photos and samples will send to you for approval.You can arrange the inspection.
7)Before shipment,our QC will have inspection to make sure the quality.
8)We always try best to ensure every order to delivery in time.
Â
Payment Terms
1)T/T,Cash,L/C.
2)30% deposit,70% balance before shipment.
3)Lead time: 15 days after received deposited for 2tons.
4)Delivery way: By sea,By air, By EMS,DHL,UPS,TNT,FedEx.
Â
Packing &Â Delivery
For sample: By EMS,DHL,UPS,TNT,FedEx
                 around 5--7 working days to arrive
Â
For Bulk order:
1.Qty of 2tons,within 15 days.
2.Via Sea
3.Delivery time:we will finish production in 15days for 2tons.
4.For 20 GP,may nee around 30days.
Our Company
We are amongst the leading mfr & exporters of Cast - nylon sheets ,rod,tubes,gear,pulley &bush etc. Our ability to customize and delivery products on time, has made as a preferred name to business with the company was incorporated as in the year 1986 to manufacture Cast - nylon. This is the part polymer family which is a highly radical products having highly strong Eng. Qualities
Since Team of "Jiangsu Hongfa Engineering" is having sound technical background, our  team is serving many industries with technical consultancy in above polymers. Being a technical people & knowledge of end applications, it becomes very easy for our customers to select a right polymers resulting No R & D cost for end users.
"Jiangsu Hongfa Engineering" has capability to fabricate/ manufacture by way of machining any components in any shape as per customer drawings &Â specifications in above polymers.
At "Jiangsu Hongfa Engineering" we believe in growth through continuous up gradation of our products &Â services in line with the latest technologies for production of these modern engineering polymers.
FAQ
1. Q: What color can you make?
A: Usually we can make the regular color, like red, yellow, blue, green, grey and so on. Or you can offer the pantone color number for reference to produce.
 2.Q: What is your MOQ?
A: 10 PCS
 3. Q: What is your delivery time?
A: It depends on the volume, usually it is about 7Â days.
 4. Q: How can I get a sample?
A: Small size of sample are free, you only need to pay for the shipping cost, or you can provide your UPS, DHL, Fedex, TNT courier account to us. Customized size of sample should be charged.
 5. Q: What is your payment term?
A: Small order ,we accept by T/T,western union, paypal, .Bulk quantity order ,30% T/T in advance, 70% balance before shipment. Other terms negotiable.
 6.Do you have custom service ?
A:Yes, as an OEM manufacturer ,we offer custom service as per your drawing or sample .
Contact usÂ
Sophia Chen
Â
Â
Mobile: 8613921841400
Â
Â
 Product Description
These Polyamides, commonly referred to as Nylon and available in Sheets, Rod and Tube and are distinguished by different types.  Nylon stock shapes are produced by either extrusion or casting. The process is in part a determinant of the nylon properties of the end product. Modifiers are added to enhance desirable characteristics.Nylon Rod, Nylon Sheet and Nylon Tubes are tough, durable, general purpose engineering material with special grades for specialty applications. Typical application conditions would be medium speed and temperature in a rugged, abrasive, impact and high load environmen
Characteristics
-Excellent wear resistance
-Good sliding properties
-High strength and toughness
-Self-lubricating
-Resistant to oil, weak acid and alkali
-Shock absorption
-Noise absorption
-Good electrical properties
Application
drainpipe,water supply pipe,wire and cable pipe,Agricultural Irrigation Pipe,Corrugated Pipe
Picture
1.MC Nylon Tube
Specification:
Length: 1-6 Meters or customized length,
IN Dia :50-160mm
Thickness :Â Â Equal or More than 8mm
Â
Our Service
1)Your inquiry will be replied within 2Â hours during working time,Within 24hours when rest time.
2)Our working time is 8.30 AM --17:30 PM,Monday to Friday.
3)General samples time can be arranged within 2--5days.
4)Orders will be produced exactly as request and approved samples.
5)When mass production,we send photos to show the production line.And confirm the estimate time again.
6)At the end of mass production,photos and samples will send to you for approval.You can arrange the inspection.
7)Before shipment,our QC will have inspection to make sure the quality.
8)We always try best to ensure every order to delivery in time.
Â
Payment Terms
1)T/T,Cash,L/C.
2)30% deposit,70% balance before shipment.
3)Lead time: 15 days after received deposited for 2tons.
4)Delivery way: By sea,By air, By EMS,DHL,UPS,TNT,FedEx.
Â
Packing &Â Delivery
For sample: By EMS,DHL,UPS,TNT,FedEx
                 around 5--7 working days to arrive
Â
For Bulk order:
1.Qty of 2tons,within 15 days.
2.Via Sea
3.Delivery time:we will finish production in 15days for 2tons.
4.For 20 GP,may nee around 30days.
Our Company
We are amongst the leading mfr & exporters of Cast - nylon sheets ,rod,tubes,gear,pulley &bush etc. Our ability to customize and delivery products on time, has made as a preferred name to business with the company was incorporated as in the year 1986 to manufacture Cast - nylon. This is the part polymer family which is a highly radical products having highly strong Eng. Qualities
Since Team of "Jiangsu Hongfa Engineering" is having sound technical background, our  team is serving many industries with technical consultancy in above polymers. Being a technical people & knowledge of end applications, it becomes very easy for our customers to select a right polymers resulting No R & D cost for end users.
"Jiangsu Hongfa Engineering" has capability to fabricate/ manufacture by way of machining any components in any shape as per customer drawings &Â specifications in above polymers.
At "Jiangsu Hongfa Engineering" we believe in growth through continuous up gradation of our products &Â services in line with the latest technologies for production of these modern engineering polymers.
FAQ
1. Q: What color can you make?
A: Usually we can make the regular color, like red, yellow, blue, green, grey and so on. Or you can offer the pantone color number for reference to produce.
 2.Q: What is your MOQ?
A: 10 PCS
 3. Q: What is your delivery time?
A: It depends on the volume, usually it is about 7Â days.
 4. Q: How can I get a sample?
A: Small size of sample are free, you only need to pay for the shipping cost, or you can provide your UPS, DHL, Fedex, TNT courier account to us. Customized size of sample should be charged.
 5. Q: What is your payment term?
A: Small order ,we accept by T/T,western union, paypal, .Bulk quantity order ,30% T/T in advance, 70% balance before shipment. Other terms negotiable.
 6.Do you have custom service ?
A:Yes, as an OEM manufacturer ,we offer custom service as per your drawing or sample .
Contact usÂ
Sophia Chen
Â
Â
Mobile: 8613921841400
Â
Â
Â
Leisuwash DG Automatic Car Wash
Leisuwash specializing in manufacture Automatic Car Wash Machine, Touchless Car Wash , Automatic Touchless Car Wash, touchless car wash equipment, robot car wash, smart car wash system, leisuwash 360, leisuwash leibao 360, laserwash 360, Leisuwash DG, leisuwash touchless car wash machine, leisu wash touchless car wash automatic, leisu wash 360 high pressure touchless car wash equipment, robo car wash, touch free car wash, leisuwash 360 touch free car wash, leisuwash 360 price, automatic car wash price, leisuwash in malaysia, no touch automatic car wash machine.
Leisuwash 360 touchless car wash machine high intelligent high quality, with car wash + car care + drying process totally, each car wash takes time 1 minute to 5 minutes which depends on the car wash mode.
The newest LeisuWash inbay Automatic Car Wash raises the standard for Touchless Car Wash Equipment. With Revenue Enhancement and Total Cost of Ownership improvements being the main focus, this vehicle wash system delivers the industry`s best Return on Investment. Smart 360â„¢ Technology enables the car wash system to be responsive to the dynamic conditions in the wash bay and allows it to [think for itself", increasing up-time and optimizing the wash process.
Washtec Car Wash Equipment,High Pressure Touchfree Car Washing,Touchfree Car Washing,Automatic Car Wash Machine
Hangzhou Leisu Cleaning Equipment Co.,Ltd , https://www.sdleisuwashtouchless.com