Industrial Single Stage Rotary Vane High Vacuum Pump
Â
Brief introduction
1.XD industrial rotary vane high vacuum pump is a single stage mono-block pump, this series vacuum pumps suck or compress air from the container.Â
2.It has an oil return structure, the pump oil is kept from returning to the sucking system.
3.Application is air and any other gas which is non-corrosive, insoluble in water and without solids.
4.Air or gas contains a small amount of liquid isallowed.
5. It is mainly used to food vacuum packing, pharmaceutical, paper, printing machines, glass, vacuum clamps, industrial conveyor, drying industry and other units.
Â
Â
Â
Product details
Working Principle: |
Vane, oil seal, etc |
Main applications:Â Â |
Air & Gas |
Driver: |
Electric motor |
Power Specs: |
220/380/415V 3phase; 110/220/240V 1phase; 50hz/60hz |
Max.permissible fluid temperature: |
50°C(122°F) |
Type of connection: |
Barb |
Installation position: |
Horizontal |
Casing/Inner parts material: |
Cast iron |
Shaft seal type:Â Â |
Oil seal |
Free passage:Â Â |
0mm |
Limited vacuum: |
200pa(2×10-3bar) |
Maximum drive rating:Â |
7.5KW(10HP) |
Maximum caliber:Â Â |
G2 1/2"mm |
Flow rate range:Â Â |
10-250m3/h(5.88-147.1CFM) |
Â
Â
Brief introduction
1.XD industrial rotary vane high vacuum pump is a single stage mono-block pump, this series vacuum pumps suck or compress air from the container.Â
2.It has an oil return structure, the pump oil is kept from returning to the sucking system.
3.Application is air and any other gas which is non-corrosive, insoluble in water and without solids.
4.Air or gas contains a small amount of liquid isallowed.
5. It is mainly used to food vacuum packing, pharmaceutical, paper, printing machines, glass, vacuum clamps, industrial conveyor, drying industry and other units.
Â
Â
Â
Product details
Working Principle: |
Vane, oil seal, etc |
Main applications:Â Â |
Air & Gas |
Driver: |
Electric motor |
Power Specs: |
220/380/415V 3phase; 110/220/240V 1phase; 50hz/60hz |
Max.permissible fluid temperature: |
50°C(122°F) |
Type of connection: |
Barb |
Installation position: |
Horizontal |
Casing/Inner parts material: |
Cast iron |
Shaft seal type:Â Â |
Oil seal |
Free passage:Â Â |
0mm |
Limited vacuum: |
200pa(2×10-3bar) |
Maximum drive rating:Â |
7.5KW(10HP) |
Maximum caliber:Â Â |
G2 1/2"mm |
Flow rate range:Â Â |
10-250m3/h(5.88-147.1CFM) |
Â
1. The whole machine is designed according to JB/T2257.2-92(China National standard) "plate bending machine technical conditions"and GB/T14349-93 "plate bending machine precision", all the parts of this machine are using computer graphics, computer element analysis, computer aided manufacturing,use CAD, CAE, CAM software for machine structure design, and fully guaranteed the structural strength enough and rigid of each machine component.
2.The whole steel frame welded structure, made the press brake thick, high rigidity, strong shock anti-knock.
3.Allocate breaking that the DELEM company produces bending machine special use numerical control system (or customer specify other shears to fold numerical control system);
4.Rear material(X), smooth piece route or distance of travel(Y) control equal reason computer autocontrol;
5.Rear material adopt the average silk pole and precise ball two kind silk poles;
6. Machine steel plate welded strure, using VSR elimimate internal stress, high mechanical strength and good rigidity.
7.Hydraulic double cylinders on the drive, mechanical block, twisting axis synchronization, smooth and reliable operation, high precision.
Bending Machine,Cnc Bending Machine,Hydraulic Bending Machine,Hydraulic Stainless Steel Bending Machine
Tengzhou Borui CNC Machine Tool Co,.Ltd , https://www.br-cnc.com