• Posted on

Industrial Water Cooled Air Chiller for Cold Storage System

Model NO.: ZTFC
Certification: ISO, CE, BV, CCS, Dnv
Condition: New
Tube Diameter: 7mm, 7.94mm, 9.52mm, 12.7mm, 15.88mm, 16mm
Compressor: Bitzer,Refcomp,Copeland or Customized
Trademark: Zeniya
Transport Package: Polywood Case
Specification: customerized
Origin: Taixin City, Jiangsu, China
Model NO.: ZTFC
Certification: ISO, CE, BV, CCS, Dnv
Condition: New
Tube Diameter: 7mm, 7.94mm, 9.52mm, 12.7mm, 15.88mm, 16mm
Compressor: Bitzer,Refcomp,Copeland or Customized
Trademark: Zeniya
Transport Package: Polywood Case
Specification: customerized
Origin: Taixin City, Jiangsu, China
Industrial water cooled Air Chiller for Cold Storage System

ABOUT PRODUCT

1. The fins produced are of very high standard of quality having flare position made of plain, Wave type.
2. The edge of fins can be straight or ripple depending upon application.
3. All the coils are 100% tested for leakages and passed through the heating oven with the air circulation for inside and outside cleaning and charged nitrogen.
4. The mechanical bullet expansion of copper tube to fin ensures efficient heat Transfer of condensers and evaporators.
5. The row material of excellence: We source only the best quality raw material from around the world, to manufacture heat exchangers that are of globally acceptable standards.
6. Plain copper pipe of 7mm, 7.94mm, 9.52mm, 12.7mm, 15.88mm, 16mm diameter.
7. Aluminum foil in blue color with hydrophilic and bio(Health) properties.

Features:
1. Material: Copper, aluminum, galvanized plate
2. Aluminum foil: Hydrophilic or bare
3. Fin type: Louver fin or flat fin or corrugated fin
4. Copper pipe: Diameter 7mm, 7.94mm, 9.52mm, 12.7mm, 15.88mm, 16mm grooved or smooth tube
5. Pitch of fins can be adjusted between 1.3-8.0mm.
6. Pitch of holes and pitch of rows: see below excel sheet
7. Suitable for R134A, R22, R404A, R407C refrigerant and so on
8. Voltage: 220V/1/50Hz and 380V/3/50Hz or other type.
9. Different alternative condensing fans available: Shaded pole or outer rotor fan motor.
10. Did gas examination under 3.0Mpa air pressure to ensure the tightness.
11. Widely used in refrigeration industry, cold room and other cooling system.
12. We can supply products as per customized samples or drawing.
13. Producing procedure: Tube bending, punching fin, expanding, digressing, drying, Welding, leakage test, bending, inspection, packing.
 
No. Tube Diameter (mm) Pitch of Hole/Row (mm) Fin Style Fin Space (mm)
1 Φ7 21*12.7 Grooved Fin, Plain Fin, Sine Wave Fin 1.4-2.0
2 Φ7 21*18.19 Sine Wave Fin, Bridgewave Fin 1.3-1.9
3 Φ7.94 25.4*15.875 Grooved Fin, Plain Fin, Sine Wave Fin 1.6-6.35
4 Φ9.52 25.4*22 Grooved Fin, Sine Wave Fin 1.6-3.2
5 Φ9.52 25.4*22 Grooved Fin, Plain Fin, Sine Wave Fin 1.4-3.2
6 Φ9.52 25*19 Grooved Fin, Plain Fin, Sine Wave Fin 2.0-3.8
7 Φ9.52 25*21.65 Grooved Fin, V Ripple Fin 1.6-3.2
8 Φ9.52 25*25 Plain Fin 2.0-6.0
9 Φ9.52 25*21.65 Plain Fin 2.0-6.0
10 Φ9.52 25.4*22 Grooved Fin, Plain Fin, Sine Wave Fin 1.6-6.35
11 Φ9.52 31.75*27.5 Grooved Fin, Plain Fin, Sine Wave Fin 1.6-6.35
12 Φ12.7 31.75*27.5 Plain Fin, Sine Wave Fin, V Ripple Fin 1.8-6.0
13 Φ15.88 38*32.9 V Ripple Fin 1.5-4.5
14 Φ16 38*32.9 V Ripple Fin 2.5-6.0
15 Φ16 55*27.5 Plain Fin, Sine Wave Fin 5.0-8.0
Industrial Water Cooled Air Chiller for Cold Storage System

ABOUT COMPANY

Zeniya Refrigeration and Air Condition Equipment Co., Ltd is a manufacturer established in 2007.
Plant area 10000m3
Production value USD 4,000,000
Zeniya own testing lab, various CNC machine, and can provide perfect after-sale service.
Zeniya focus on quality improvement and cost control. That's why we were born as marine air conditioner OEM factory and developping into top supplier of marine air conditioner in China.
Now we expand our business into air conditioning and refrigeration application in various area such as building, agriculture, commerical, industry etc.  

Your confusions will get prompt attention.
 Industrial Water Cooled Air Chiller for Cold Storage System

Industrial Water Cooled Air Chiller for Cold Storage System
Industrial Water Cooled Air Chiller for Cold Storage System

                                             Industrial water cooled Air Chiller for Cold Storage System

ABOUT PRODUCT

1. The fins produced are of very high standard of quality having flare position made of plain, Wave type.
2. The edge of fins can be straight or ripple depending upon application.
3. All the coils are 100% tested for leakages and passed through the heating oven with the air circulation for inside and outside cleaning and charged nitrogen.
4. The mechanical bullet expansion of copper tube to fin ensures efficient heat transfer of condensers and evaporators.
5. The row material of excellence: We source only the best quality raw material from around the world, to manufacture heat exchangers that are of globally acceptable standards.
6. Plain copper pipe of 7mm, 7.94mm, 9.52mm, 12.7mm, 15.88mm, 16mm diameter.
7. Aluminum foil in blue color with hydrophilic and bio(Health) properties.

Features:
1. Material: Copper, aluminum, galvanized plate
2. Aluminum foil: Hydrophilic or bare
3. Fin type: Louver fin or flat fin or corrugated fin
4. Copper pipe: Diameter 7mm, 7.94mm, 9.52mm, 12.7mm, 15.88mm, 16mm grooved or smooth tube
5. Pitch of fins can be adjusted between 1.3-8.0mm.
6. Pitch of holes and pitch of rows: see below excel sheet
7. Suitable for R134A, R22, R404A, R407C refrigerant and so on
8. Voltage: 220V/1/50Hz and 380V/3/50Hz or other type.
9. Different alternative condensing fans available: Shaded pole or outer rotor fan motor.
10. Did gas examination under 3.0Mpa air pressure to ensure the tightness.
11. Widely used in refrigeration industry, cold room and other cooling system.
12. We can supply products as per customized samples or drawing.
13. Producing procedure: Tube bending, punching fin, expanding, digressing, drying, Welding, leakage test, bending, inspection, packing.
 
No. Tube Diameter (mm) Pitch of Hole/Row (mm) Fin Style Fin Space (mm)
1 Φ7 21*12.7 Grooved Fin, Plain Fin, Sine Wave Fin 1.4-2.0
2 Φ7 21*18.19 Sine Wave Fin, Bridgewave Fin 1.3-1.9
3 Φ7.94 25.4*15.875 Grooved Fin, Plain Fin, Sine Wave Fin 1.6-6.35
4 Φ9.52 25.4*22 Grooved Fin, Sine Wave Fin 1.6-3.2
5 Φ9.52 25.4*22 Grooved Fin, Plain Fin, Sine Wave Fin 1.4-3.2
6 Φ9.52 25*19 Grooved Fin, Plain Fin, Sine Wave Fin 2.0-3.8
7 Φ9.52 25*21.65 Grooved Fin, V Ripple Fin 1.6-3.2
8 Φ9.52 25*25 Plain Fin 2.0-6.0
9 Φ9.52 25*21.65 Plain Fin 2.0-6.0
10 Φ9.52 25.4*22 Grooved Fin, Plain Fin, Sine Wave Fin 1.6-6.35
11 Φ9.52 31.75*27.5 Grooved Fin, Plain Fin, Sine Wave Fin 1.6-6.35
12 Φ12.7 31.75*27.5 Plain Fin, Sine Wave Fin, V Ripple Fin 1.8-6.0
13 Φ15.88 38*32.9 V Ripple Fin 1.5-4.5
14 Φ16 38*32.9 V Ripple Fin 2.5-6.0
15 Φ16 55*27.5 Plain Fin, Sine Wave Fin 5.0-8.0
Industrial Water Cooled Air Chiller for Cold Storage System

ABOUT COMPANY

Zeniya Refrigeration and Air Condition Equipment Co., Ltd is a manufacturer established in 2007.
Plant area 10000m3
Production value USD 4,000,000
Zeniya own testing lab, various CNC machine, and can provide perfect after-sale service.
Zeniya focus on quality improvement and cost control. That's why we were born as marine air conditioner OEM factory and developping into top supplier of marine air conditioner in China.
Now we expand our business into air conditioning and refrigeration application in various area such as building, agriculture, commerical, industry etc.  

Your confusions will get prompt attention.
 Industrial Water Cooled Air Chiller for Cold Storage System

Industrial Water Cooled Air Chiller for Cold Storage System
Industrial Water Cooled Air Chiller for Cold Storage System

                                            

Hood Flag

We equipped with advance automatic screen printing machine, inkjet screen making machine, autowashing & heatsetting machine which allow us to make the Flag size up to 2*6 meters with 7 colors. Our factory occupy the area of 3000 square meters, employ about 200 works,provide the production daily capacity for 12000 ~15000 square meters. To protect the environment,we also build the water recycling system according to the standard of national environment protection. With the reputation of products quality and creditability since settled, we have made the project of supplying flags for: the 10th national Games of china, the world table-tennis Championships, 2004 Athens Olympic games, 2008 Euro-Championships, 2008 Beijing Olympic Games and Vancouver 2010 White Olympic Games. As a leading manufactory certificated by ISO9001 in china,we are known as the best quality, the reasonable price, and the fastest delivery. Now our products already exported to all around world ,such as:Germany , Sweden , Switzerland, Belgium, Iceland ,Canada, Australia ,USA,UK,UAE,HongKong an Macao. We will always assure of you to provide the best quality and service. Welcome to contact us,for any question, in any time!

car hood flags,hood flags for cars,cover flag,high quality wooden flag,Car Engine hood cover flag

FlagKing Flags Manufacturing Co.,Limited , https://www.cnflagkings.com