[Inventory] Top 5 Common Problems and Solutions for Wireless Sensors
Solution: The performance of the product selected by the customer does not meet the on-site conditions. The transmitter with isolation function must be installed or replaced.
2. Wrong or not displayed on the wireless sensor installation Cause: The wiring of the positive and negative levels of the signal line is wrong. Solution: Disconnect the power supply, exchange the positions of the two signal lines, and use the terminals to compress and re-power on. In particular, the PT100 RTD sensor with three-wire output without a transmitter often causes such problems when installed on site.
3. The value displayed after the use of the wireless liquid level sensor is unchanged. Cause: The water intake solution in the air pipe is returned to the factory for maintenance. The air in the air pipe is drained, and the calibration is performed again.
4, the temperature sensor no signal output reasons: workers installed, because they do not understand the sensor, so the force is too large, resulting in the pull-out of the temperature measuring element pins, so that the signal loop interrupted.
Solution: When installing, just connect the wire to the terminal, without removing the transmitter or magnetic board, use the terminal to compress the signal lead.
5, intelligent control instrument installation does not show the reasons: instrument parameter settings are not correct solution: first confirm the type of signal received by the wireless sensor, corresponding to this type of intelligent control instrument input parameters can be adjusted.
High Quality Zirconia Nozzle:
As for zirconium refractories, zirconium contents can reach 97%, which is in the leading position in the industry and makes outstanding contributions to the world's steel.
Anyang Jinrong Company is a professional manufacturer of refractory materials,mainly produce Zirconia Insert , Zirconia Tundish Nozzle ,Tundish Upper Nozzle,Tundish Lower Nozzle, Tundish Well Block ,Submerged Entry Nozzle,Ladle Nozzle,Ladle Upper Nozzle , Ladle Lower Nozzle, Ladle Slide Gate Plate,Porous Plug.Over the past 28 years, our company have become a leading refractory manufacturer at home and abroad.
Perfect business philosophy and strong production equipment, make the company become stronger.All the staff have established the ANYANG JINRONG brand with the supremacy of integrity,excellent quality and service, made outstanding contributions to the development of iron and steel industry in China and even in the word .
High Quality Zirconia Nozzle,Tundish Nozzle Changer For Sale,Tundish Metering Nozzle,Stopper Rod And Nozzle
ANYANG JINRONG METALLURGICAL MATERIALS CO.,LTD , https://www.ladlenozzle.com