Kp Quick Exhaust (Suction) Valve
Â
Profile
Featured by reasonable design, simple structure, small volume, large discharge capacity and considerable improvement to have made KP more perfect, this pr-oduct is used in the highest point or where there is air in pipeline, to clear away the air inside the pipeline for normal work and qualified water discharge. If this product is not installed, there can be vapor lock in pipe, which can result in unqualified water discharge in pipeline. In case of power cut or pump stop while pipeline is in operation, there can easily cause negative pressure in pipeline, which can result in pipeline vibration or breakage. Here, this exhaust (suction) valve will take in considerable air quickly to prevent pipeline from vibration or breakage, thus to ensure the safety of pipeline.
Technical Parameters:
1. Medium: clean water
2. Temperature: normal
3. Body: gray cast iron HT200
4. Float and plug: stainless steel
5. Sealing material: butadiene acrylonitrile rubber
6. Body strength test pressure: 1.5MPa
7. Sealing test pressure: 0.05-1.1MPa
Table size link
Â
Profile
Featured by reasonable design, simple structure, small volume, large discharge capacity and considerable improvement to have made KP more perfect, this pr-oduct is used in the highest point or where there is air in pipeline, to clear away the air inside the pipeline for normal work and qualified water discharge. If this product is not installed, there can be vapor lock in pipe, which can result in unqualified water discharge in pipeline. In case of power cut or pump stop while pipeline is in operation, there can easily cause negative pressure in pipeline, which can result in pipeline vibration or breakage. Here, this exhaust (suction) valve will take in considerable air quickly to prevent pipeline from vibration or breakage, thus to ensure the safety of pipeline.
Technical Parameters:
1. Medium: clean water
2. Temperature: normal
3. Body: gray cast iron HT200
4. Float and plug: stainless steel
5. Sealing material: butadiene acrylonitrile rubber
6. Body strength test pressure: 1.5MPa
7. Sealing test pressure: 0.05-1.1MPa
Table size link
High Pressure Triplex Plunger Pump
High Pressure Pump unit
Our specialised facilities, equipment and highly knowledgeable staff allow us to design and fabricate purpose built machinery ensuring 100% efficiency and performance.
We have a fleet of ultra high pressure pumps ranging from 106 litres per minute @ 200 Bar to 153 litres per minute @ 130 Bar for condenser / bundle / tank cleaning. In addition to these pumps, we have 38 Hp by 9180 Liter per hour at 1885 PSI liquid transfer pumps. Our High Pressure Water Pump unit and accessories are custom developed to best suit the application for which they are required, with regard to the different water pressures and flow rates necessary for each specific application.
Industrial Water Blasting and Vacuum Professionals
We specialise in High Pressure Tube, Pipe & Tank Cleaning, Hydro Demolition, Concrete Removal and Cutting, Vacuum Work, Waste Removal and Non-Destructive Digging.
We have been servicing the Power, Refinery and Construction industries for over 20 years.
Hydro Blast Plunger Pump,Hydroblast Pump,Ultra Hydroblast Triplex Plunger Pump,Hydraulic Plunger Pump
Zhejiang Botuolini Machinery Co.,Ltd , https://www.chinaplungerpump.com