Multi-Cartridge Filter Housing for Industrial Water

General

Particle contamination in process water accelerates the rate of wear of system components. The particles suspended in the media also have detrimental effects on ends products. In order to protect the operational infrastructure and to guarantee shorter maintenance times, it is essential to have a filtration system to remove solid particles from operating fluids.
The automatic back-flushing filter has been highly useful. Numerous operators of power stations, district heating, sewage treatment plants, and manufacturing plants have relied on this dependable filter for many years.



Structure




Operate principle

The fluid to be filtered flows through the filter elements of the back-flushing filter, passing from the inside to the outside. Contamination particles then collect on the inside of the filter elements.
As the level of contamination increases, the differential pressure between the contaminated and clean sides of the filter increases.


Back-flushing

1.The gear motor rotates the flushing arm under the filter elements and ensures the contamination is discharged.
2.The contamination is flushed away through the open back-flushing valve.
3.The pressure drop between filtrate side and back-flushing line flushes a small amount of the filtrate back through the contaminated filter elements.
4.The contamination particles collected on the inside of the filter elements are loosened and flushed into the backflushing line via the flushing arm.
5.After the "back-flushing time per element" has expired, the back-flushing valve is closed. In this way, all the filter elements are back-flushed, one after the other.
A back-flushing cycle is terminated once all filter elements have been cleaned.


Backwash Cartridge Filters Structure is triggered:

- When the differential pressure trigger point is exceeded,
- By means of an adjustable timer
- By pressing the TEST button.


Advantages Optimum structure and back-flushing design

The special conical shape and configuration of the filter elements allow consistent flow, resulting in a low pressure drop and complete cleaning of the elements.
Very low-maintenance. Its robust design, specially developed for retrofitting, makes installation in both existing and new systems fast and cost-effective.

Pulse-aided back-flushing

On the control types EPT and PT, the flushing arm remains under the filter element for only a few seconds.
 
Variable filter isometry

The inlet and outlet flanges as well as the back-flushing line can be configured in different positions. This means that the filter can be integrated easily into any system layout.
 
Electromechanical design

Simple install. PLC controller and drop pressure test pipes connected already, connect with air source can into use.
 
Parameter settable 

Users can set drop pressure and time on actual usage. 


Performance


Costs

Maintenance  
 

Applications


Power industry
• Conditioning of industrial waterused to cool generators
• Filtration of sealing water to increase the service lifeof the turbine shaft floating ring seals in hydroelectric power stations
 
Steel industry
• Filtration of process water to protect nozzlesand pumps in high pressure descaling
• Water conditioning for coolingblast furnaces and rolling mills
• Emulsion filtration in hot and cold rolling mills
• Filtration of rolling emulsions
 
Paper industry
• Protection of all types of nozzles
• on paper machines
• Treatment of fresh water (e.g. river water)to be used for cooling
 
Automotive industry
• Filtration of coolant lubricants
• Filtration of washing fluids
• Protection of machine tools
 
Marine
• Pre-filtration forballast water conditioning systems
 
Chemical industry
• Cooling water filtration
• Waste water filtration
• Filtration of chemicals
 
Oil and gas industry
• Filtration of injection water
• Filtration of cooling water
• Filtration of service water
• Filtration of flushing water (pipeline flushing)
• Filtration solution for the subsea sector
 
Water / waste water conditioning
• Protective filter before membrane systems
• Conditioning of service water in sewage treatment plants
 
Mining
• Filtration of water for shield spraying
• Filtration of water for coal-cutting machinery
• Treatment of cooling water for mine ventilation


Technical specifications
 

Power supply
Electric or pneumatic:EPT
Electric: EU
 

How to select model



 


Filter degree
 


Loss grid






Installation


Vertical install, foundation bolts fixed. Filters can't be seen as pipeline strength support. Pipeline diameter not less than standard drain butterfly valve.
Supply compressed air: make sure air clean, 2bar≤pressure≤8bar, air connection:G1,4" ISO228


 

Suggest pre-treating equipment before automatic back-flushing filter, aim to avoid impact from particles to filter.

Spare parts










 


General

Particle contamination in process water accelerates the rate of wear of system components. The particles suspended in the media also have detrimental effects on ends products. In order to protect the operational infrastructure and to guarantee shorter maintenance times, it is essential to have a filtration system to remove solid particles from operating fluids.
The automatic back-flushing filter has been highly useful. Numerous operators of power stations, district heating, sewage treatment plants, and manufacturing plants have relied on this dependable filter for many years.



Structure




Operate principle

The fluid to be filtered flows through the filter elements of the back-flushing filter, passing from the inside to the outside. Contamination particles then collect on the inside of the filter elements.
As the level of contamination increases, the differential pressure between the contaminated and clean sides of the filter increases.


Back-flushing

1.The gear motor rotates the flushing arm under the filter elements and ensures the contamination is discharged.
2.The contamination is flushed away through the open back-flushing valve.
3.The pressure drop between filtrate side and back-flushing line flushes a small amount of the filtrate back through the contaminated filter elements.
4.The contamination particles collected on the inside of the filter elements are loosened and flushed into the backflushing line via the flushing arm.
5.After the "back-flushing time per element" has expired, the back-flushing valve is closed. In this way, all the filter elements are back-flushed, one after the other.
A back-flushing cycle is terminated once all filter elements have been cleaned.


Backwash Cartridge Filters Structure is triggered:

- When the differential pressure trigger point is exceeded,
- By means of an adjustable timer
- By pressing the TEST button.


Advantages Optimum structure and back-flushing design

The special conical shape and configuration of the filter elements allow consistent flow, resulting in a low pressure drop and complete cleaning of the elements.
Very low-maintenance. Its robust design, specially developed for retrofitting, makes installation in both existing and new systems fast and cost-effective.

Pulse-aided back-flushing

On the control types EPT and PT, the flushing arm remains under the filter element for only a few seconds.
 
Variable filter isometry

The inlet and outlet flanges as well as the back-flushing line can be configured in different positions. This means that the filter can be integrated easily into any system layout.
 
Electromechanical design

Simple install. PLC controller and drop pressure test pipes connected already, connect with air source can into use.
 
Parameter settable 

Users can set drop pressure and time on actual usage. 


Performance


Costs

Maintenance  
 

Applications


Power industry
• Conditioning of industrial waterused to cool generators
• Filtration of sealing water to increase the service lifeof the turbine shaft floating ring seals in hydroelectric power stations
 
Steel industry
• Filtration of process water to protect nozzlesand pumps in high pressure descaling
• Water conditioning for coolingblast furnaces and rolling mills
• Emulsion filtration in hot and cold rolling mills
• Filtration of rolling emulsions
 
Paper industry
• Protection of all types of nozzles
• on paper machines
• Treatment of fresh water (e.g. river water)to be used for cooling
 
Automotive industry
• Filtration of coolant lubricants
• Filtration of washing fluids
• Protection of machine tools
 
Marine
• Pre-filtration forballast water conditioning systems
 
Chemical industry
• Cooling water filtration
• Waste water filtration
• Filtration of chemicals
 
Oil and gas industry
• Filtration of injection water
• Filtration of cooling water
• Filtration of service water
• Filtration of flushing water (pipeline flushing)
• Filtration solution for the subsea sector
 
Water / waste water conditioning
• Protective filter before membrane systems
• Conditioning of service water in sewage treatment plants
 
Mining
• Filtration of water for shield spraying
• Filtration of water for coal-cutting machinery
• Treatment of cooling water for mine ventilation


Technical specifications
 

Power supply
Electric or pneumatic:EPT
Electric: EU
 

How to select model



 


Filter degree
 


Loss grid






Installation


Vertical install, foundation bolts fixed. Filters can't be seen as pipeline strength support. Pipeline diameter not less than standard drain butterfly valve.
Supply compressed air: make sure air clean, 2bar≤pressure≤8bar, air connection:G1,4" ISO228


 

Suggest pre-treating equipment before automatic back-flushing filter, aim to avoid impact from particles to filter.

Spare parts










 

L10 M11 ISM QSM Engine Parts

Ism M11 Diesel Engine Turbocharger Kit,Turbocharger Kit 3800856,3800856 Turbocharger Kit

Xiangren Industry & Trade Co., Ltd. , http://www.hbfuelsystem.com