Natural Gas or Biogas Generator with Cummins Engine Authorization
Product Description for CE approved Natural Gas Generator
1. +20 years professional manufacturer.
2. Wide power range: 10kw-5000kw gas generator, single or parallel running.
3. Multi-option of engine, alternator, control system and cooling system, PLCÂ control panel.
4. Long continuous running hours, 8000 hours per year.
5. CE & ISO approved
6. OEM provided
7. Holding many patents
8. Perfect service system(Sales, Installation, Debugging and after-sale service)
9. Full Range: our products mainly include natural gas generator, biogas generator, biomass generator, coal gas generator, syngas generator, coal-bed gas generator, coke oven gas generator, diesel generator etc.Â
Â
Product Features
Main spare parts for Gas Generator:
1.Control system: America Woodward control system
2. Controller: ComAp, Deepsea, Woodward
3.Ignition system: American ALTRONIC, including:magneto, high-tension coil
4. Starting system: DC 24V electric motor.Â
5. Mixer:Â IMPCO
6. Spark plug:Â STITT
Â
Gas Generator worksite requirements
The worksite needs to meet following basic requirements:
 a) Ambient temperature between -40ºC~40ºC;
 b) Relative humidity less than 95%(35ºC);
 c) Site elevation not higher than 3500m;
 d) For outdoor installation, simple rain shelter is required.
Â
Requirements for Natural Gas
Within 1m from pressure regulation valve of gas intake
1. Gas Temperature≤40ºC
2. Pressure 80~200kpa, Changing Rate≤1kpa/min
3. H2S≤20mg/Nm³
4. Content of CH4≥70%
5. Impurity Particle Size≤5μm, impurity content≤30mg/Nm³
6. Moisture Content≤40g/Nm³
Some Tips
Higher content of sulfur and ammonia is not only seriously corrodes the spark plug, but also increase the lubricant's acid value, and then gen-set internal parts will be corroded partly. That will shorten the gen-set's life time. So the gas scrubbing is very important!
Technical Parameters
Parameters for 10-600kw Natural Gas Generator Set
Model Number | LHNG |
Brand Name | LVHUAN |
Prime Power | 8-480KW |
Rated Power | 10-600KW |
Gas Mixed Mode | Outside |
Rated Speed | 1500rpm/1000rpm |
Rated Frequency | 50/60Hz |
Rated Voltage | 400V/230VÂ |
Rated Current | 18-1080A |
Phase | AC 3-Phase, 4 Wire |
Gas Pressure | 80-200kpa |
Intake Mode | Natural Intake/Supercharging and Inter Cooler |
Voltage Stability | ≤±2% |
Voltage Transient | ≤±10% |
Voltage Stable Time | ≤1s |
Heat Consumption | ≤9.8mj/kw.h |
Lubricant Consumption | 1-1.3g/kw.h |
Noise | 75-105dB(A) |
Cylinder Number | 4/6/12 |
Cylinder Bore | 100/105/135/138/190mm |
Starting System | DC 24V Electric Motor |
Sparking Mode | Spark Plug |
Cooling Method | Circlulating Water Cooling |
Lubricant Method | Passive and Flying Lubricant |
Isolation Class | H |
Protection | IP23 |
Alternator | Siemens, Standford, Leroy Somer, Marathon, etc. |
Power Factor | 0.8 Lagging |
Exciting Method | Brushless |
Colour | You Decide |
Certificates | ISO 9001:2008, CE |
Warranty | 1 Year |
Overheal Time | More Than 30000h |
Type | Open |
Control System | Automatic Alarm System |
Size | 1450*700*1100mm~6000*1970*2735mm |
Weight | 600kg~12000kg |
Applied Range for Natural Gas Generator
1. Oil Field
2. Industrial Zone
3. Petroleum Chemical
4. Using Natural Gas Generator Set as Standby Power Source
5. Supplying Power for Auxiliary Engine which work in Oil Well.
Â
CE approved Biogas Generator Set
Requirements for Biogas
Within 1m from pressure regulation valve of gas intake
1. Gas Temperature≤40ºC
2. Pressure 3~20kpa, Changing Rate≤1kpa/min
3. H2S≤200mg/Nm³
4. NH3≤20mg/Nm³
5. Content of CH4≥40%, Changing Rate≤2%/min
6. Impurity Particle Size≤5μm, impurity content≤30mg/Nm³
7. Moisture Content≤40g/Nm³
Â
Technical Parameters for 10-600kw power Biogas Generator Set
Model Number | LHBG |
Brand Name | LVHUAN |
Prime Power | 8-480KW |
Rated Power | 10-600KW |
Gas Mixed Mode | Outside |
Rated Speed | 1800rpm/1500rpm/1200rpm/1000rpm |
Rated Frequency | 50/60Hz |
Rated Voltage | 400V/230VÂ |
Rated Current | 18-1080A |
Phase | AC 3-Phase, 4 Wire |
Gas Pressure | 3-20kpa |
Intake Mode | Natural Intake/Supercharging and Inter Cooler |
Voltage Stability | ≤±2% |
VoltageTransient | ≤±10% |
Voltage Stable Time | ≤1s |
Heat Consumption | ≤9.8mj/kw.h |
Lubricant Consumption | 1-1.3g/kw.h |
Noise | 75-105dB(A) |
Cylinder Number | 4/6/12 |
Cylinder Bore | 100/105/135/138/190mm |
Starting System | DC 24V electric motor |
Sparking Mode | Spark Plug |
Cooling Method | Circlulating Water Cooling |
Lubricant Method | Passive and Flying Lubricant |
Isolation Class | H |
Protection | IP23 |
Alternator | Siemens, Standford, Leroy Somer, Marathon, etc. |
Power Factor | 0.8 Lagging |
Exciting Method | Brushless |
Colour | Your Choice |
Certificates | ISO 9001:2008, CE |
Warranty | 1 Year |
Overheal Time | More Than 30000h |
Type | Open |
Control System | Automatic Alarm System |
Size | 1450*700*1100mm~6000*1970*2735mm |
Weight | 600kg~12000kg |
Applied Range for Biogas Generator
1.Animal Husbandry & Livestock, Breeding Dejection
2.Lanfill Gas, Rubblish Landfill
3.Industrial organism sewage
4.All kinds of project which can produce Biogas and the content of CH4≥40%
Service committee for Gas Generator:
1. Pre-sale service:Â
1) We will send our engineer to prospect the site of power station free of charge.
2) According to the situation of site, we will provide design drawings, such as power plant floor drawing, cooling system drawing, genset foundation, control room design, etc.
Â
2. Sale service:
1) Operator training would be conducted by Lvhuan technicians during the process of commissioning or Factory training course in China,
2) Installation and commission of the genset would be instructed assisted by Lvhuan technicians at site.
Â
3. After-sale service:
1) We have strong after-sale team, we will response within 24 hours and provide technical supports by phone or site guiding, help our clients to gain the biggeset profit.
2) For the quality problem, we will service for you free of charge during the guarantee period.
3) We  provide one year guarantee period and lifetime service.
Â
Plentiful spare part supply for Gas Generator:
1. We have spart parts department, plentiful spare part supply for all genset model will guarantee genset lifetime running.
2.All parts were from original factories or professional factories,complete in specification, keep good quality.
Â
FAQs Gas Generator:
1. Are you factory? and where is your factory?
Yes, we are. Our factory is located in Zhangqiu Longshan subdistrict, Jinan city, Shandong province, Welcome to visit our factory.
2. How to choose the right model?
To choose a right model, we need to know required continuous output power, local voltage and frequency and fuel (such as diesel, natural gas, biogas, biomass gas, coal gas, syngas, etc.). For biomass power plant and coal gas power plant, some clients may doesn't have gasification system, then we need information about raw material.
Â
3. What's the genset warranty?
The warranty is one year. We will offer free service and spare parts during warranty period. Lifetime service will be provided by our trustworthy after-sale team.
Â
4. How to do the maintenance?
Operator training will be provided by our technician. After training, local operator can do the basic maintenance by themselves according to our maintenance manual.
Â
5. Will be operation training offered?
Yes, operator training would be conducted by our technicians during the process of commissioning or factory training course in China.
Â
6. What's about the installation and commissioning?
Installation and commissioning of the genset would be instructed assisted by our technicians on site.
7. What is your regular delivery time?
20 days after order releasing.
Natural Gas or Biogas Generator with Cummins Engine Authorization
Production Rooms for Gas Generator
Showcases for Gas Generator
Lvhuan Quality; Clients Trust for Our Gas Generator
Lvhuan Certifications and Patents of Gas Generator
Lvhuan Professional Packing & Loading Team for Gas Generator
Natural Gas or Biogas Generator with Cummins Engine Authorization
PLEASE FEEL FREE TO CONTACT Sarah FOR ANY QUESTION
 Natural Gas or Biogas Generator with Cummins Engine Authorization
Product Description for CE approved Natural Gas Generator
1. +20 years professional manufacturer.
2. Wide power range: 10kw-5000kw gas generator, single or parallel running.
3. Multi-option of engine, alternator, control system and cooling system, PLCÂ control panel.
4. Long continuous running hours, 8000 hours per year.
5. CE & ISO approved
6. OEM provided
7. Holding many patents
8. Perfect service system(Sales, Installation, Debugging and after-sale service)
9. Full Range: our products mainly include natural gas generator, biogas generator, biomass generator, coal gas generator, syngas generator, coal-bed gas generator, coke oven gas generator, diesel generator etc.Â
Â
Product Features
Main spare parts for Gas Generator:
1.Control system: America Woodward control system
2. Controller: ComAp, Deepsea, Woodward
3.Ignition system: American ALTRONIC, including:magneto, high-tension coil
4. Starting system: DC 24V electric motor.Â
5. Mixer:Â IMPCO
6. Spark plug:Â STITT
Â
Gas Generator worksite requirements
The worksite needs to meet following basic requirements:
 a) Ambient temperature between -40ºC~40ºC;
 b) Relative humidity less than 95%(35ºC);
 c) Site elevation not higher than 3500m;
 d) For outdoor installation, simple rain shelter is required.
Â
Requirements for Natural Gas
Within 1m from pressure regulation valve of gas intake
1. Gas Temperature≤40ºC
2. Pressure 80~200kpa, Changing Rate≤1kpa/min
3. H2S≤20mg/Nm³
4. Content of CH4≥70%
5. Impurity Particle Size≤5μm, impurity content≤30mg/Nm³
6. Moisture Content≤40g/Nm³
Some Tips
Higher content of sulfur and ammonia is not only seriously corrodes the spark plug, but also increase the lubricant's acid value, and then gen-set internal parts will be corroded partly. That will shorten the gen-set's life time. So the gas scrubbing is very important!
Technical Parameters
Parameters for 10-600kw Natural Gas Generator Set
Model Number | LHNG |
Brand Name | LVHUAN |
Prime Power | 8-480KW |
Rated Power | 10-600KW |
Gas Mixed Mode | Outside |
Rated Speed | 1500rpm/1000rpm |
Rated Frequency | 50/60Hz |
Rated Voltage | 400V/230VÂ |
Rated Current | 18-1080A |
Phase | AC 3-Phase, 4 Wire |
Gas Pressure | 80-200kpa |
Intake Mode | Natural Intake/Supercharging and Inter Cooler |
Voltage Stability | ≤±2% |
Voltage Transient | ≤±10% |
Voltage Stable Time | ≤1s |
Heat Consumption | ≤9.8mj/kw.h |
Lubricant Consumption | 1-1.3g/kw.h |
Noise | 75-105dB(A) |
Cylinder Number | 4/6/12 |
Cylinder Bore | 100/105/135/138/190mm |
Starting System | DC 24V Electric Motor |
Sparking Mode | Spark Plug |
Cooling Method | Circlulating Water Cooling |
Lubricant Method | Passive and Flying Lubricant |
Isolation Class | H |
Protection | IP23 |
Alternator | Siemens, Standford, Leroy Somer, Marathon, etc. |
Power Factor | 0.8 Lagging |
Exciting Method | Brushless |
Colour | You Decide |
Certificates | ISO 9001:2008, CE |
Warranty | 1 Year |
Overheal Time | More Than 30000h |
Type | Open |
Control System | Automatic Alarm System |
Size | 1450*700*1100mm~6000*1970*2735mm |
Weight | 600kg~12000kg |
Applied Range for Natural Gas Generator
1. Oil Field
2. Industrial Zone
3. Petroleum Chemical
4. Using Natural Gas Generator Set as Standby Power Source
5. Supplying Power for Auxiliary Engine which work in Oil Well.
Â
CE approved Biogas Generator Set
Requirements for Biogas
Within 1m from pressure regulation valve of gas intake
1. Gas Temperature≤40ºC
2. Pressure 3~20kpa, Changing Rate≤1kpa/min
3. H2S≤200mg/Nm³
4. NH3≤20mg/Nm³
5. Content of CH4≥40%, Changing Rate≤2%/min
6. Impurity Particle Size≤5μm, impurity content≤30mg/Nm³
7. Moi
WHAT ARE TRICONE DRILL BITS USED FOR?
Tricone bits, first created during the Great Depression, represented a significant leap forward in drilling technology. Tricone drill bits are the go-to solution for almost any well digging, from everything to simple water wells to industrial scale oil extraction. Tricone bits come in several different varieties, and can deal with a wide range of different rock formations. Most tricone bits are either Mill Tooth bits, or TCI bits (TCI stands for Tugnsten Carbide Insert), and there is an ideal tricone bit for soft, medium, or hard rock formations. It is important to know the type of formation you are drilling in when selecting a drill bit.
TRICONE DRILL BITS FOR SOFT ROCK FORMATIONS
Soft rock formations consist mainly of sand, clay, limestone or shale and are ideal for drilling with Mill Tooth Tricone bits. When working with soft formations you can use either sealed bearing or open bearing mill tooth tricone bits, depending on the scope and duration of your project. Sealed bearing tricone bits are longer lasting, but generally more expensive due to the precision work required to protect the bearings. Open bearing bits, on the other hand, are not as well protected and will wear out more quickly, however they are cheaper to manufacture. Tricone bits designed for soft rock generally have longer protruding teeth, [A" shaped teeth, or chisel shaped buttons. In all cases the teeth will be more widely spaced for tricone bits that are designed with soft formations in mind.
TRICONE BITS FOR MEDIUM ROCK FORMATIONS
If you`re drilling in calcites, dolomites, hard limestones, and some hard shale you`ll need a tricone bit designed for medium rock formations. You may want a TCI Tricone bit. To better understand why tungsten carbide is ideal it`s useful to know about its properties. First discovered in 1927, Tungsten carbide is an exceptionally strong and hard material, this allows it to withstand higher speeds for more rapid drilling. Additionally tricone TCI bits are much more capable at absorbing the significant amounts of heat generated without damaging the tricone drill bit. Medium formation bits have teeth that are far closer together than what you see with soft formation drill bits. Additionally the teeth are less protruding, although they may still come in a similar range of shapes.
TRICONE BITS FOR HARD ROCK FORMATIONS
Hard rock formations are hard and abrasive formations usually made up of hard shale, calcites, mudstones, chert, pyrite, granite, quartzite, and cherty lime stones. The difficulties of drilling in this material make a TCI tricone bit all but mandatory. The exceptional hardness and strength of TCI [buttons" for the drill bits allow them to endure very difficult drilling conditions. As with all tricone bits there is an option between sealed bearing and open bearing. Sealed bearing bits are considerably more protected from wear and tear and therefore suitable for much more use before being replaced. Gauge protection can also significantly increase the lifespan of a tricone drill bit. Bits designed for hard formations continue the trend of less protruding teeth placed closer together. The teeth will be very short and placed very closely together. This results in a much slower drilling speed than you would get with medium or soft formation drill bits, however if you are drilling through hard rock strata you don`t have much choice.
TRICONE BITS ARE IDEAL FOR SOFT, MEDIUM, AND HARD FORMATIONS.
Hopefully the above information has given you an idea of which tricone bit is ideal for the various rock formations you may have to contend with. For particularly advanced or ambitious projects you will want to carefully consider the type of tooth, additional kinds of seals, the importance of gauge protection, and estimated duration of the project in addition to the rock formation.
Drilling bit for sale,drilling bit for Africa Water Well Drilling Rig With Good Quality.
Drilling Bits And Tri-Cone Bit,Rock Bit For Hard Rock Drilling,Api Drilling Bit For Rock Gas,Geothermy Water Well Drilling Bit
Henan YK Prospecting Machinery Co., Ltd , https://www.yyphotovoltaicpilingrig.com