Preparation method of nano titanium dioxide---alcohol method
This method is introduced in Chinese patent CN1097400A. It is to add TiCl 4 to liquid paraffin or a mixed solvent of 120# gasoline and pyridine, add ethanol, and simultaneously pass ammonia, the reaction pressure is about 0.2MPa, the reaction temperature is 45°C, and the solution is When the pH reaches 8-10, the reaction is terminated. After filtration, the additive is added for hydrolysis. After separating the organic phase, it is vacuum dried or freeze-dried, then calcined and pulverized to obtain a finished nano-TiO 2 . The nano-process flow for alcoholysis production is shown in the figure below.
To obtain perfect joins, inside of the solder ring copper fitting and the outside of the copper pipe are cleaned using coarse steel wool, flux paste is applied, the pipe is then inserted into the fitting and heat applied from a portable propane torch until a ring of solder shows at the edges of the fitting. Sizes we have available are from 8mm to 54mm For EN1254-1 and 1/2" to 2" for ASME B16.22 ,solder ring Copper Fittings,presolder copper fittings,yorkshire copper fittings,pegler copper fittings,connex copper fittings
solder ring copper fittings,presolder copper fittings,yorkshire copper fittings,pegler copper fittings,connex copper fittings
Taizhou Runde Company , https://www.zjbronzefittings.com