V Shape Sub-HEPA Air Filters

V shape sub-hepa air filters with pp media

Description:

FV Combined air filteration filter dust collector
Features: High efficiency, low resistance and large air flow.
Filtering Efficiency Grade: H13, H14(EN  1822);
Suitable for the terminal filtration of the air conditioning system and the air cleaning facility needing large air flow;
Large filtering area to make sure the low resistance on the large airflow side;
Either standard galvanized steel frame or stainless steel frame;
Sealant: Polyurethane;
Sealed material: Molding plastic polyurethane or neoprene;
Max.operating temperature: 80 degree centigrade;
One-by-one test;



FloMax ® HJV Filters are made with a series of mini-pleat bead separator media packs assembled in a
V-Bank configuration. 24" x 24" x 11-1/2" size filter ontain 300 square feet of media .FloMax filter is designed to operate at 500 FPM with initial resistance of 1.2" W.G. ( 99.99% Efficiency). This allow the HEPA filter to be installed in line with other filters in the air handling system without the need for costly transitions.

Due to their 4250 m3/h capacity, FloMax filter is ideal for new installations since fewer filters are required to handle the same volume of air compared to HEPA Filters of the same size with a lower capacity.As a result, less installation space is required and installation time is significantly reduced.

Advantages:

• High air flow rates, up to 2500 CFM ( 4250 m3/hr)
• Maintenance-free and easy to install.
• High dust holding capacity
• Efficiency ranges from 95% up to 99.995%@0.3 microns
• High filter surface area offers low pressure drop for energy
savings and longer life.
• Each filter includes a label noting tested efficiency,pressure
drop,rated airflow;
• Constructed with ten individual mini pleat packs secured in a
specially -designed sheet aluminum V-bank frame.
• Available in a range of cleaning efficiencies 99.99% and
99.995%@ DOP

Parameters & Material:

- Frame: Zinc Coated Steel
- Galvanized Steel
- Stainless steel
- Media: Wet laid microfine glass paper
- Separator: Hot-melt beads
- Sealant: Polyurethane
- Gasket: Continuous foamed seal /Neoprene
- Faceguard: No faceguard
- Gasket Location: Upstream / Downstream / Both sides.
- Frame Type: Box or Single Flange
-Max.Constant Temperature: 80ºC (170ºF)
- Recommended Final Resistance: 600Pa ( 2.4" W.G)
- Flammability: UL Classified
- Relative Humidity: 100%

Testing

Each HEPA filter is tested in accordance with Europeanstandard BS EN 1822-1,4&5 (Testing filter elements HEPA efficiency and scan method).


Applications:

The ZW- FV/HV are used in high efficiency final filtration in air conditioning systems, where very high airflow required

Product Flow:









Other products:




SHIPPIN AND DELIVERY:

Packing: All the goods will be packed in carton box, plywood sheild, wooden box or wodden cases, we can pack the good in customers' requirements.

Delivery time: within 4-15 days. We can delivery the good within 7 workdays in general.



Workshop show:





Our serivice:

we are HVAC air filter and clean room filter equipment manufacture since 2002,right now we are working with many distributors, such as Premium Filters and Inversions Abaco Ltda.
 
Our products follow up the standard of ISO9001, CE, and SGS, quality equal with AAF, Camfil and other US brand, price is very much lower than them.

If you want to know more details about our products, pls visit our web:Http:www.zhuowei-filter.com.


FAQ:

Frequently Asked Questions
 

1. When can I get the quotation?

We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.

 

2. How can I get a sample to check your quality?

After price confirmation, you can require for samples to check our quality.

If you need the samples, we will charge for the sample cost .But the sample cost can be refundable after order confirmation when your quantity of the order is more about the MOQ.

 

3. Can you do the design for us?

Yes. We have a professional team having rich experience in air compressor parts design and manufacturing. Just tell us your ideas and we will help to carry out your ideas into perfect product. It does not matter if you have the part No. or not. Send us drawing pictures or specifications, we'll customize it for you.

 

4. How long can I expect to get the sample?

After you pay the sample charge and send us confirmed files, the samples will be ready for delivery in 3-7 working days.

 

5. What is your terms of delivery?

We accept EXW, FOB, CIF, etc. You can choose the one which is the most convenient or cost effective for you.
 

Contact us:





Pls note:

Working day: from Monday to staurday Morning (8:00 am-12:00am  13:30 pm to 17:30 pm)
  V shape sub-hepa air filters with pp media

Description:

FV Combined air filteration filter dust collector
Features: High efficiency, low resistance and large air flow.
Filtering Efficiency Grade: H13, H14(EN  1822);
Suitable for the terminal filtration of the air conditioning system and the air cleaning facility needing large air flow;
Large filtering area to make sure the low resistance on the large airflow side;
Either standard galvanized steel frame or stainless steel frame;
Sealant: Polyurethane;
Sealed material: Molding plastic polyurethane or neoprene;
Max.operating temperature: 80 degree centigrade;
One-by-one test;



FloMax ® HJV Filters are made with a series of mini-pleat bead separator media packs assembled in a
V-Bank configuration. 24" x 24" x 11-1/2" size filter ontain 300 square feet of media .FloMax filter is designed to operate at 500 FPM with initial resistance of 1.2" W.G. ( 99.99% Efficiency). This allow the HEPA filter to be installed in line with other filters in the air handling system without the need for costly transitions.

Due to their 4250 m3/h capacity, FloMax filter is ideal for new installations since fewer filters are required to handle the same volume of air compared to HEPA Filters of the same size with a lower capacity.As a result, less installation space is required and installation time is significantly reduced.

Advantages:

• High air flow rates, up to 2500 CFM ( 4250 m3/hr)
• Maintenance-free and easy to install.
• High dust holding capacity
• Efficiency ranges from 95% up to 99.995%@0.3 microns
• High filter surface area offers low pressure drop for energy
savings and longer life.
• Each filter includes a label noting tested efficiency,pressure
drop,rated airflow;
• Constructed with ten individual mini pleat packs secured in a
specially -designed sheet aluminum V-bank frame.
• Available in a range of cleaning efficiencies 99.99% and
99.995%@ DOP

Parameters & Material:

- Frame: Zinc Coated Steel
- Galvanized Steel
- Stainless steel
- Media: Wet laid microfine glass paper
- Separator: Hot-melt beads
- Sealant: Polyurethane
- Gasket: Continuous foamed seal /Neoprene
- Faceguard: No faceguard
- Gasket Location: Upstream / Downstream / Both sides.
- Frame Type: Box or Single Flange
-Max.Constant Temperature: 80ºC (170ºF)
- Recommended Final Resistance: 600Pa ( 2.4" W.G)
- Flammability: UL Classified
- Relative Humidity: 100%

Testing

Each HEPA filter is tested in accordance with Europeanstandard BS EN 1822-1,4&5 (Testing filter elements HEPA efficiency and scan method).


Applications:

The ZW- FV/HV are used in high efficiency final filtration in air conditioning systems, where very high airflow required

Product Flow:









Other products:




SHIPPIN AND DELIVERY:

Packing: All the goods will be packed in carton box, plywood sheild, wooden box or wodden cases, we can pack the good in customers' requirements.

Delivery time: within 4-15 days. We can delivery the good within 7 workdays in general.



Workshop show:





Our serivice:

we are HVAC air filter and clean room filter equipment manufacture since 2002,right now we are working with many distributors, such as Premium Filters and Inversions Abaco Ltda.
 
Our products follow up the standard of ISO9001, CE, and SGS, quality equal with AAF, Camfil and other US brand, price is very much lower than them.

If you want to know more details about our products, pls visit our web:Http:www.zhuowei-filter.com.


FAQ:

Frequently Asked Questions
 

1. When can I get the quotation?

We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.

 

2. How can I get a sample to check your quality?

After price confirmation, you can require for samples to check our quality.

If you need the samples, we will charge for the sample cost .But the sample cost can be refundable after order confirmation when your quantity of the order is more about the MOQ.

 

3. Can you do the design for us?

Yes. We have a professional team having rich experience in air compressor parts design and manufacturing. Just tell us your ideas and we will help to carry out your ideas into perfect product. It does not matter if you have the part No. or not. Send us drawing pictures or specifications, we'll customize it for you.

 

4. How long can I expect to get the sample?

After you pay the sample charge and send us confirmed files, the samples will be ready for delivery in 3-7 working days.

 

5. What is your terms of delivery?

We accept EXW, FOB, CIF, etc. You can choose the one which is the most convenient or cost effective for you.
 

Contact us:





Pls note:

Working day: from Monday to staurday Morning (8:00 am-12:00am  13:30 pm to 17:30 pm)
 

Rotary Pot Conveying Equipment using Rotary Equipment to transport hot pot ingredients, and dining table inlaid with induction cooker, a very novel and unique hot pot dining, more stylish, hygienic, beautiful, fresh preservation of ingredients better, marble countertops, high-end atmosphere, with To consumers a sense of value for money.
Rotary pot conveying equipment, 304 stainless steel and imported electrical components, engineers and assembly staff carefully designed and produced, with safety, smooth transmission, no noise, wear-resistant, hygienic, easy to clean and so on, the appearance of both stylish and generous and no lack of expression Human characteristics of this place.

Rotary Pot Conveying Equipment

Rotary Pot Conveying Equipment,Rotary Hot Pot Equipment,Stainless Steel Rotary Pot Conveying Equipment,Rotary Hot Pot Belt

Guangzhou QianYu Food Machinery Co., Ltd. , https://www.qianyusushimachinery.com