1000mm/950mm Single Head Wide Belt Sanding Machine, Wide Belt Sander
Model NO.: RWS1000R-RP
Color: Customized
Working Width: 630/1000m1300mm
Sanding Belt: 80mesh
Trademark: SAMACH
Transport Package: Sets
Origin: China
HS Code: 84659300
Single Head Wide Belt Sanding MachineStandard Specification:
Â
1.Aluminum sanding pad, Large contact area ,achieve good polishing effect   Special swallow tailed structure, increase its stability
2. Pulley one-piece roller, enhance the overall balanceÂ
3. Customized heavy tense cylinder, bold piston rod with better stability Â
4.Cast Iron Calendering roller seat, pull-down spring extends operating life.
Â
5. Belt swing is adjustable by operating the knob, adjusting the belt swing becomes convenient.
Â
6. The height of worktable can be adjusted according to the thickness of the workpiece.
 Lock plate: The machine automatically stop working to protect machines and staff from injury once the material is thicker than setted.Â
Â
7.Digital Control Panel
 Height of processing is adjustable , easy to operate, convenient to learn and train
 Â
8.Photoelectric switch blower
 Automatically clean the surface dust of the photoelectric switch to avoid crashing caused by dust accumulation.
 Â
9.Granite worktable, no deformation, good stability
Â
 10.Independent bearing hanging plates to fix the height of roller
Equipped with locating rod ,easy to adjust the height of roller.
 Â
Optional :
Â
1.Sand belt swing blower device,automatically clean the surface dust of the sanding belt in operation
 Â
2.Automatic elevation adjustment of sanding pad.(PLC control)
Â
3.Air bag sanding pad, constant air pressure inside. Used for sanding wooden veneered board.
Â
4. Eccentric shaft ,lifting adjusted by pneumatic turn-over.
Can be used to make fine adjustments to the lifting roll to adjust the amount of sanding.
The roller automatically rise to prevent the panels and machines from damaging for emergency stop.
  Â
5.Emergency Stop SwitchÂ
 Â
6.External cleaning brush roll
 Â
7.power break protection device
Â
8.Central power switch
Â
9.Vacuum to the conveyer belt( 5.5kw high pressure positive blower)
 Â
10.Adjust the frequency converting speed of conveyer belt.
Â
 Parameter :2. Pulley one-piece roller, enhance the overall balanceÂ
3. Customized heavy tense cylinder, bold piston rod with better stability Â
4.Cast Iron Calendering roller seat, pull-down spring extends operating life.
Â
5. Belt swing is adjustable by operating the knob, adjusting the belt swing becomes convenient.
Â
6. The height of worktable can be adjusted according to the thickness of the workpiece.
 Lock plate: The machine automatically stop working to protect machines and staff from injury once the material is thicker than setted.Â
Â
7.Digital Control Panel
 Height of processing is adjustable , easy to operate, convenient to learn and train
 Â
8.Photoelectric switch blower
 Automatically clean the surface dust of the photoelectric switch to avoid crashing caused by dust accumulation.
 Â
9.Granite worktable, no deformation, good stability
Â
 10.Independent bearing hanging plates to fix the height of roller
Equipped with locating rod ,easy to adjust the height of roller.
 Â
Optional :
Â
1.Sand belt swing blower device,automatically clean the surface dust of the sanding belt in operation
 Â
2.Automatic elevation adjustment of sanding pad.(PLC control)
Â
3.Air bag sanding pad, constant air pressure inside. Used for sanding wooden veneered board.
Â
4. Eccentric shaft ,lifting adjusted by pneumatic turn-over.
Can be used to make fine adjustments to the lifting roll to adjust the amount of sanding.
The roller automatically rise to prevent the panels and machines from damaging for emergency stop.
  Â
5.Emergency Stop SwitchÂ
 Â
6.External cleaning brush roll
 Â
7.power break protection device
Â
8.Central power switch
Â
9.Vacuum to the conveyer belt( 5.5kw high pressure positive blower)
 Â
10.Adjust the frequency converting speed of conveyer belt.
Â
Â
TYPE | RWS630R(RP) | RWS1000Â R(RP) | RWS1300Â R(RP) |
Working  Width | 30-630mm | 30-1000mm | 30-1300mm |
Working Thickness | 2-100mm | 2-100mm | 2-100mm |
Feeding  Speed | 5-25m/min | 5-25m/min | 5-25m/min |
Size of Abrasive Belt | 650*1900mm | 1020*2000mm | 1320*2200mm |
Sanding shelf |
25sh ø190mm rubber  ,4kw |
25sh ø190mm rubber,7.5kw |
25sh ø190mm rubber ,11kw |
Sanding Belt (cloth) | 80 Mesh | 80 Mesh | 80 Mesh |
Total Motor Power | 9.37kw | 12.87kw | 25.55kw |
Working Air Pressure | >=0.55Mpa | >=0.55Mpa | >=0.55Mpa |
Speed of Sucked Air | >=25m/s | >=25m/s | >=25m/s |
Overall Dimensions | 18620*1265*2000mm | 1620*1675*2040mm | 1940*2020*2200mm |
 Reasons to choose Samac:
1: good resources with No.1 quality in China
2: quick delivery
3: excellent after-sale services
4: 24 hours technical support through email or calls.
5: freind partner relationship.
Get the maximum return on your investment with Samach's affordable, flexible and user-friendly machines, designed to help you succeed by delivering maximum performance!Â
Gear Clock Series, fully designed and developed by Mid-Clock R&D team, CE and RoHS Marking approved.
Gear Clock is the combination of Mechanism and Art. Gears are always moving as the time goes. Every single gear is linked and driven precisely. The unified operation of all the gears shows the beauty of Mechanism.
From the time Gear Clock was develop, it has been the best-selling product line till today. And we have extended the series like Classic Desk Gear, Classic Wall Gear, Huge Wall Gear, Building Gear, Funny Stuff, Wooden Gear.
We can provide customized service with ordering a MOQ at 300PCS, like printing the LOGO. You can also develop your idea in Gear Clock Series.
Gear Clock Factory in China, China Gear Clock Factory, Clock with Gears, Gear Clock, Fashionable Gear Clock, Classical Gear Clock
Guangzhou Huan Yu Clocking Technologies Co., Ltd. , https://www.mk-times.com