Batch Type Explosion Proof Chamber Dryer

Model NO.: FZG
Type: Vacuum Disc
Operation Pressure: Vacuum
Material: Stainless Steel
Condition: New
Structure: Chamber
Design and Fabrication Stds.: GB, En
Certification: Ce, ISO, GMP
Trademark: ChangAo
Transport Package: Wooden Box
Specification: FCL
Origin: Changzhou, China
HS Code: 8419399090
YZG/FZG Series Vacuum Dryer:
It is well known that vacuum drying is to put raw material to the state of vacuum for heating and drying. Use vacuum pump to suck air and humidity out, drying speed will be faster.

Note: If use condenser, the solvent in raw material can be recovered. If use SK series water ring vacuum pump or ZSW series hydraulic inject vacuum pump sets, condenser can not be used and the investment could be saved.

It is suitable for drying heat sensitive raw materials that will decompose and polymerize and metamorphose at high temperature. It is widely used in pharmaceutical, chemical, foodstuff and electronic industries.

Batch Type Explosion Proof Chamber Dryer
Features:
1. Under the condition of vacuum, the boiling point of raw material will decrease and could heat material more uniform.
2. Heating resource for choice: low pressure steam, heat conducting oil, electricity and hot water.
3. The heat loss of evaporator is less.
4. Before drying, the treatment of disinfection could be carried out. During the period of drying, there is no impurity material mixing. It is conformity with the requirement of GMP.
5. It belongs to static drier. So the shape of raw material to be dried will not be destroyed.

Technical Specification:
    Spec.
Name
YZG-600 YZG-1000 YZG-1400 FZG-15
Inner size of drying chamber (mm) φ600×976 φ1000×1527 φ1400×2054 φ1500×1400×1220
Outer size of drying chamber (mm) 1135×810×1020 1693×1190×1500 2386×1675×1920 1513×1924×2060
Quantity of baking frame layer 4 6 8 8
Distance between layers (mm) 81 102 102 122
Size of baking tray (mm) 310×600×45 250×410×45 400×600×45 480×630×45
Quantity of baking tray 4 24 32 32
Used pressure in pipe of baking frame (MPa) ≤0.784
(8kg/cm2)
≤0.784 ≤0.784 ≤0.784
Used temperature of baking frame (ºC) -35~+150 -35~+150 -35~+150 -35~+150
Vacuum in chamber in idle (Pa) 1333 (10 torr) 1333 (10 torr) 1333 (10 torr) 1333 (10 torr)
Under 0.1MPa and 110ºC,vaporization rate of water (kg/m2·h) 7.2 7.2 7.2 7.2
When use condensator, model and power of vacuum pump (kw) 2X-15  2kw 2X-30 A  3kw 2X-70A  5.5kw 2X-70A  5.5kw
When does not use condensator, model and power of vacuum pump (kw) JZJS-70 7kw JZJS-70 7kw JZJS-70 7kw JZJS-70 7kw
Weight of drier (kg) 250 800 1400 2100

Company Profile:
Batch Type Explosion Proof Chamber Dryer
Batch Type Explosion Proof Chamber Dryer

Changzhou Aokai Drying Equipment Co., Ltd. was established in 2004, and is specialized in the design, manufacturing and development of the drying, calcination, cooling, crushing, mixing and granulating equipment. Aokai is located in Benniu Town Xinbei District of Changzhou City, close to Beijing-Shanghai Railway, Shanghai-Nanjing Expressway and Changzhou Airport.


The company has 4 modern standard workshops, about 13600 m2. There are 15 mid-level and senior engineers. It has more than 80 sets of processing devices and its annual production capacity can be more than 500 sets with over 30 categories. The company can provide dryer, solutions and service according to GMP, cGMP and FDA certification.

The company has obtained the certification of "National High-Tech Enterprise", been the member of China Pharmaceutical Equipment Industry Association. Also, the company has passed ISO9001:2008 Quality Management System Certification, ISO14001:2004 Environmental Management System Certification and many other certificates as well as 20 more core technologies getting patent certificates.

For a long time, the company focuses on the scientific and technological innovation, always persists in the technology upgrading as the core, and takes the optimizing of the product structure as the development direction. The company has a professional technical team to cooperate with some scientific and research institutes to develop new products, absorbs and digests advanced technologies from China and overseas, continues to explore various patent technologies to widely used in the fields of chemical, pharmaceutical, foodstuff, pigments, new materials and military industries. Aokai has already stepped into the international market and established a good reputation.

With the development, the company has accumulated strong capital and technical strength, created an intelligent and harmonious team. The company has a pilot plant with many types of testing machine for customers to do test and select suitable models.

Aokai sincerely welcome the majority of insight to make great achievement together. Also warmly welcome to Aokai.

FAQ:
1. Q: Please describe your warranty period.
    A: 15 months after the equipment is arrived at the destination port or 12 months after   the installation and commissioning of the equipment, whichever comes first.


2. Q: Do you provide on-site installation and commissioning?
    A: Yes, we do. If on request, we'll provide the guidance of on-site installation and commissioning. Usually one mechanical engineer and one electrical engineer to assist.

3. Q: How about the cost of on-site installation and commissioning guidance?
    A: The cost consists of round-trip air tickets, room and board expenses, service cost (labor cost), and site transportation (or directly provided by client), which shall be paid additionally.


4. Q: Are you a factory or a trading company?
  
 A: We are a professional manufacturer. We have a pilot plant for customers to do sample testing. 





 

Hammer Crusher Parts

Our primary products include: Hammer Crusher Parts,Jaw Crusher Parts, Cone Crusher Spare Parts, Ball Mill Parts, Feeding Equipment, Vibrating Screen, Gyratory Crusher Spare Parts and their related spare parts. Crusher Arm Guard Spare Parts,Gyratory Crusher Bowl Liner And Mantle,Gyratory Crusher Wearing Parts,Jaw Crusher Jaw Plate,Cone Crusher Mantle And Concave,Crusher Hammer Head,Ball Mill Crusher Lining Board Plate,Jaw Crusher Fixed Jaw Plates,Jaw Crusher Tooth Plate,Jaw Crusher Cheek Plate,Impact Crusher Parts,Cone Crusher Bowl Liners etc.

Metal Shredders Wear Parts,Scrap Shredder Grate,Metal Recycling Pin Protecter,Manganese Steel Top Grid

Baizhu Network Technology Co., Ltd. , https://www.baizhucasting.com