Cable Identifier and tracing tester

GD2134D Cable Identifier includes a transmitter and a receiver, it can be used to locate trace and depth of the underground cables and metallic pipes, also to identify the cable from a bunch of cables.


Features
 
Transmitter
 
Output (Three mode): Direct connection output, Clamp Coupling output, Radiation induction.
Frequency (6 for choice): 500Hz, 1kHz, 8kHz, 33kHz, 66kHz, 93kHz, including 500Hz and 1kHz is complex frequency. It can realize the function of Correct/False indication and pipe identification with the help of Receiver.
Fault signal output to detect Pipe grounding fault.
Power output: Max. 10W, 4 steps adjustable.
Automatic impedance matching and functions of overload&short-circuit protection.
Power supply: Internal rechargeable Lithium battery. It can be recharged by charger (AC 220V) or car cigarette lighter (12V).
If low battery, the instrument will shut down automatically, to protect battery.
Robust and portable.
 
Receiver
 
Left/Right arrow indication for Cable Route Tracing. (Patent technology)
Correct/False indication (Patent technology). It will point to the forward when the detected cable is traced correctly. Otherwise, it will point to the backward and it will show "?".
Strong anti-interference.
Automatic measurement of depth and current.
Various detection mode, more accurate.
Detection frequency: 500Hz, 1kHz, 8kHz, 33kHz, 66kHz, 93kHz, suitable for different conditions.
Two passive detection frequency bands: power frequency and radio frequency (RF). No need to connect with audio frequency generator.
History curve display.
Cable identification: Clamp identification and stethoscope identification. Clamp identification can measure the current amplitude and direction of cable precisely and give accurate result. Stethoscope identification is a traditional method when it is not convenient to use Clamp identification. It is easy wiring for Stethoscope identification.
Grounding fault location.
Built-in Rechargeable lithium battery.
Automatic shut down if there is no operation in 30mins.
Robust and portable.
 
 
Specifications
 
Transmitter
 
 
Receiver

Input mode: Built-in receiving coil, Clamp, 1k Stethoscope, 8k Stethoscope, A type fault detection device.
Receiving frequency:
Active Detection Frequency For Pipes: 500Hz, 1kHz, 8kHz, 33kHz, 66kHz And 93kHz.
Passive detection frequency: Power frequency and radio frequency (RF).
Clamp identification frequency: 500Hz, 1kHz complex frequency.
Clamp current measurement frequency: 500Hz, 1kHz, 8kHz.
Stethoscope identification frequency: 1kHz, 8kHz..
Grounding fault location frequency: 8Hz complex frequency.

Pipe detection mode:
 
Automatic Peak Method (Wide): It Is Suitable For Active Detection, With Left/Right Direction Indication. When The Frequency Is 500Hz And 1kHz, There Is Correct/False Indication.
Peak method: suitable for passive detection.
Narrow method
Null method

Cable identification mode:
Automatic Clamp identification
Clamp current measurement
Stethoscope identification
320*240 LCD display, shows signal amplitude, left/right direction, correct/false indication, history curve of signal strength, depth, current and result.
Built-in Lithium battery, rated 7.4V, 7Ah.
Charger: AC100-240V input, 50/60Hz, output DC 8.4V,2A/3A.
Size: 700*270*120mm
Weight: 3.5kg
Working condition: Temperature 0-40ºC, Humidity 5-90% RH, altitude<4500m.
 
GD2134D Cable Identifier includes a transmitter and a receiver, it can be used to locate trace and depth of the underground cables and metallic pipes, also to identify the cable from a bunch of cables.


Features
 
Transmitter
 
Output (Three mode): Direct connection output, Clamp Coupling output, Radiation induction.
Frequency (6 for choice): 500Hz, 1kHz, 8kHz, 33kHz, 66kHz, 93kHz, including 500Hz and 1kHz is complex frequency. It can realize the function of Correct/False indication and pipe identification with the help of Receiver.
Fault signal output to detect Pipe grounding fault.
Power output: Max. 10W, 4 steps adjustable.
Automatic impedance matching and functions of overload&short-circuit protection.
Power supply: Internal rechargeable Lithium battery. It can be recharged by charger (AC 220V) or car cigarette lighter (12V).
If low battery, the instrument will shut down automatically, to protect battery.
Robust and portable.
 
Receiver
 
Left/Right arrow indication for Cable Route Tracing. (Patent technology)
Correct/False indication (Patent technology). It will point to the forward when the detected cable is traced correctly. Otherwise, it will point to the backward and it will show "?".
Strong anti-interference.
Automatic measurement of depth and current.
Various detection mode, more accurate.
Detection frequency: 500Hz, 1kHz, 8kHz, 33kHz, 66kHz, 93kHz, suitable for different conditions.
Two passive detection frequency bands: power frequency and radio frequency (RF). No need to connect with audio frequency generator.
History curve display.
Cable identification: Clamp identification and stethoscope identification. Clamp identification can measure the current amplitude and direction of cable precisely and give accurate result. Stethoscope identification is a traditional method when it is not convenient to use Clamp identification. It is easy wiring for Stethoscope identification.
Grounding fault location.
Built-in Rechargeable lithium battery.
Automatic shut down if there is no operation in 30mins.
Robust and portable.
 
 
Specifications
 
Transmitter
 
 
Receiver

Input mode: Built-in receiving coil, Clamp, 1k Stethoscope, 8k Stethoscope, A type fault detection device.
Receiving frequency:
Active Detection Frequency For Pipes: 500Hz, 1kHz, 8kHz, 33kHz, 66kHz And 93kHz.
Passive detection frequency: Power frequency and radio frequency (RF).
Clamp identification frequency: 500Hz, 1kHz complex frequency.
Clamp current measurement frequency: 500Hz, 1kHz, 8kHz.
Stethoscope identification frequency: 1kHz, 8kHz..
Grounding fault location frequency: 8Hz complex frequency.

Pipe detection mode:
 
Automatic Peak Method (Wide): It Is Suitable For Active Detection, With Left/Right Direction Indication. When The Frequency Is 500Hz And 1kHz, There Is Correct/False Indication.
Peak method: suitable for passive detection.
Narrow method
Null method

Cable identification mode:
Automatic Clamp identification
Clamp current measurement
Stethoscope identification
320*240 LCD display, shows signal amplitude, left/right direction, correct/false indication, history curve of signal strength, depth, current and result.
Built-in Lithium battery, rated 7.4V, 7Ah.
Charger: AC100-240V input, 50/60Hz, output DC 8.4V,2A/3A.
Size: 700*270*120mm
Weight: 3.5kg
Working condition: Temperature 0-40ºC, Humidity 5-90% RH, altitude<4500m.
 

Guillotine Shear

The machine used is called a squaring shear, power shear, or guillotine. The machine may be foot powered, less commonly hand powered, or mechanically or hydraulically powered. It works by first clamping the material with a ram. A moving blade then comes down across a fixed blade to shear the material.
Metalworking guillotines operate by a clamp securing the sheet of material. Similar to the action of scissors, the blade shears the material, starting at one side of the sheet. ...... In hydraulic guillotines, energy for the tool comes from pressure in a hydraulic ram.

Guillotine Shear Machine,Guillotine Shear For Metal,Guillotine Shear For Sale,New type Guillotine Shear

Jiangsu Hoston Machine Tools Co., Ltd. , https://www.hostoncncs.com