The car engine is the brain of the car. If the engine is broken, it means that the entire car is useless. The car must run on the road every day. If it takes a long time, it may lead to wear or aging of the engine belt. Therefore, the owner usually starts to inspect the belt for a while to avoid unnecessary troubles.
Vehicle maintenance is defined for the belt wear and ageing prevention of automotive engines. The rare root belts are defined at the front of the machine and each belt bears the primary result. On the proposal machine, various types of auxiliary machines are driven via belt drives, such as the shrinking machines for air conditioners, power steering pumps, and alternators. Assuming that the belt is broken, slippage may occur, which will cause the related auxiliary engine to lose its function or reduce its function, and then affect the normal operation of the car.
The belt reflection method is very simple. First, introspect the tension of the belt. At this time, you can use the thumb to strongly press the belt between the two pulleys. The pressing force is about 10 kg. Assuming that the belt is about 10 mm in depression, it is considered that the belt tension is suitable for knocking. Assuming that the amount of reduction is excessive, the tension of the belt is considered to be insufficient. Assuming that there is almost no reduction in the belt tension, the tension of the belt is considered excessive. In the absence of tension, the belt is slippery. When the tension is too large, it is very easy to damage the bearings of various auxiliary machines. For this purpose, the relevant adjusting nuts or bolts should be loosened and the tension of the belt should be adjusted to the optimum shape.
In addition, car maintenance must also pay attention to the wear of the belt. Old belts are worn out and the contact area between belts and pulleys is drastically reduced. At this time, just press the belt with force and the belt sinks deep into the groove of the pulley. The belt rubber also has an aging problem. If the belt rubber is seriously aged, new belts must be changed in time.
Aluminum Die Casting with Painting
Aluminum Die Castings with Painting is a metal forming process in which molten aluminum metal is put under pressure and injected into a die. Aluminum Die Castings with Painting are lightweight alloys that have good corrosion resistance, mechanical properties, high thermal and electrical conductivity and strength at high temperatures. Aluminum alloys possess high dimensional stability for complex shapes and thin walls.
Aluminum Die Castings with Painting is efficient and economical and offers a wide range of durable shapes and components. Little or no machining is required after a part is die cast, because the process provides very close tolerances for even complex shapes. Aluminum die castings can also be easily plated or finished. Aluminum die castings are dimensionally stable and heat resistant.
Aluminum Die Casting With Painting, Aluminum Alloy Die Casting
Ningbo Zhenhai Xinxie Machinery Co.LTD , https://www.xinxie-diecasting.com
