Cone Fenders Marine Rubber Fender
As a kind of over 10 year aged products, the cone type rubber fender is becoming a trend of quay design, and becoming a new level for quay wall fender design.
1. The energy absorption doubles comparing with the super cell rubber fender with same spec.
2. In the case with similar reaction force and energy absorption, small size cone type fender can substitute relative large supper cell type fender, i. e., 800h cone type fender can substitute 1000H super cell fender, which can reduce the cost of quay wall construction.
3. In the case of oblique berthing (less than a angle of 10° ), the performance can not be reduced, which is preferred to cone model.
4. The frontal frame (steel frame) are installed in front of fenders, which can reduce the surface pressure against vessel hull. The surface can be limited below 25t/m2, which is suitable to large vessel especially.
5. The super high density polyethylene pads are adhered to the frontal frame, which can reduce the friction factor between hull and fender to below 0.2, and can reduce the shear (horizontal force) exerted on fenders when vessel berth, which can prolong the service life of fenders.
6. The frontal frame adopts water-tight structure with high strength and better anti-rust performance.
7. The rubber cone is rarely damaged or impaired, because it never contacts the hull directly.
| Accessories | Purpose |
| Anchor bolt | Mounting the fender on a wharf or a dolphin |
| U anchor | To hang the rubber spring chain |
| Frontal frame | Protecting the hull of vessel |
| Frontal pad | Reducing the friction coefficient and protecting the ship's hull |
| Weight chain | Support of frontal frame |
| Shear chain | Restraining the shearing deflection of the fendering system |
| Tension chain | Resisting stretching of the fender at partial compression |
| Steel mount | Increase fender deflection (equal to 0.5 times the fender height) |
Fiber Laser Cutter With Safety Cover
Laser cutting is applied to metal materials such as mild steel, stainless steel, aluminum alloy, pickling plate, galvanized sheet, silicon steel plate, electrolytic plate, titanium alloy, manganese alloy. The laser cutting can process with a thickness range of 0.5-40mm Mild steel, 0.5-40mm Stainless steel, 0.5-40mm Aluminum, 0.5-8mm Copper.
Laser cutting is a sheet metal processing that laser beam radars on the processing material. Laser cutting works by directing the output of a high-power laser most commonly through optics. The laser beam can be divided into solid state and un-solid state
Fiber Laser Cutter Industrial,Fiber Optic Cnc Laser Cutter,Cnc Fiber Laser Machine,Fiber Laser Engraving Machine
JINAN XUANLIN MACHINERY CO., LTD. , https://www.cncxuanlin.com