Custom Made Die Cast Aluminum Parts LED Aluminum Heat Sink Mold Parts

 

PROCESS

Drawing→ Mold → Die casting  →  Deburring  →  Drilling holes  →  Tapping  →  CNC Machining  →  CNC control center  →  Polishing  →  Surface Finishing   →  Assembly  →  Quality Inspection  →  Packing
 

DESCRIPTION

1 Drawing:provide by customer, or design according as the sample.

2  Mold:Design and produce by ourself.

3  Product Material Option: A360,A380,ADC12,ADC3,AlSi12,AlSi9Cu,ZL102,ZL104

 

Production Capacity:

1: 2 set ABB Robotic arm arm for auto cast cylinder head mould.

 operation 6 set moulds for cylinder head,/2 shift/1200pcs each day.

 Average 20Tons aluminum  each day.

2: Traditional casting: 

Flexible replacement of different mould casting.                                   

2 shift operation for 10~20 kinds of item.

Total 1000~2000 piece parts is casting capacity each day. 

3: Machining:

For Cylinder Head:(A,B,C,D,E,F) six lean production lines for machining cylinder head. 

24hours working.

Total finished machining part1000pcs and shipment 1000pcs each day.

For Export Part:

15 sets CNC machine can be 24hours working for several hundred different part.

There are flexible replacement in production. 

More than Tens of thousands of different export part on each month.

Total 1000~2000piece parts finished each day.

 

PROCESS

Drawing→ Mold → Die casting  →  Deburring  →  Drilling holes  →  Tapping  →  CNC Machining  →  CNC control center  →  Polishing  →  Surface Finishing   →  Assembly  →  Quality Inspection  →  Packing
 

DESCRIPTION

1 Drawing:provide by customer, or design according as the sample.

2  Mold:Design and produce by ourself.

3  Product Material Option: A360,A380,ADC12,ADC3,AlSi12,AlSi9Cu,ZL102,ZL104

 

Production Capacity:

1: 2 set ABB Robotic arm arm for auto cast cylinder head mould.

 operation 6 set moulds for cylinder head,/2 shift/1200pcs each day.

 Average 20Tons aluminum  each day.

2: Traditional casting: 

Flexible replacement of different mould casting.                                   

2 shift operation for 10~20 kinds of item.

Total 1000~2000 piece parts is casting capacity each day. 

3: Machining:

For Cylinder Head:(A,B,C,D,E,F) six lean production lines for machining cylinder head. 

24hours working.

Total finished machining part1000pcs and shipment 1000pcs each day.

For Export Part:

15 sets CNC machine can be 24hours working for several hundred different part.

There are flexible replacement in production. 

More than Tens of thousands of different export part on each month.

Total 1000~2000piece parts finished each day.

Dioctyl Adipate

Dioctyl Adipate is one of the most extensively used plasticizers in plastics/rubber processing. It has comprehensive properties, such as high plasticizing efficiency, low volatility, UV-resisting property, water-extracting proof, cold-resisting property, and also of good softness and electric property.

Chemical properties:
A colorless, transparent, oily liquid with a slight odor. Do not dissolve in water, soluble in organic solvents such as ethanol, ether, acetone, acetic ACID.

Usage:

Used as an excellent cold-resistant Plasticizer for polyvinyl chloride, which can impart excellent low-temperature softness to products.

1.Insoluble in water, soluble in methanol, ethanol, ethyl ether, acetone, acetic acid, chloroform, ethyl acetate, petrol, toluene, mineral oil, vegetable oil and other organic solvents, slightly soluble in ethylene glycol.

2.As cold plasticizer, it can be usedc in polyvinyl chloride, polyethylene copolymer , polystyrene, cellulose nitrate, ethyl cellulose and synthetic rubber as an typical cold plasticizer,with high efficiency, small heat discoloration; it can give product a good softness at low temperature and light fastness

Dioctyl Adipate,Dioctyl Adipate For Wire,Doa Artificial Leather,Dioctyl Adipate Agricultural Grade

HENAN JINHE INDUSTRY CO.,LTD , https://www.hncarbonblack.com