·Development and Reform Commission: Prospects for parts and remanufacturing industry are good

Li Pumin, secretary general of the National Development and Reform Commission of China, said on the 17th that in recent years, China's auto industry has maintained an average annual growth rate of more than 10%. It is estimated that by 2016, the number of domestic civilian vehicles will reach 200 million. According to the development and proportion of automobile ownership and remanufacturing in developed countries, China's auto parts remanufacturing industry will usher in a good market prospect. .
Li Pumin made the remarks at the launching ceremony of the theme of “Remanufacturing Products (Auto Parts) Entering Auto Parts City”.
The re-manufacturing theme publicity campaign was approved by the National Development and Reform Commission and co-sponsored by the China Economic Herald and other institutions. The theme of the event will be “Hand in Hand with Auto Parts City and Promote Remanufacturing”. From November 17th to 28th, it will be held in Beijing, Jinan, Nanjing, Shanghai, Hangzhou, Xiamen and Guangzhou in seven auto parts cities (4S stores). Remanufactured products (auto parts) entered the Auto Parts City theme publicity day to promote remanufacturing industry policies, technology levels, industry development, and remanufacturing products into the market.
Li Pumin said that the development of circular economy is a major strategic decision of China and a major measure to implement the strategic plan for the construction of ecological civilization in the 18th National Congress of the Communist Party of China. It is to accelerate the transformation of economic development mode and build a resource-saving and environment-friendly society. The inevitable choice for sustainable development. Remanufacturing of auto parts is an important content and concrete practice for promoting the development of circular economy in China. It is also a positive and effective measure generally adopted by the auto market in economically developed countries. Remanufacturing has become an important industry.
He stressed that he hopes that more industry enterprises will have a deeper understanding of the country's industrial development policies on remanufacturing, further understanding of the important support of the industry in the establishment of a circular economy system, and actively join the remanufacturing industry. At the same time, we hope that more consumers will recognize the remanufactured products and use remanufactured products. Through the joint efforts of the state, enterprise producers and consumers, we will actively build a market for remanufacturing industry in a healthy and orderly development.
According to relevant experts, remanufacturing refers to the use of high-tech to repair or upgrade old mechanical and electrical products to restore them to a batch manufacturing process like new products or better than new products.
A few days ago, the National Development and Reform Commission and other five ministries and commissions issued the "Notice on Printing and Remanufacturing Products for the Replacement of the Older" pilot program, which gave favorable support and promotion to further expand the market share of remanufactured products.

Custom Thermoforming

Thermoforming is a manufacturing process used to shape plastic sheets into various custom design products. It involves heating a plastic sheet until it becomes pliable, then using a mold or a vacuum to form it into the desired custom shape.

Thermoforming and vacuum forming are both processes used to shape plastic sheets into specific forms. However, there are some differences between the two techniques:

1. Process: In thermoforming, a plastic sheet is heated until it becomes pliable, and then it is pressed against a mold using pressure or a vacuum. Vacuum forming, on the other hand, relies solely on the use of a vacuum to draw the heated plastic sheet onto the mold.

2. Mold complexity: Thermoforming is typically used for more complex shapes and intricate molds, as it allows for greater detail and precision. Vacuum forming, on the other hand, is better suited for simpler shapes and molds that do not require as much detail.

3. Material thickness: Thermoforming is often used for thicker plastic sheets, typically ranging from 0.030 to 0.250 inches in thickness. Vacuum forming is more commonly used for thinner plastic sheets, typically ranging from 0.005 to 0.060 inches in thickness.

4. Production volume: Thermoforming is generally more suitable for high-volume production due to its faster cycle times and ability to handle larger sheets of plastic. Vacuum forming is better suited for low to medium volume production, as it has slower cycle times and is limited by the size of the vacuum forming machine.

5. Cost: Thermoforming typically requires more expensive equipment and molds, making it a more costly process compared to vacuum forming. Vacuum forming, on the other hand, is a more cost-effective option for smaller production runs or prototypes.

Overall, thermoforming is a more advanced and versatile process that offers greater precision and complexity, while vacuum forming is a simpler and more cost-effective option for less complex shapes and smaller production volumes.

Thermoforming is a versatile process that is widely used in industries such as packaging, automotive, aerospace, and medical. It offers advantages such as cost-effectiveness, quick turnaround times, and the ability to produce complex shapes with high precision.

Custom Thermoforming,Thermoforming Plastic Products,Thermoforming Process,ABS Thermoforming

Dongguan Yiyongli Industrial Co.,Ltd. , https://www.dgthermoforming.com