Dixin 980 Shaped High Strength Bearing Steel Structure Floor Decking Cold Roll Forming Machine

DiXin 980 Shaped High Strength Bearing Steel Structure Floor Decking Cold Roll Forming Machine



 
Working flow:
manual uncoiler-roll forming machine-computer control system-hydraulic system-forming part-cutting part-discharge table 


No
Technical Specification
1
Manual Uncoiler
Usage:It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. Loading capacity:1.2T,Inner diameter: 500-508mm
2
Feeding Table
Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.
3
Main Roll Forming Machine
Material of rollers:45# steel,roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped
4
Hydraulic System
Computer Control Cabinet
Power:5.5kw,Hydraulic oil: 40#
hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use
PLC:EURA
5
Shearing Mechanism
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
Material of blades: Cr12,quenching treatment
6
Output Table
 
It adopts welded steel and supported roller to transmit the products,which is used to collect the finished products.


Company Introduce:
Our enterprise, Cangzhou Dixin Roll Forming Machine Co., Ltd, as the professional and leading manufacturer, can manufacture, design, installation and debug various roll forming machines and metal processing sheet equipments, which produce metal roof wall panel, glazed roof tile, CZ steel  purlin, floor decking, roof ridge cap, sandwich panel, roof truss, shutter panel, shutter slat, door frame, guardrail, and metal sheet uncoiler, bending, slitting, cutting, flattening, punching, crimping.
Backed by reasonable design, precision machining and selected material, both our standard and customized machines are characterized by long life span, precise forming and easy operation. With our customers' trust, our machines have been sent to America, Australia, Russia, India, Sri Lanka, Nigeria, Pakistan, Uzbekistan, Mozambique, Angola, Turkey, Brazil, etc.
Warmly welcome to China to visit our factory and select the machines you need. Our address,Fuzhuang Industrial Development Zone, Botou City, Hebei Province, China

Our Services
First,we can produce the special machine,send your drawing to us,we can design for you.
 
Second,if you buy our products,we also can help you to purchase the material,like color roll,the price is lower than you buy by yourself.
 
Third, we provide a one year warranty and lifelong technical support,we can send our technicians to you to give you on-site training.
 
Four,engineers available to service machinery overseas.
 
 
Five, if you come to visit our factory,we can book the room for you,car pick up to send.

FAQ

1. Q: Are you manufacture or trading company?
    A: We are manufacture who was signed in 2008. And our boss has ten years' experience in machinery.
 
2. Q: When did u start producing roll forming machine?
    A: Our company was signed in 2008, and our boss has ten years' experience of machinery.
 
3. Q: Why should I choose you?
    A: We have years' experience to design and provide lower price for customer.
 
4. Q: How many kinds of products do you produce?
    A: We have produced dozens shape of panels including trapizoid, glazed, roof ridge and door panel, and so on for customers during last years. We also provide EPS and rock wool panel line.
 
5. Q: Where is your factory located? How can I visit there?
    A: Our factory is located in Botou, Hebei province. We could pick you up from Cangzhou Station or Beijing airport when you come.
 
Any other question,please feel free to contact me. Tel:+86 18231737651

Whiteboard Steel

Whiteboard steel is typically made by applying a special type of paint to a sheet of steel. The paint is usually a type of epoxy resin that is mixed with a hardener to create a durable, glossy surface. The steel is first cleaned and treated with a primer to ensure that the paint will adhere properly. Then, the paint is applied in several layers, with each layer being allowed to dry before the next is added. The result is a smooth, non-porous surface that is resistant to stains and easy to clean.

Whiteboard steel is available in a variety of thicknesses, ranging from thin sheets that can be mounted on walls to thicker panels that can be used as freestanding whiteboards. It is also available in a range of sizes, from small desktop versions to large wall-mounted boards that can be several feet wide. Some whiteboard steel is magnetic, which allows it to be used with magnets and other magnetic accessories.

One of the advantages of whiteboard steel is that it is a very versatile material. It can be used for a wide range of applications, from simple note-taking to more complex brainstorming sessions. It is also a popular tool for teaching, as it allows teachers to write and draw diagrams that can be easily seen by their students.

Another advantage of whiteboard steel is its durability. Unlike traditional whiteboards, which can become stained and discolored over time, whiteboard steel is resistant to damage and can last for many years with proper care.

Overall, whiteboard steel is a useful and versatile material that is ideal for a wide range of applications. Its durability, ease of use, and versatility make it a popular choice for classrooms, offices, and homes alike.

Whiteboard Steel,white steel sheet,whiteboard steel board,ppgi white,whiteboard sheet coil

Wuxi Shengshu Metal Co., Ltd. , https://www.wuxissmetal.com