• Posted on

Good Performance 12V/24V R134A DC Refrigeration Hermetic Compressor for Car Freezer Qdzh35g

Model NO.: QDZH35G
Refrigerant Type: Freon
Type: Piston
Power Source: AC Power
Configuration: Stationary
Application: High Back Pressure Type, Low Back Pressure Type
Mute: Mute
Trademark: sikelan
Transport Package: Carton and Pallet
Specification: QDZH35G
Origin: China
HS Code: 8414301100
1-MAIN FEATURE:
High efficiency
Low vibration
Good reliability
Experienced staff ensure produce of the compressors with good quality.

2-SIMPLE SPECIFICATION:
1)QDZH35G, DC series, use R134a refrigerant;
2)Voltage application 12/24VDC;
3)Cooling type: FC;
4)Application: Low Back Pressure;
5)Max Cooling Capacity: 100W;
 
Serial Model Displacement (cm3) Rotate Speed       (rpm) Capacity COP EER Oil charge Cooling Type Power Supply Certificate
-23.3ºC (ASHRAE)
W Kcal/h Btu/h W/W Btu/W.h ml
L QDZH25G 2.5 2000 43.0 37.2 146.0 1.08 3.68 130 FC 12/24V (DC) CE
2500 53.0 45.8 186.0 1.05 3.58
3000 62.0 53.5 211.0 1.06 3.62
3500 72.0 62.2 245.0 1.04 3.55
QDZH30G 3.0 2000 52.0 44.6 176.0 1.05 3.58
2500 64.0 55.0 217.0 1.05 3.58
3000 75.0 64.3 254.0 1.06 3.62
3500 87.0 74.7 295.0 1.04 3.55
QDZH35G 3.5 2000 60.0 51.9 204.6 1.08 3.68
2500 73.0 63.1 248.9 1.07 3.65
3000 86.0 74.4 293.2 1.06 3.62
3500 100.0 86.5 341.0 1.05 3.58
QDZH43G 4.3 2000 80.0 69.1 273.0 1.15 3.92
2500 96.0 82.9 327.6 1.2 4.09
3000 115.0 99.4 392.4 1.25 4.27
3500 138.0 119.2 470.9 1.25 4.27
MK QDZH50G 5.0 2000 87.0 75.2 296.8 1.17 3.99 180
2500 104.0 89.9 354.8 1.13 3.86
3000 130.0 112.3 443.6 1.35 4.61
3500 163.0 140.8 556.2 1.2 4.09
QDZH65G 6.5 2000 120.0 103.6 409.4 1.2 4.09
2500 150.0 129.6 511.8 1.2 4.09
3000 180.0 155.5 614.2 1.2 4.09
3500 210.0 181.4 716.5 1.2 4.09


3-CERTIFICATE: CE.

4-STORAGE CONDITION:
1)Compressor should be stored in a dry and drafty place
2)Compressor should not be tilted or inverted in storage, transportation and
Installation; Collision should be avoided.
3)Rubber plugs should not be pulled out from discharge tube before installation so
As to avoid impurity and humidity. During the installation, the rubber plugs of
Discharge tube should be pulled out at first, then the rubber plugs of process
Tube, and the rubber plugs of process suction tube at last. The installation should
Be completed within 10 min after that.
4)The accessories (eg. Starter, thermal protection etc. ) are nor installed into
The compressor while delivery, but in the accessory case. Be sure to select the
Corresponding starter and thermal protection models rightly.

Plastic Injection Components

There are many methods of plastic molding. Injection molding is one of them. Injection molding is also called injection molding, which is called injection molding for short. It is a main molding method of thermoplastic. Because it has the advantages of wide application, short forming cycle, high production efficiency, good production conditions, easy mechanization and automation, it plays an important role in the whole plastic forming process.Injection molding refers to injecting granular or powdery plastic from the hopper of the injection machine into the high-temperature barrel, heating, melting and plasticizing to make it a flowing melt, and then under the high pressure of the plunger or screw of the injection machine, it passes through the nozzle at a large flow rate and is injected into the mold cavity. After a period of pressure maintaining, cooling and shaping, When the mold is opened, the Plastic Parts with certain shape and size can be detached from the mold cavity. In this way, the time required to complete an injection cycle can range from a few seconds to tens of seconds, which mainly depends on the size and thickness of the workpiece.Img 9508

Plastic Injection Components,Plastic Injection Molding Components,Plastic Injection Molding Mach,High Pressure Custom Plastic Injection Molding

Suzhou Dongye Precision Molding Co.,Ltd. , https://www.sjdongye.com