Iskar will market end mills with different blade spacing
Iskar will be listed on the solid-endMill "ChatterFree" for metal model processing. By arranging the blades at different intervals, high-frequency vibration is suppressed. At the same time, the chip discharge capacity and the processing surface roughness level are improved. High-load machining is possible even for machines with low spindle rigidity (BT30/40).
This product uses TiAlN's PVD (physical vapor deposition) coating film "IC900". The IC900 has a surface hardness of 3,500 HV and can be processed up to 800 °C. In addition to steel, it can also be used in difficult-to-cut materials such as stainless steel, hardened steel, and heat-resistant steel.
The product has a twist angle of 38°. It includes a 4-blade type and a 5-blade type, and is available in models with a blade diameter of 6 to 20 mm.
This product uses TiAlN's PVD (physical vapor deposition) coating film "IC900". The IC900 has a surface hardness of 3,500 HV and can be processed up to 800 °C. In addition to steel, it can also be used in difficult-to-cut materials such as stainless steel, hardened steel, and heat-resistant steel.
The product has a twist angle of 38°. It includes a 4-blade type and a 5-blade type, and is available in models with a blade diameter of 6 to 20 mm.
Linear Guideway,Bearing Slide Rail,Ball Bearing Rail,Linear Guide Rail Systems
Guangdong TICO Automation Technology Co.,Ltd. , https://www.tico-robots.com