KCB Magnetic Transmission Gear Pump Product Features
The key components of the magnetic actuator consist of an outer magnetic rotor, an inner magnetic rotor, and a non-magnetically conductive isolation cover.
Magnetic transmission gear pump is a new type of pump, its working principle is the application of modern magnetic principles, the use of magnetic transmission of permanent magnets to achieve torque-free transmission, a simple explanation is that the medium is enclosed in a static isolation sleeve, to achieve no leakage The purpose of the pumping medium completely solves the shaft seal leakage of the mechanical transmission pump. Of course, these are all achieved through the magnetic field. The magnetic field lines drive the inner rotor (ie the inner magnet) assembly and the impeller to rotate synchronously through the isolation sleeve. The pump is a completely sealed, leak-free and pollution-free new industrial pump.
Magnetic gear pump When the motor drives the outer magnetic rotor to rotate, the magnetic field can penetrate the air gap and non-magnetic material, drive the inner magnetic rotor connected with the impeller to rotate synchronously, realize the dynamic non-contact transmission, and transform the dynamic seal into a static seal. Because the pump shaft and the magnetic rotor are completely closed by the pump body and the isolation sleeve, the problem of “running, running, dripping, and leaking†is completely solved, and the leakage of flammable, explosive, toxic, and harmful media through the pump seal in the oil refining chemical industry is eliminated. Security risks.
The magnetic transmission gear pump has a compact structure, convenient maintenance, safety and energy saving, because the magnetic coupling and the pump body are combined into one.
The magnetic coupling of the magnetic transmission gear pump also has a great effect, and it can act as overload protection for the transmission motor.
The magnetic pump is characterized by corrosion resistance because the pump's flow components are made of stainless steel and engineering plastics.
Magnetic transmission gear pump structure features:
(1) All moving parts of the pump are lubricated with the transmission medium (2) Safety valve overload protection is provided (3) Fully sealed, no leakage (4) Positive/reverse rotation, no effect on the pump.
KCB type magnetic transmission gear pump is suitable for the transportation of petrochemical industry process without solid particles and fibers, the temperature is not higher than 120 °C viscosity of 5 ~ 1500cst of a certain degree of lubricating fluid. It is designed to prevent liquid leakage. It can be used in the sampling, delivery, distribution, recycling, canning and other industries of various liquids. It is especially suitable for the transportation of corrosive, toxic, polluted, highly permeable and expensive media.
Magnetic drive pump installation and use:
1. The magnetic pump should be installed horizontally and should not be erected. For special installations with vertical requirements, the motor must face upwards.
2. Open the suction pipe valve before starting. If the pumping surface is lower than the pump shaft line, the pipe must be equipped with a bottom valve.
3, the pump should be checked before use, the motor fan leaves to be flexible, no stuck no abnormal sound, the fasteners to be fastened.
4. Check if the direction of rotation of the motor is the same as that of the magnetic pump.
The Submersible pump is a multistage Centrifugal Pump. It is suitable for 41/2 "and the above casing. At 50 hertz, the displacement range is 20-3000m3/d. The variable frequency device can be used to get a larger displacement. The advanced CAD design is used for the guide wheel of the submersible pump. The single stage lift and efficiency are high. Users only need to provide the pump performance, such as flow rate, lift and efficiency, and so on, and then get a * * * * product. At the same time, we can use different materials to make pump grade according to the well condition. Nickel alloy cast iron, high chromium wear resistant cast iron, copper aluminum alloy, stainless steel, all kinds of materials can be selected arbitrarily, can provide high sand, high gas well pump according to the customer's requirement.
Our company has become the main design and production plant of international Electric Pump and leaf guide wheel.
Submersible Electric Pump,Petroleum Submersed ,Water Pump,Electric Pump
Tianjin RongHeng Group LLC , https://www.ronghenggrouppump.com