Local Mechanical Display and Pulse Output Car Boat Fuel Consumption Flow Meter

Flow Meter Fuel Consumption Flow Meter

A.[Features of Fuel consumption flow meter]

Professional flow meter for fuel consumption

This flow meter just for fuel consumption engine

High Accuracy 

This flow meter with 1.0% high accuracy by the rotate piston principle

Display and Output

The fuel consumption flow meter with local mechanical display and pulse output(optional)

Prevent Steal Oil

The fuel consumption flow meter can prevent stealing oil by driver and reduce the cost.

Normal Function

360° Cover , waterproof ,dustproof and connection with GPS.

B.[Parameter]

B:Filter

R:Pulse output

OEM:Pulse output but without Display

C.[Function]

• Ensure direct measurement accuracte, easy and safe.
• It has function same aire elimilator.
• Pulsation will disappear when fuel goes through the adjustor.
• The pressure in return line will be zero with the adjustor.
• The V4 series is suitable for engines less than 200KW;The V8 series is suitable for more than 200KW to 500KW.
• They are widely apply to various engines,such as the vechicles;boats;generators,etc.

D.[Installation]

Note:

• The operator must have some experience;
• The flow meter can not installa near by the exhaust pipe to avoid increase the error
• The flow meter shoud be installa the location where low shock
• The flow meter should be installa where is easy to read the data
• To ensure the pipeline without air to avoid increasing error
• Installa the flow meter where lowest of pipeline
• Suggest installing the return oil processor
• Replace filter regular

Belt Pulley

The die casting process involves the use of a furnace, metal, die casting machine, and die.

The metal, typically a non-ferrous alloy such as aluminium or zinc, is melted in the furnace and then injected into the dies in the die casting machine. After the molten metal is injected into the dies, it rapidly cools and solidifies into the final part, called the casting parts.

The castings that are created in this process can vary greatly in size and weight, ranging from a couple of ounces to 100 pounds. One common application of die-cast parts are housings - thin-walled enclosures, often requiring many ribs and bosses on the interior.

Metal housings for a variety of appliances and equipment are often die cast.

Several automobile components are also manufactured using die casting, including pistons, cylinder heads, and engine blocks. Most home appliances also need lightweight and firm aluminum die casting parts, like bracket, heat dissipation module or structural support. Other common die cast parts include propellers, gears, bushings, pumps, and valves.

Belt Pulley,Wind Impeller,Washing Machine Pulley,Washing Machine Motor Pulley

Ningbo Sunlee Electrical Technology Co. , Ltd. , https://www.sunleeelectric.com