Rural wireless monitoring wireless WIFI coverage solution
As rural young and middle-aged laborers go out to work, there are phenomena such as “staying elderly†and “left-behind children†in rural areas, which brings tremendous pressure on rural public security. To control the security situation in rural areas, it is difficult to rely on a single police force and traditional means. It is necessary to rely on technical defense measures to establish a comprehensive prevention system led by technology prevention so as to adapt to the requirements of the "Peaceful Countryside" and new rural construction under the new situation. .
Compared with cities, the rural technology defense system is relatively single and its functions are not very powerful, but it also needs to be managed and used well. Therefore, it is necessary to strengthen and improve the level of technical protection in rural areas. The quality of life of peasants at the on-site stage has been greatly improved, and their own security needs have become more and more intense.
The user currently has such a demand. There are about 5 to 8 monitoring points in the village, which are mainly set in the main intersections of the village, village elementary school entrances, village cultural squares, etc. These images are aggregated to the village department for monitoring and Storage, at the same time, these images are transmitted wirelessly to the township government, and then transmitted by the township government to the county comprehensive management department using a wired network for unified management. At the same time, in order to enrich the amateur cultural life of the rural people, after transferring the Internet network in the town to the village, WIFI coverage is adopted so that the public can use modern intelligent terminals to connect to the Internet and learn about the rich network knowledge.
Since the monitoring points of rural monitoring systems are usually distributed on both sides of the road, or between relatively open fields, in many cases, residents are not willing to destroy their houses or fields for no reason. Even if they are only a little bit scared, they are not willing to. Damage to the appearance of your house or field, so the choice of installing cables is less desirable. The application of wireless monitoring equipment can achieve normal monitoring without laying cables. In addition, the monitoring points in rural areas are generally chosen to be installed on the street lights on both sides of the road. Then only the wireless transmission equipment and the wireless monitoring equipment are installed on the light poles, and they can be put into use immediately, which is convenient and time-saving. To sum up, the use of wireless devices for transmission has become the first choice in rural security construction. Our company has provided a complete set of wireless transmission solutions.
As shown below:
For the main monitoring points in rural areas, we can use our company's wireless equipment SF-5017CH for transmission. Some of them can be transmitted to the village department in a one-to-two way. Some of the more decentralized monitoring sites can be transmitted to the village monitoring center using wireless devices in a one-to-one fashion. Some remote monitoring sites can use a small part of the front end. After summarizing and summarizing, it is transmitted to the monitoring center of the village through one device, while the monitoring point of the village is wired to the monitoring center of the village.
After the monitoring points are all summarized, because the village is far away from the town government, we can use our company's long-distance large-bandwidth wireless equipment SF-5000MS series for transmission. After being transferred to the town government, it can be transmitted to the county using a wired network.
The second part is the part covered by WIFI. Our company's solution is to install three sets of our company's 2.4G wireless equipment SF-2414CH on the roof of the village building, using three 120-degree angle antennas, with the center of the village as the center. The village is covered by WIFI and there are suburbs covering more than 1km.
This article deals with product information, please click:
SF-5017CH: http://. . Com/aspcms/product/2016-3-10/334.html
SF-5000MS: http://. . Com/aspcms/product/2016-3-10/333.html
SF-2414CH: http://. . Com/aspcms/product/2016-2-24/330.html
If the appearance of the product is updated, please refer to the details!
This is our PT160 ISO11784 FDX-B Pet Microchip Scanner for dog/cat (ISO11784 Microchip Scanner /Microchip Scanner for dog/cat/FDX-B Pet Microchip Scanner)
PT160 reader is smaller, simpler and easier to operate. It uses rechargeable lithium batteries which is more environmentally friendly. It can read all 134.2khz FDX-B tags with a distance of 5-10cm. It can read all the 15 digit chip under ISO11784/5 fdx-b 134.2KHZ Chips.
Wuxi FOFIA was founded in 2002 in Jiangsu, We develop and manufacture a large range of animal ID products including injectable microchips,Animal temperature microchips, LF ear tags, UHF ear tags ,visual ear tags and all kinds of RFID readers. We provide complete hardware solutions for animal husbandry in various countries around the world.
Our products can used for cattle, sheep, goat, pig, fish, pets and wild animals and we have exported to more than 90 countries during the past 20 years.
FOFIA has won a good reputation with our high-quality products, fast delivery time and excellent after-sales service. We do our own brand and also we welcome all kinds of OEM.
We have skilled workers, fully automated production lines and a professional technical team. Welcome customers all over the world to come to us to discuss cooperation, we will provide you with a satisfactory solution.
Pet ID Reader, Universal Microchip Scanner,Pet Chip Reader
Wuxi FOFIA Technology Co.,Ltd. , https://www.fofiatag.com