Semi-trailer license plate installation

1. The license plate should be installed without any deformation or punching, and it should be perpendicular to the ground. The error should be less than 15 degrees 2. The camera should be fixed on each side with two special seals for license plates issued by the issuing authority. The former number plate must be installed in the middle or right side of the front lower front part of the vehicle body. The rear number plate must be installed in the middle or left position of the front lower rear part of the vehicle body. 5. All production after October 1, 1992 All types of motor vehicles must be designed and manufactured in accordance with the above requirements and the size specifications of the number plate to manufacture corresponding mounting positions or number plate racks. 6. Large-sized trucks and trailers must be spurted to write the magnification number of the car number plate at the rear fence board. 2.5 times, the font standard is the same as the number plate. 7. The large truck trailer should have a trailer plate (a semi-trailer host plate), and spray the amplified number to issue a driving license. That is, the host and the trailer are not a number plate.

Tungsten Carbide Knives

Tungsten carbide material is widely used in different industries because of it`s hardness, wear resistance, strength, toughness, heat and corrosion resistance. We can manufacture different kinds of cemented carbide knives in all industries, including woodworking, corrugated, tobacco, food processing, textile, rubber, steel conveying industries and some others.
Being the leading manufacturer in tungsten carbide industry, we produce the blanks and further finish them by ourselves, which saves the costs and allows us have full control over our knives. We can produce according to your samples or drawings.
We promise that all your needs and projects will be properly handled here at Zhengtong.

Tungsten Carbide Knives

Tungsten Carbide Knives,Industrial Carbide Knife,Hard Alloy Industrial Blade,Industrial Use Carbide Knives

Zhengtong Special Material Factory Hi&New Tech Zone Chengdu , https://www.ztferre.com