Shan Fung Machinery Blender Safety
Blender using safe editing
1. The mixer should be set in a flat position, and use square wood to lift the front and rear axles to make the tires stand overhead so as to avoid walking when starting.
2. The secondary leakage protection should be implemented in the mixer. After the power supply is turned on before work, it must be checked carefully. After the empty vehicle is tested and passed, it can be used. During commissioning, it is necessary to check whether the mixing drum speed is appropriate. In general, the proportion of empty cars is slightly faster (after loading), 2 to 3 turns. If there is a large difference, the ratio of the driving wheel to the transmission wheel should be adjusted.
3. The rotation direction of the mixing cylinder should follow the direction indicated by the arrow. If it is not true, the motor wiring should be corrected.
Choke Seat,Choke Bean,Choke Stem,Drilling Parts,Drilling Components,Tungsten Carbide Drilling Parts,MWD and LWD tools,MWD carbide erosion-resistant parts,Tungsten carbide LWD stabilizer,Carbide LWD flow control
Zigong MT Cemented Carbide Tech Co., Ltd. , https://www.mtcarbide.com