Shandong Lingong LFT30 large-scale wood clamper successfully went offline, still the first in China!

Shandong Lingong LFT30 large-scale clamp machine successfully offline

Grasping wood loader is an important mechanical equipment in the construction of construction machinery, widely used in ports, logging sites, wood processing plants. This product overcomes the drawbacks of the prior art, such as the small grasping ability of the wood loader and the low loading and unloading efficiency. Compared with the prior art, the power transmission ratio of the working device is large, and the force transmission ratio changes little during the lifting of the boom. The highest lift position can guarantee 15 tons of lift and gripper turn-up ability; when the ground fork operation is performed, the rocker arm is turned back to avoid contact with the front end timber, and the angle change of the gripper during boom lifting is small and the lift is more Smooth, it can meet the requirements of high efficiency such as large customers such as ports.

Shandong Lingong LFT30 Large Wood Cutter

The LFT30 large-scale wood clamper is fully optimized in terms of power system. It uses a reinforced front and rear frame, forward six-bar linkage device, vertical cylinder, and a newly designed large clamp fork. When the fork tip is closed, the wood clamp is closed. The area is large and the shape is similar to the section of the wood loaded by the transporter, which facilitates the loading and unloading of short wood within a single 15 tons of weight. The machine has strong power, reasonable matching, large traction and strong grabbing capacity, and meets the requirements for heavy load conditions. (This article comes from Shandong Lingong)