Submersible Deep Well Pump/Borehole Pump (SP)

 

For Pump

Max Flow: 6.5 m3/h

Rotary Speed: 2900r/min

Head: 9-192m

For motor

Adopted the NEMA standard

Power: 0.37 to 2.2 kw(single phase)

Power: 1.1 to 4 kw(three phase)

Insulation class: B

Protection grade: IP58

Max diameter: 96mm

Highest tempreature of liquid: 40 ºC
 

5.Parameters table( more models pls feel free to contact us)
 

6.FAQ

1.Q: Are your company is trading company or manufacture?

   A: Pacific Pump Group Co.,Ltd. is a large professional manufacture for more than 18 years in china,and produce with their own factory.

2. Q: What's your factory workshops?

    A: Our factory produce include casting,mechanical process,lathe process,heat treatment,assembly,and test,etc.Warmly welcome to visit & test our factory any time.

3. Q: How about your Submersible deep well pump price?

    A: Our price is factory price,and insist high quality for long-term cooperation.

4. Q: How to do if the pump or parts have operation problem within your warranty?

    A: Tell me details timely,and show me pictures,we will send you solution at once without any hesitation.

5. Q: We don't know which pump model we need,can u help us?

    A: Yes,pls tell me your detail requirement,include liquid,flow rate,head,etc.and our engineers team will calculate & select most suitable pump model for u,offer pump solution for u.

7.Service

 

Before-sale service

Product introduction, technical exchange, non-standard product design, problem explanation. 

 

 

 

For Pump

Max Flow: 6.5 m3/h

Rotary Speed: 2900r/min

Head: 9-192m

For motor

Adopted the NEMA standard

Power: 0.37 to 2.2 kw(single phase)

Power: 1.1 to 4 kw(three phase)

Insulation class: B

Protection grade: IP58

Max diameter: 96mm

Highest tempreature of liquid: 40 ºC
 

5.Parameters table( more models pls feel free to contact us)
 

6.FAQ

1.Q: Are your company is trading company or manufacture?

   A: Pacific Pump Group Co.,Ltd. is a large professional manufacture for more than 18 years in china,and produce with their own factory.

2. Q: What's your factory workshops?

    A: Our factory produce include casting,mechanical process,lathe process,heat treatment,assembly,and test,etc.Warmly welcome to visit & test our factory any time.

3. Q: How about your Submersible deep well pump price?

    A: Our price is factory price,and insist high quality for long-term cooperation.

4. Q: How to do if the pump or parts have operation problem within your warranty?

    A: Tell me details timely,and show me pictures,we will send you solution at once without any hesitation.

5. Q: We don't know which pump model we need,can u help us?

    A: Yes,pls tell me your detail requirement,include liquid,flow rate,head,etc.and our engineers team will calculate & select most suitable pump model for u,offer pump solution for u.

7.Service

 

Before-sale service

Product introduction, technical exchange, non-standard product design, problem explanation. 

 

 

Light Duty Spinning

The principle of metal spinning process is to cover the processed metal blank (tube blank) on the mandrel, while the blank is pressed at the end of the mandrel by the tail, and rotates with the mandrel along the spindle, and the rotary wheel moves along the mandrel.
Generally speaking, light automatic spinning machines have structural advantages similar to ordinary lathes. However, in order to meet the requirements of the above spinning process, large spinning machines usually have the following 11 core advantages.
1. The automatic spinning machine bed, main shaft, and transmission system, rotating wheel frame, tailstock and other parts should have sufficient rigidity, and also have a heavier worktable, a thicker guide rail, and a thick wall bearing support And cabinets.
2. The horizontal and longitudinal feed mechanisms of the rotary frame are mostly driven by hydraulic transmission or a combination of mechanical and hydraulic pressure to generate sufficient spinning pressure and balance step-less speed regulation to meet process requirements.
3. Ordinary automatic spinning machines usually use one rotary wheel, but there are multiple auxiliary forming wheels (flanging wheel, curling wheel, etc.). The number of rotating wheels or rotating frame of the powerful automatic spinning machine is 2 to 3 (the general type is 2, and the cylindrical part spinning machine is mostly 2 to 3), and is symmetrical to the spindle axis. Balancing the radial force during spinning, reducing the bending deflection, deflection, and vibration of the spindle and core mold provides a prerequisite for improving the accuracy of spinning parts. This correspondingly requires the rotary wheel to have a higher horizontal (such as a special spinning machine for cylindrical parts) or a longitudinal (such as a general-purpose automatic spinning machine) synchronous feed accuracy. However, a rotary wheel is used for the light and powerful automatic spinning machine.
4. The main shaft has sufficient transmission torque and power. According to the specific process requirements, it can meet the constant torque or constant power adjustment. In addition, it is best to make the spindle speed and the longitudinal feed speed of the rotary wheel steplessly adjustable. On the one hand, it can meet the arbitrary selection requirements of the spinning process; on the other hand, it can maintain the surface rotation speed of the core mold during the spinning process. Possibility of constant feed per revolution.

Light Duty Spinning,Light Duty Spinning Machine,Spinning Lathe,Cnc Spinning Machine

Jiangsu Hoston Machine Tools Co., Ltd. , https://www.hosdunmachinetools.com