Technical points of titanium alloy milling
The various properties of titanium make it a powerful material for parts, but many of its properties also affect its machinability. Titanium has an excellent strength-to-weight ratio, which is usually only 60% of the density of steel. Titanium has a lower modulus of elasticity than steel, so the texture is harder and the deflection is better. Titanium is also superior to stainless steel in corrosion resistance and has low thermal conductivity. These properties mean that titanium will produce higher and more concentrated cutting forces during processing. It is prone to vibrations that cause chattering during cutting; and it is also prone to react with cutting tool materials during cutting, which can exacerbate crater wear. In addition, its thermal conductivity is poor, and since the heat is mainly concentrated in the cutting zone, the tool for processing titanium must have high heat hardness.
Stability is the key to success. Some machine shops have found that titanium is difficult to process efficiently, but this view does not represent the trend of modern machining methods and tools. Part of the difficulty is due to the fact that titanium processing is an emerging process and lacks experience to learn from. In addition, the difficulties often associated with the operator's experience and expectations, in particular, some people have become accustomed to processing the material in cast iron or low-alloy steel, processing requirements of these materials is generally low. In contrast, machining titanium seems to be more difficult because the same tool and the same rate cannot be used in machining and the tool life is different. Titanium processing is still more difficult than some stainless steels. We can certainly say that the processing of titanium must take different cutting speeds and feeds as well as certain precautions. In fact, titanium is also a completely directly processable material compared to most materials. As long as the titanium workpiece is stable, the clamping is firm, the machine is selected correctly, the power is right, the working conditions are good, and the ISO 50 spindle with a short tool overhang is equipped, all problems will be solved – as long as the cutting tool is correct.
However, in actual milling, the conditions required for titanium metal processing are not always satisfactory, because ideal stability conditions are not always available. In addition, many titanium parts are complex in shape and may contain many fine or deep cavities, thin walls, bevels, and thin brackets. To successfully machine such parts, large overhangs and small diameter tools are required, which can affect tool stability. When processing titanium, it is often more prone to potential stability problems.
Vibration and heat must be considered. The non-ideal environment also includes other factors. One of them is that most machines are currently equipped with IS0 40 spindles. If the machine is used with high strength, it will not be able to maintain a new knife state for a long time. In addition, if the part structure is complicated, it is usually not easy to clamp effectively. Of course, the challenge is not limited to this. The cutting process must sometimes be used for full-groove milling, side-cutting or contour milling, all of which have the potential (but not necessarily) to generate vibrations and poor cutting conditions. It is important to always pay attention to improving stability when setting up the machine to avoid vibration trends. Vibration can cause blade breakage, blade damage and unpredictable and inconsistent results. One improvement is the use of multi-stage clamping to bring the part closer to the main shaft to help counteract the vibration. [next]
Since titanium alloy retains its hardness and strength at high temperatures, the cutting edge encounters high forces and stresses, coupled with the high heat generated in the cutting zone, which means that work hardening is likely to occur, which causes some problems. Produced, especially for subsequent cutting operations. Therefore, choosing the best indexable insert grades and geometries is the key to success. Past history has proven that fine-grained uncoated insert grades are ideal for titanium processing; today, insert grades with PVD titanium coatings can greatly improve performance.
Accuracy, conditions and correct cutting parameters The accuracy of the tool's axial and radial runout is also important. For example, if the blade is not properly installed in the milling cutter, the cutting edge around the milling cutter can be quickly damaged. When cutting titanium, other factors, such as poor tool manufacturing tolerances, wear and tool damage, defective or poor tool holders, machine tool spindle wear, etc., can greatly affect tool life. Observations show that 80% of all cases of poor processing performance are caused by these factors. Although most people prefer to use a positive rake cutter, in fact a slightly negative rake cutter can remove material with a higher feed and feeds up to 0.5 mm per tooth. But this also means that the best stability must be maintained, that is, the machine should be very strong and the clamping should be extremely stable.
In addition to plunge milling (preferably using round inserts), the 90 main declination should be avoided as much as possible. This usually helps to improve stability and overall performance, especially when used in shallow depths. For deep cavity milling, a recommended approach is to use a tool with a variable length through the tool adapter instead of using a single tool of a single length throughout the process.
Adjusting the cutting parameters to overcome the vibration caused by reducing the feed per tooth is a traditional solution, but this method is not appropriate because it can have a catastrophic effect on tool life and cutting performance. Indexable inserts require a certain amount of cutting edge to be rounded to increase cutting edge strength and achieve better coating adhesion.
When milling titanium, the tool is required to work with at least a minimum feed rate - typically 0.1 mm per tooth. If there is still a tendency to vibrate, blade damage or shortened tool life will be unavoidable. Possible solutions include accurately calculating the feed per tooth and making sure it is at least 0.1 mm.
In addition, the spindle speed can be reduced to achieve the initial feed rate. If the minimum feed per tooth is used and the spindle speed is incorrect, the tool life can be as high as 95%. Reducing the spindle speed usually increases tool life.
Once stable conditions are established, the spindle speed and feed rate can be increased accordingly for optimum performance. Another option is to remove some of the blades from the milling cutter or choose a milling cutter with fewer blades.
Commcrcial Vchicle Nylon PA Tube
Changchun FAW Sihuan Automobile Pipeline Co., Ltd
The original intention drives us to persist in innovation and achieve transcendence;
Our mission is to promote our continuous progress and excellence.
We will make our products to the extreme, and the Viewport Monument is the life of the enterprise,
Become a reliable one-stop professional supplier of automotive pipeline products.
Rooted in the northeast, it radiates across the country.Sihuan Pipeline Company, integrating R&D, design, production, experiment and testing, has been specialized in producing nylon gas transmission pipeline, fuel pipeline and high-pressure pipeline products for 20 years.At present, the enterprise has nearly 40000 square meters of modern production workshops and business office buildings, more than 200 senior employees, and an annual output of 56 million automobile
pipeline products.Its subsidiaries are located in Chengdu, Qingdao, Ma'anshan, Jinan, Foshan and other cities. Yuncheng Branch is under preparation to meet the needs of customers in different regions.
Innovative fusion, leading technology
<R&D>
Sihuan Pipeline Co., Ltd. takes technological innovation as its eternal pursuit, and has accumulated profound technical information through 20 years of scientific research, providing the most advanced technical support for each product project.The company has been recognized by the municipal technology center and participated in the revision of several national standards and industrial standards.The scientific research team has reached cooperation with Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun University of Technology and other scientific research institutes, jointly developed a number of provincial science and technology department projects, and achieved a number of technical achievements.The testing laboratory has passed the ISO17025 laboratory management system certification. It has more than 40 sets of tube performance testing equipment and raw material testing instruments, and the testing means are
internationally leading.
Lean production, better quality than gold
<Production>
Sihuan Pipeline Company, based on the industry trend, formulates equipment procurement plans every year and continues to introduce world-class production equipment. Now, it has several automatic extrusion production lines in Merafil, Switzerland, as well as international top equipment such as Clarke bellows molding machine in France, Opel shrink pipe machine in Italy, which are stable, efficient, highly accurate, meet the diversified needs of the main engine factory, and achieve the brand charm of Sihuan.
Scientific management, safeguard quality.The production department implements a quality control system higher than the national standard, adopts 6S management on the site, regularly carries out personnel training, and constantly improves the process procedures.The quality inspection department must inspect every product and every process, resolutely put an end to the delivery of substandard products, and strive to promote product quality to the highest standards in the industry.
Four ring quality, famous throughout the country
<Products>
The products produced by Sihuan Pipeline Company are related to brake systems (including vacuum brake pipes, air brake pipes, spiral pipes, rear axle brake pipes);Fuel system (cover to atmospheric ash filter pipe, fuel pipe, crankcase vent pipe, vacuum pipe);New energy thermal management system and industrial energy storage water inlet and return pipeline assembly integrate safety functions such as check valve, flow regulating valve and exhaust valve, which directly affect vehicle performance and are prerequisites for safe driving;SCR system (including electric heating urea pipe, cooling water pipe and gas pipeline);High pressure pipeline products are used in clutch power assist system and hydraulic lifting pipeline. Excellent performance, stable physical performance, excellent chemical resistance, good processing performance and long service life.All products have passed the CQC certification, and all parameters tested in the laboratory are far higher than the national standards and industry standards.
After 20 years of hard work, Sihuan Pipeline Company has won recognition from all walks of life. It has successively won honorary titles such as "Jilin Province Small Giant Enterprise in Science and Technology", "High tech Enterprise Certificate", Changchun "Specialized, Special and New" SMEs. Its products are
now available to FAW Jiefang, FAW Pentium, Heavy Duty Truck Group, CIMC, Rolls Royce, Yapu, Sany Heavy Industry, GeelyContinental Group and other well-known enterprises are A-level suppliers of FAW Jiefang and other OEMs, and excellent suppliers of Anhui Valin.
In the future, Sihuan Pipeline Co., Ltd. will cater to the national carbon peak strategy, research and develop low emission pipeline manufacturing technology in a forward-looking manner, provide customers with high-quality products and services with innovation and quality, and create a better future for the automotive industry!
Nylon Pa Tube,PA11 Hose,Nylon Fuel tube ,Braided Fuel Line
JiLin TAIYU Technology Manufacturing Co., LTD , https://www.fpcpfuelpipe.com