Tyre Repair Carbide Buffing Wheel Sphere Burrs

Professional in producing Domed contour rasp,Carbide buffing wheel,tire repair tool, reinforced cut-off wheel and grinding wheel, ultra thin cutting disc for metal and stainless steel. The cutting disc and grinding disc are the preferred choice in all kinds, in the metal, structural steel, iron, weld, foundry, stainless steel, aluminum, concrete, masonry, brick, block, stone, and other industries.

Any size we can accept the product consist of a mental base on which tungsten particles have been soldered into the strength of both the soldering and tungsten particles result in an exceptionally strong and long-lasting abrasive tool.

Specifications:
Grit:  20#, 40#, 60#
Diameter:  43mm, 55mm
Hole size:  3/8"-23UNF
Handle length:  23mm

Applications:
1. Mainly used for car" tire, Use for Buffing on inner liner or other smooth rubber surfaces
2. For preparation of inner liner prior to application of patch. Buff injured area of tire to a satiny finish.
3. Buff an area slightly larger than the patch. Do not overbuff. Two carbide buffing wheels on a 1/4" arbor for use with and air powered or electrical buffing tool with Jacobs or similar chuck.

Product Pictures:





Contact Information:
Tel: +86-21-58870860
+86-21-20247707
+86-21-20247708
Fax: +86-21-58822295
 

Website: http://www.ostartools.com
http://www.multitoolblades.cn Professional in producing Domed contour rasp,Carbide buffing wheel,tire repair tool, reinforced cut-off wheel and grinding wheel, ultra thin cutting disc for metal and stainless steel. The cutting disc and grinding disc are the preferred choice in all kinds, in the metal, structural steel, iron, weld, foundry, stainless steel, aluminum, concrete, masonry, brick, block, stone, and other industries.

Any size we can accept the product consist of a mental base on which tungsten particles have been soldered into the strength of both the soldering and tungsten particles result in an exceptionally strong and long-lasting abrasive tool.

Specifications:
Grit:  20#, 40#, 60#
Diameter:  43mm, 55mm
Hole size:  3/8"-23UNF
Handle length:  23mm

Applications:
1. Mainly used for car" tire, Use for Buffing on inner liner or other smooth rubber surfaces
2. For preparation of inner liner prior to application of patch. Buff injured area of tire to a satiny finish.
3. Buff an area slightly larger than the patch. Do not overbuff. Two carbide buffing wheels on a 1/4" arbor for use with and air powered or electrical buffing tool with Jacobs or similar chuck.

Product Pictures:





Contact Information:
Tel: +86-21-58870860
+86-21-20247707
+86-21-20247708
Fax: +86-21-58822295
 

Website: http://www.ostartools.com
http://www.multitoolblades.cn

Aluminum Cut To Length Line

Aluminum Cut To Length Line is category of introducing non ferrous metal coil strip cut to length line, the special character of aluminum cut to length line is continuous non stop leveling and cutting to length, aluminum sheet surface will be smooth without scratch & roll mark.

Continuous cutting to length line is fly cutting or track cutting, include uncoiler, leveler, pair of double rollers servo measuring, track cutting, auto stacking.

Aluminum coil weight within 10T, dimensions ID508, OD1800mm, width 1250-1500mm, length of cutting: 1-6m.

Aluminum Cut To Length Line,Aluminum Sheet Cut To Length Line,Aluminum Sheet Fly Cutting To Length Line,Aluminum Sheet Fly Cut To Length

Wuxi Jinye Complete Set of Equipment Co.Ltd. , https://www.wxjinyemachines.com