Yamz Cylinder Liner for 236 Engine OEM 1002021-A5 Liner

• Model NO.: Yamz 236
• Certification: TS16949, ISO 9001
• Color: Silver
• Type: Wet Cylinder Liner
• Payment: 30% Prepayment, 70% Effected Before The Shipment
• Classification: Semi or Full Finished
• Extra Service: Free Laser Mark
• Selling Point: Factory Supplier with Attractive Price
• Transport Package: Neutral Packing
• Origin: Anhui China

• Application: Excavator, Tractor, Truck
• Warranty: 12 Months
• Material: Cast Iron
• Delivery Time: 25--50days
• Guarantee Period: 1--2years
• Surface Treatment: Chromium/Phosphated/Copper Plated
• Cylinder Liner Suit for: Yamz
• Trademark: XYTOSAN
• Specification: standard size
• HS Code: 8409919930

Specifications
YAMZ 236 cylinder liner 
1.size:130*285mm (CYL. DIA*L) 
2.cylinder liners for russian vehicles 
3.OEM quality 
4.good price
YAMZ 236 cylinder liner    
  
Material:
boron alloy, boron-copper chrome cast iron alloy, steel, etc.
Treating:
phosphated, nitrided, laser treatment, quenching, chrome plated, etc.
 
Performance:
high temperature resistance, high wear resistance, good dimensional stability.
YAMZ Cylinder Liner 236-1002021-A5
OEM: 236-1002021-A5 
1- 8 production lines and strong casting ability for cylinder liners;
 
2- Wet and dry cylinder liners;
 
3- Slip Fit (F), Press Fit (SF);
 
4- Their diameters can range from 55 to 250mm;
 
5- Oxidation phosphor reason and the plasma, laser hardening;
 
6- DIN/ISO4383 and ISO/TS16949 certificated;
1)Wet cylinder
 
The location bores and particularly the running surfaces in the cylinder block must be cleaned carefully and they must be undamaged. Corroded surfaces must be reworked (used flange liners and outer diameter oversize liners). As this is done, make sure that the liners moves in easily and that they take up the correct position (the projecting length of the liner must be in accordance with the regulations of the engine manufacture). After the liner has been installed with the seat rings that belong to it.
 
(use slip agent), the cylinder diameter is to be checked particularly in the region of seal rings so as to determine whether any deformation has been caused by pinched sealing rings. Using the wrong sealing rings (wrong diameter/ wrong materials) can a narrowing of the cylinder which can lead to engine damage.The cooling system should be pressure tested after the liners have been installed so as to determine whether there is any leakage before the engine is started.
 
2)Semi-finished cylinder liner
 
The surface which supports the flange must be vertical to the location bore and it must be sufficiently and evenly beveled. If the liner flange is unevenly supported it can tear off. After the installation of the liner, which is only semi-finished in its inside diameter, this cylinder boring is finely bored and then finished by honing until it has the specified dimensions or, in the case of finely bored liner.It is only finished by honing (tolerance accordingly to DIN ISO H5). The surface of the liner must be flush to the sealing surface of the cylinder block, if necessary,the block surface and the liner must be finished by surface grinding.
 
3)Finished Cylinder liner
 
Before the liner is installed, the location bore in the cylinder block must be cleaned carefully and must be checked to ensure the accuracy of the dimensions and to determine whether any distortion has occurred. Out of center or damaged bores can be reworked for the installation of oversize liners. It is important for this that the locating bore is cylindrical, as this is what determines the geometrical shape of the inside of the pressed in, thin walled liner.
  
4)Air cooling cylinder liner
 
In accordance with the instructions from the engine manufacture, cast iron cylinders or light alloy cylinders are used. 
 
Light alloy cylinders are separated into several groups due to the small installation clearance in the standard cylinder dimensions
 
 Cylinder liner which we can  produce as follows:
  

Specification:
 
Application for:  All Car Models
 
production capacity:500,000 pieces/month
 
Warranty:  1-2 years or 60,000-80,000 kms
 
Delivery time: 7--60 days atfer received deposit
 
Service:
 
1. New products can be developed upon customers' sample or drawing.
 
2. Factory supplier owning attractive price.
 
3. Samples can be sent for customers to check the quality before ordering
 
4. Accepting trail order.
 
5. Free simple laser mark can be offered .
 
Contact information:

ANQING XINYI AUTOPARTS CO.,LTD.
NO.80 Tianzhushan Road, Anqing City,  Anhui Province,PRC
 
TEL: +86-556-5675229/ 5171002          
FAX: +86-556-5171000 

Decor Film

Furniture Decoration Film,Decoration Color Film,Wall Decoration Film,Decoration Film

Dongguan Sunyo Plastic Co., Ltd , https://www.sunyopet.com