Development and Reform Commission to Take Action to Cut Emissions

At the conference on energy conservation and emission reduction results held in Beijing, Han Wenke, director of the Energy Development Institute of the National Development and Reform Commission, said that the “12th Five-Year” special plan for energy conservation and emission reduction will be reported to the State Council in the near future and is expected to be introduced in the second half of this year.

It is understood that there are two related plans for energy conservation and emission reduction during the “Twelfth Five-Year Plan” period. One is “Comprehensive Plan for Energy Conservation and Emission Reduction of the Twelfth Five-Year Plan” (hereinafter referred to as “Program”), and the other is “Twelve. V. "Special Plan for Energy Saving and Emission Reduction" (hereinafter referred to as "Planning"). The "Programme" focuses on policies, "Planning" focuses on the specific implementation, the latter can be said to be the action route of the former. Han Wenke said that the current "plan" has been reported to the State Council and will be introduced in the near future. The "Planning" is in the drafting and perfecting stage. It will soon seek opinions from related departments and then report to the State Council. "The fastest will be in August."

In order to make energy-saving specific, "plan" clearly put forward some rigid requirements, such as energy conservation according to law, so that energy conservation from persuasion, encouragement gradually turned to law enforcement, and resolutely stop all kinds of waste of energy resources. In addition, the "Plan" clearly stipulates that the assessment and assessment of various targets and tasks for decomposition should be strengthened, and a strict accountability and accountability system should be implemented; at the same time, backward production capacity must be eliminated and the blind expansion of the "two high" industries must be strictly controlled.

At the same time, the "planning" also expressed that it will vigorously support the industrialization of advanced energy-saving technologies, energy-saving technological transformation, energy-saving products to benefit the people project, urban sewage and garbage treatment facilities, flue gas desulfurization and denitrification, clean production, heavy metal pollution control and other key projects Construction. At the same time, the "12th Five-Year Plan" period will also improve the policy mechanism, rationalize the relationship between coal, electricity, oil, gas, water, minerals and other resource products, strictly implement the differential power price, punitive electricity price and desulfurization price.

Han Wenke also said that although the energy saving target was adjusted to 16% during the “12th Five-Year Plan” period, it was becoming increasingly difficult. In the earlier period, China closed many high-energy-consuming industries. There is not much space left for the further closure of enterprises during the “12th Five-Year Plan” period. Therefore, he believes that the energy saving and emission reduction during the “12th Five-Year Plan” period, especially energy conservation, will depend on the application of new technologies to promote and, at the same time, combine the transformation of industrial structure and product structure. Take coal-fired industrial boilers as an example. At present, there are about 480,000 coal-fired industrial boilers in China, with an annual consumption of about 600 million tons of raw coal, accounting for about 20% of the country’s total coal consumption. Each year, about 2 million tons of smoke and 6 million tons of sulfur dioxide are emitted. Tons, second only to coal-fired power generation, is the second largest source of soot pollution.

Vessel Production Cutting Machine

The CNC cutting machine has the characteristics of fast cutting speed and small slit in the cutting process, which may lead to limited actual cutting speed, excessive kerf and uneven cutting surface, and eliminate the mechanical failure of the plasma CNC cutting machine. Failure to properly set the plasma CNC cutter related parameters during operation will also affect the actual cutting effect.

The hub processing parts of large ships are concentrated in the base of high-power diesel engine, frame, cylinder block, cylinder head, piston rod, crosshead, connecting rod, crankshaft, and gearbox drive shaft, rudder shaft and propeller, etc. The material is special alloy steel, which is generally processed in small batches and requires a processing yield of 100%. The hinged parts have the characteristics of large weight, complicated shape, high precision and large processing difficulty. Large-scale ship pivot processing requires high-power, high-reliability and multi-axis heavy-duty, ultra-heavy CNC cutting machines.

Industrial Laser Cutting Machine,Vessel Production Gantry Cutting Machine,Vessel Production Flame Cutting Machine,Vessel Production Plasma Cutting Machine

Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachines.com