Heavy truck manufacturer AMW launches new generation of 4928 TR tractors
Recently, India's third-largest truck manufacturer AMW (Asia MotorWorks) introduced a new generation of 4928 TR tractors. The new generation of 4928 TR tractors has a total mass of 49 tons and is powered by a 267-hp Cummins high-pressure common-rail diesel engine. Eaton 9-speed gearbox. The 2528 TP dump truck has a total mass of 25 tons.
The AMW's new car model was designed by Bertone of Italy. It has two structures, a day cab (flat roof) and a day and night cab (high ceiling). The cab body length × width × height has reached the size of 2307mm × 2435mm × 2913mm. The interior of the cab is equipped with a multimedia LED display and GPS, according to Indian media: "Can match any European heavy truck."
Compared with the downbeat performance of European and American heavy truck manufacturers, the performance of China's heavy truck market is enough to describe itself with wind and water. However, Russia, India, and Brazil, which are known as the “BRIC countries†together with China, are also in this market segment in recent years. The performance is good, it is worth attention, in the residential and infrastructure construction field, the truck market in India has shown rapid growth in recent years. In 2010, India's truck sales reached 262,000 units, a 65% increase over the same period, exceeding the 40% growth rate in China. Analysts expect that sales of heavy trucks in India will exceed 500,000 in 2013 in 2014.
Jack is one of the most simple lifting equipment with lifting height of less than 1 m, using jacking rigidity as a working device, through the top bracket or hold claw in the schedule at the bottom of the light and small lifting heavy lifting equipment.Divide into two kinds, mechanical and hydraulic jack is mainly used in mines, transportation and other departments as vehicle repair and other lifting, support, etc.The structure light and strong, flexible and reliable, one man can carry and operation.
Jack is divided into mechanical jacks and hydraulic jack, principle is different. In principle, the principle of hydraulic jack is based on PASCAL's principle, namely: the liquid pressure is the same everywhere, so, in a balanced system, the smaller piston top pressure is small, and the big pressure on the piston is bigger, it can keep the liquid stationary. Through liquid, so can be different on the different pressure, so that you can achieve the goal of a transformation.We are common to the hydraulic jack is to use the principle to achieve the force transfer.Mechanical jacks, using mechanical principle, in the past after pull (handle, claw namely rotary driving ratchet clearance, pull small bevel gear drive big bevel gear, make weight lifting screw rotation, so that the lifting socket for lifting or falling, and achieve the function of the lifting force. But not as easy hydraulic jack.
Lifting Jack,Shot Blasted Jack,Aluminum Die Casting Jack,Car Lifting Jack
NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.aldiecastings.com