Wafer Check Valve Spring Loaded

Double plate check valve wafer type

SPLIT DISC-Cast iron body with epoxy coating and split disc design (Bronze Disc) Wafer connection ANSI 125/150 EPDM, NITRILE (Buna N) bearing. Stainless steel spring hinge pin. Lifting ring standard. Above 4".
Temp Max: 180° F(80° C) Pressure Max: 200 PSI
Operation:
Two independent discs, hinged on a common shaft are held parallel against an elastomer seat by torsional spring force
Installation:
Split Disc check valves are designed for simple Flange-supported installations between standard flanges in the horizontal or in the vertical flow up position. For horizontal flow applications valve must be installed with disc hinge pin in the vertical position to insure proper operation.
Applications:
General Utilities; Chemical; Power Generation; Oil Field; HVAC; Marine; Petrochemical; Steel Industry;
Mechanical Contractors; Commercial Construction

Description:
1. Products Name: DUAL PLATE CHECK VALVE WAFER TYPE
2. Working pressure: PN10/16/25
3. Tests: API598; DIN3230
4. Flange standard: DIN2501 PN10/PN16; BS4504 PN10/PN16;
BS10 TABLE"D"/"E" /JIS2220 10K/16K; ANSI125/150
5. Face to face: ANSI125/150; DIN3203 K3-1999
6. Applications: Water, industrial systems
7. Working temp: EPDM: -10° C~+120° C/NBR: -10° C~+80° C/VITON: -23° C~+150° C/
8. Medium: Fresh water, sea water, waste water, food stuff, steam, all kinds of oil, all kinds of acid and alkaline liquid etc


MATERIALS LIST:



 

200W Hand Blender

200W multifunction hand blender, 200W stick hand blender, 200W immersion hand blender, 200W hand blender set

NINGBO CHENGTUO ELECTRIC APPLIANCE CO.,LTD , https://www.chengtuoappliance.com