How to use MFY-01A seal tester to test the overall performance of soft loose plastic packaging

Keywords: sealing performance, meat food, floss, finished product packaging, leakage, leak, leakage, sealer

1, the meaning

The sealing performance of a package is a key factor related to the quality of the contents of the package. This is because the tightness of the package determines the degree to which the finished product package is independent of the external environment. If the package is poorly sealed, the gas content or components inside the package are prone to occur. Changes, such as the leakage of gas from outside the package into the package or from the gas filled inside the package, are likely to cause problems such as liquid leakage if the package contains liquid components. This can cause product quality degradation. The sealing problem of packaging is generally hidden and can not be identified by the naked eye, so it is difficult to find and deal with it in time before leaving the factory. It is often caused by the leakage and leakage of the contents due to the slow packaging during the long-term circulation and storage after leaving the factory. Moldy, agglomeration, bagging and other quality problems, companies are therefore exposed to greater risks and economic losses. Therefore, the sealing problem of packaging has always been a major problem for enterprises.

In this paper, take Floss Pine as an example to analyze the sealing problem of packaging bags. Meat floss is made from lean meat, chicken or fish in the pork. It is delicious, nutritious and easy to carry. It can be eaten directly or used as an adjunct to other foods. Because the floss itself contains less water and has a high content of nutrients, the requirement for preservation conditions is relatively high. If the package has poor sealing, the floss is prone to agglomeration, mildew and other quality problems.

2, the standard situation

At present, the testing standards for domestic package sealing are mainly GB/T 15171-1994 "Test methods for sealing performance of flexible packages".

3, test sample

The brand of plastic loose-leaf wrapped in plastic bags sold on the market.

4, test equipment

This article uses Chen Chi instrument MFY-01 A sealing tester for testing.

4.1 Test principle

By vacuuming the vacuum chamber of the equipment, the sample immersed in the vacuum chamber water generates a pressure difference between the inside and outside, and checks whether the sample leaks, thereby determining the sealing performance of the sample; or by vacuuming the vacuum chamber, Make the sample produce internal and external pressure difference, and observe the sealing performance of the sample by observing the expansion of the sample and releasing the shape of the sample after releasing the vacuum.

4.2 Application

l Suitable for the overall leak test of glass bottles, tubes, cans, boxes, etc.

l Applicable to the overall leak test of plastic bags, bottles, tubes, cans, boxes, etc.

l Suitable for the overall leak test of metal bottles, tubes, cans, boxes, etc.

l Applicable to the sealing test of paper-plastic composite bags and boxes.

l Meet the requirements of the national standard GB/T 15171 and the American standard ASTM D 3078.

4.3 Equipment Parameters

l The vacuum is 0 ~ -90KPa.

l The effective size of the vacuum chamber is 270 mm (diameter) Ã— 210 mm (height).

5, the test process

(1) Immerse the sample in the water in the vacuum chamber.

(2) Seal the cover and set the required vacuum pressure parameters and holding time.

(3) Turn on the vacuum pump and start vacuuming. Press the start button on the device to start the test.

(4) Observe the presence or absence of continuous air bubbles on the surface of the package during vacuum pumping or during pressure holding.

6, test results

The test results of the sealing performance of the 3 finished packaging bags of Floss Pine were: 2 finished packagings did not leak at -90 KPa, and the sealing performance was good; and another finished product packaging leaked at the edge sealing at -35.4 KPa, sealing Poor sex.

7. Conclusion

Chenchi Instrument MFY-01 A Sealing Tester can be used to test the sealing performance of finished meat packaging. The test is simple in operation, short in time, high in efficiency, and can accurately reflect the sealing performance of meat floss packaging. Through the detection of the tightness of the 3 bags of dried meat floss finished packaging, it was found that not all packages can achieve good sealing performance, while the packages with poor sealing performance are prone to agglomeration, odor, mildew and other quality problems, indicating that the finished product packaging is strengthened. The importance of front sealing performance testing.

Customized Steel Fabrication

QUANTUM Workshop has been supplying steel equipment and structure manufacturing service from the year of 2011. We focus on producing the highest quality conveyor equipment and metal products with advanced steel fabrication processes and machinery. Our commitment to quality metal products, superior customer service and ability to manufacture and assemble has earned us the trust and recognition from our clients in Australia and Asian countries.

Our Fabrication capacity includes but is not limited to:

Structure Engineering Design and Shop detailing services

All Industrial Conveyors, belt conveyor, Chain Conveyor, Bucket Elevator, Screw Conveyors etc.

Heavy industry workshop building structures

Industrial process plant buildings, trusses, trestles

Mining equipment, plate works (chutes, hoppers, bins, tanks etc.)

Non-pressure vessel/tanks

Pipe spools fabrication

Steel Structures Installation

Raw Material can be carbon steel, stainless steel etc. Surface protection can be painted or hot dip galv.

As a diversified supplier, we are able to handle complex projects and can offer a one-stop shop service from detail design and shop detailing to supply and fabrication. This allows for a large reduction in indirect cost and risks. All work is done under one roof and will reduce the number of interfaces and contracts, thus saving on management cost and risks for our clients.

Customized Steel Fabrication,Steel Structure Manufacturing,Structural Steel Fabrication,Custom Metal Fabrication

Quantum Conveying Systems Yangzhou Co.,Ltd. , https://www.fkconveyor.com