First, the operating procedures
(1) Preparation before driving
1. Check each joint and ask for fastening without looseness.
2. Lubricate the lubrication points according to the lubrication requirements.
3. Check the V-belt and ask for a moderate degree of tightness.
4. Pour out rust-proof lime water. The cone is deflected forward to the first or second position, and the steel ball and the wall are washed with water. If necessary, grind the steel ball and the wall with the material to be ground.
5, close the discharge port, add water, ore, pesticides in turn, close the discharge port, and then turn the cone to the horizontal position, you can drive to grind.
(2) The driving stage should be checked regularly:
1. All working parts require stable and no noise.
2. Plug the discharge port and require no leakage.
(three), parking
1. After grinding for a specified period of time, turn off the power and stop. Tilt the cone cylinder to the discharge position to the first grid position, open the discharge port (turn the bolt tightly in the clockwise direction), and put the slurry into the box. Remove the feed plug, introduce the clean water with rubber, rinse the plug and the mineral sand in the wall, then disconnect the car and rinse it, then stop and stop the water.
2. Close the discharge port filled with anti-rust stone water, close the feed port, turn the cylinder to the horizontal position, and clean the parts of the machine with cotton yarn or cloth.
Second, maintenance procedures
(1) Cycle: minor repairs 2-3 years; medium repairs 6-8 years; overhaul 12-15 years.
(2) Maintenance content:
Minor repair: Replace the following consumables: copper sleeves, bushings, compression bolts, plugs, loading cover pressure pads, V-belts, bolt bushings, etc.
Medium repair: The medium repair includes minor repair projects, and inspection and replacement of the cylinder, support plate, bearing housing and other parts.
The failure of the parts and the acceptance criteria are subject to the drawings.
Third, maintenance procedures
(A), lubrication points and cleaning requirements: the operator regularly lubricates the following parts
1, the main bearing and the intermediate shaft
2, support plate bearing
3, motor bearing
(2) According to the requirements of the operating procedures, do the cleaning and sealing work of the cylinder.
3D Bending Fence
The 3D bending fence is also called the bending fence. It has a beautiful shape and various colors. There are more than 200 background colors for you to choose from, which can meet your needs in different venues and environments. The Mesh Fence itself is grid-shaped, which has the characteristics of beautiful and durable, wide vision, various colors, high strength, good rigidity, and beautiful appearance.
The 3D bending fence is an economical choice because it can function as a fence without compromising the overall aesthetic design of the environment.
FAQ
Q1: Are you a factory?
A1: Yes, we are a professional manufacturer of wire mesh products focusing on wire mesh for decades.
Q2: How can I get a quotation?
A2: You need to provide material, sheet size, wire diameter, hole distance and quantity for inquiry. Special requirements can also be specified.
Q3: Is it ok if I want free samples?
A3: Yes, we can provide free samples in 20cm-50cm size along with our catalogue. But the express fee will be on your account. If you place an order, we will refund the courier fee.
Q4: What's your payment term?
A4: Generally, our payment terms are T/T 30% advance payment, balance 70% against copy of B/L. We can also discuss other payment terms.
Q5: How about your delivery time?
A5: 1. We always prepare enough stock materials for your urgent needs, and the lead time for all stock materials is 7 days.
Depending on quantity and technology, exact lead times and production schedules for non-stock items will be communicated to you.
3D Bending Fence,Welded Wire 3D Bending Fence,Garden Iron 3D Bending Fence,Galvanized Wire 3D Bending Fence
Anping County Dongjie Wiremesh Products Co., Ltd. , https://www.dongjiewire.com
