200m, 350m, 400m, 600m Truck Mounted Rotary Drilling Rig with Mud Pump for Sale
Model NO.: DFC-600
Application: Various Soft and Hard Rock, Water Well Drilling Ri
Diesel Engine Power: 191kw
Accessory: We Provide Factory Cost Accessory
Certificate: BV & SGS Certificate
Mud Pump: 3nb-130
Trademark: DEFY
Specification: BV&SGS&ISO
Origin: China, Henan
Model NO.: DFC-600
Application: Various Soft and Hard Rock, Water Well Drilling Ri
Diesel Engine Power: 191kw
Accessory: We Provide Factory Cost Accessory
Certificate: BV & SGS Certificate
Mud Pump: 3nb-130
Trademark: DEFY
Specification: BV&SGS&ISO
Origin: China, Henan
We have some models of truck mounted water well drilling rig for your choice according to your drilling requirements, such as DFC-200, DFC-350A, DFC-400B, DFC-600 etc. DFC-600 Truck Mounted Drilling Rig
Â
Main features:
1. DFC-600 truck mounted drilling rig is designed by our engineers. It is a kind of truck mounted and rotaryÂ
drilling rig.
2. The truck chassis adopts the 8*6 special crane chassis of brand CHANA TRUCK and the main driveÂ
system, the transfer case, gearbox, double-winch unit, mud pump, turntable, drilling tower,Â
feed mechanism are set up on the chassis.
3. This rig is a rotary drilling rig with directional circulation. It is equipped with 3NB-130 mud pump whichÂ
adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
4. The power of drilling rig comes from the truck engine; the rig has distribute implement and hydraulicÂ
system.
5. We can install the spare electric engine and clutch implement according to client's requirement,Â
so that the rig can work with diesel engine or electric engine.
6. We set up a generator (MF) which is convenient to illuminate or work at night.
There are pressure device on the rig so it is high efficiency when the rig drill on mud rock and on theÂ
weathering formation.
7. The main drive of rig is mechanical and the four landing legs and drilling tower are hydraulic controlled.Â
Transfer case and mud pump clutch system are air operated.
 8. According to client's requirement, the rig can carry out down-the-hole hammer drilling with USA Sullair,Â
Japan PDSKIOOS, Sweden Atlas, China Kaishan, Hongwuhuang; can carry out air lifting reverseÂ
circulation drilling with air-water tap, double-wall drilling pipe, gas-water separator;Â
can carry out Hydraulic DTH hammer drilling rock breaking with WB1200/12 mud pump;Â
can carry out core-drilling with other special drilling tools.
| Technical parameter | |||
|  Drilling depth(M) | 600 | ||
|  Drilling diameter(mm) | 500 | ||
|  Speed of turntable(r/min) | 117;102;60;38;22;13;16(reverse) | ||
|  Torque of turntable(KN.m) | 5.4----50 | ||
| Single rope lifting capacity of main windlass(KN) | 50 | ||
| Maximum lifting capacity of main windlass(KN) | 300 | ||
| Single rope lifting capacity of assistant windlass(KN) | 60 | ||
| Maximum lifting capacity of assistant windlass(KN) | 240 | ||
|  The lifting capacity of hook(KN) | 300 | ||
|  Bearing capacity of drilling tower (KN) | 300 | ||
|  The height of drilling tower (mm) | 15000 | ||
| Drill pipe |  Kelly bar(mm) | 108×108×10500 | |
|  Assistant pipe (mm) | .89×10×9000 | ||
| 3NB-130 plunger pump  |
 Stroke of piston (mm) | 140 | |
| Theoretical flow (L / min) | 1000 | ||
| Rated pressure (Mpa) | 5 | ||
|  Diameter of suction tube (mm) | 120 | ||
|  Diameter of drain pipe (mm) | 64 | ||
|  Input power (kw) | 95 | ||
|    Truck chassis |
 Drive form | 8×6 | |
| Â Engine |
 Model | YC6A260-33YC water -cooled four strok diesel engine | |
|  Rated power(KW) | 191 | ||
|  Speed (r/min) | 2300 | ||
|  Size (L*W*H)(mm) | 11510*2480*2800 | ||
|  The highest speed(Km/h) | 75 | ||
|  Weight (kg) | 27500 | ||
|  Transport size(L*W*H)(mm) | 15943×2480×4032 | ||
|  Working size(L*W*H)(mm) | 11539×2480×16749 | ||
 Please contact Andrew for more details and best offer
Phone: 0086-18681448031
Website: www.zzdefydrillrig.com, Â www.cndrillingrigmachine.com
Facebook: www.facebook.com/cndrillingrigs We have some models of truck mounted water well drilling rig for your choice according to your drilling requirements, such as DFC-200, DFC-350A, DFC-400B, DFC-600 etc.Â
DFC-600 Truck Mounted Drilling Rig
Â
Main features:
1. DFC-600 truck mounted drilling rig is designed by our engineers. It is a kind of truck mounted and rotaryÂ
drilling rig.
2. The truck chassis adopts the 8*6 special crane chassis of brand CHANA TRUCK and the main driveÂ
system, the transfer case, gearbox, double-winch unit, mud pump, turntable, drilling tower,Â
feed mechanism are set up on the chassis.
3. This rig is a rotary drilling rig with directional circulation. It is equipped with 3NB-130 mud pump whichÂ
adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
4. The power of drilling rig comes from the truck engine; the rig has distribute implement and hydraulicÂ
system.
5. We can install the spare electric engine and clutch implement according to client's requirement,Â
so that the rig can work with diesel engine or electric engine.
6. We set up a generator (MF) which is convenient to illuminate or work at night.
There are pressure device on the rig so it is high efficiency when the rig drill on mud rock and on theÂ
weathering formation.
7. The main drive of rig is mechanical and the four landing legs and drilling tower are hydraulic controlled.Â
Transfer case and mud pump clutch system are air operated.
 8. According to client's requirement, the rig can carry out down-the-hole hammer drilling with USA Sullair,Â
Japan PDSKIOOS, Sweden Atlas, China Kaishan, Hongwuhuang; can carry out air lifting reverseÂ
circulation drilling with air-water tap, double-wall drilling pipe, gas-water separator;Â
can carry out Hydraulic DTH hammer drilling rock breaking with WB1200/12 mud pump;Â
can carry out core-drilling with other special drilling tools.
| Technical parameter | |||
|  Drilling depth(M) | 600 | ||
|  Drilling diameter(mm) | 500 | ||
|  Speed of turntable(r/min) | 117;102;60;38;22;13;16(reverse) | ||
|  Torque of turntable(KN.m) | 5.4----50 | ||
| Single rope lifting capacity of main windlass(KN) | 50 | ||
| Maximum lifting capacity of main windlass(KN) | 300 | ||
| Single rope lifting capacity of assistant windlass(KN) | 60 | ||
| Maximum lifting capacity of assistant windlass(KN) | 240 | ||
|  The lifting capacity of hook(KN) | 300 | ||
|  Bearing capacity of drilling tower (KN) | 300 | ||
|  The height of drilling tower (mm) | 15000 | ||
| Drill pipe |  Kelly bar(mm) | 108×108×10500 | |
|  Assistant pipe (mm) | .89×10×9000 | ||
| 3NB-130 plunger pump  |
 Stroke of piston (mm) | 140 | |
| Theoretical flow (L / min) | 1000 | ||
| Rated pressure (Mpa) | 5 | ||
|  Diameter of suction tube (mm) | 120 | ||
|  Diameter of drain pipe (mm) | 64 | ||
|  Input power (kw) | 95 | ||
|    Truck chassis |
 Drive form | 8×6 | |
| Â Engine |
 Model | YC6A260-33YC water -cooled four strok diesel engine | |
|  Rated power(KW) | 191 | ||
|  Speed (r/min) | 2300 | ||
|  Size (L*W*H)(mm) | 11510*2480*2800 | ||
|  The highest speed(Km/h) | 75 | ||
|  Weight (kg) | 27500 | ||
|  Transport size(L*W*H)(mm) | 15943×2480×4032 | ||
|  Working size(L*W*H)(mm) | 11539×2480×16749 | ||
 Please contact Andrew for more details and best offer
Phone: 0086-18681448031
Website: www.zzdefydrillrig.com, Â www.cndrillingrigmachine.com
Facebook: www.facebook.com/cndrillingrigs
The High Speed Mixing Machine consists of bottom feed blades and high-speed waste blades. The feed blade paddles continuously feed the bottom material along the barrel wall. The high-speed crushing blades completely crush the materials sent by the blades, so that the materials are circulated into a spiral shape, so as to achieve the purpose of uniform mixing of the materials in a short time. There is no difficulty in cleaning.
Equipment Characteristics:
1). Appearance design is reasonable and safe. The structure of this machine is simply, so it's convenient to clean and maintenance.
2). The paddle is strong and durable, and the material is harmless to people.
3). The plate of the whole machine is heavier than ordinary machines and has a longer service life.
4). The mixing speed and mixing time can be changed according to customer`s request.
5 ).The mixture is even, no small group or small piecesare left .The mixing time is short, it takes only 3-4 minutes to mix 50kg-100kg powder each time.
High Speed Mixer,High Speed Stirrer,High Speed Stirrer Machine,High Speed Mixer Machine
Jiangyin Jirui Machinery Manufacturing Co,LTD , https://www.jyjiruimachine.com