Analysis of the improvement of machine tool utilization rate
In order to reduce the auxiliary time and improve the utilization rate of the machine tool, the universal fixture (precision three-jaw chuck, flat vise, etc.) should be fully utilized in the production of single parts; the combined fixture should be used as much as possible in small batch production; Special fixtures with long cycle; pneumatic, hydraulic clamps and multi-station clamps (some machine tools have hydraulic clamping options) are used in large batches to automatically reverse the pressure plate during processing to avoid interruption of program utilization.
(1) The programming level is uneven, and some use manual programming or blueprint programming. The input program is inefficient when looking at the part drawing.
(2) Error-prone: Some computers use automatic programming. In addition to the difficulty of 4-5 coordinate programming, the problem of generally generating tool path trajectory is not large. The interference or undercut of the tool and the workpiece can be eliminated by simulation.
The process CNC process is the basis of CNC machining, and it can not meet the needs of the development of CNC machining technology for a long time. First of all, the technical reference of the product design chooses the outer contour of the rule too much, and the process margin and processing difficulty caused by the rough and fine machining process margin and the machining deformation bring about the size conversion work and the detection difficulty. It is much more convenient to use high-precision holes as a reference (although the center of the hole is not convenient for routine measurement but does not hinder the positioning of the CNC machine); some shapes (rounded corners, inner grooves, bevel angles, etc.) are designed without regard to the specifications of the CNC tool. Interpolation is too laborious and has low precision.
CAO/CA, CAM integration, especially integration with measurement, is difficult. General CAO software can easily generate NC programs from CAO models, but cannot automatically extract process parameters from CA. The measurement machine program generated by the CAO model often needs to use third-party software. Sometimes, the parts processed by the NC machine do not use the measuring machine and use the simulation method such as the sample board to detect the lack of consistency and integrity of the data. The general problem is the lack of process parameter manuals or standards, especially the lack of materials such as alloys, soft magnetic alloys, honeycomb and thin-wall structures, and high-speed iron cutting.
The management level of the CNC department directly affects and restricts the smooth progress of CNC machining and product quality, including the formulation and scheduling of production plans, the management of machine tools, tools, measuring tools, fixtures, workpieces (blank, semi-finished products, finished products), cutting fluids, Process procedures, change management of numerical control programs, management of quality control and inspection records, etc.
(Finish)
Galvanized Steel Coil products are mainly used in construction, light industry, automobile, agriculture, animal husbandry, fishery and commercial industries. Among them, the construction industry is mainly used to manufacture anti-corrosion industrial and civil building roof panels, roof grilles, etc.; the light industry industry uses it to manufacture household appliance shells, civil chimneys, kitchen utensils, etc., and the automotive industry is mainly used to manufacture corrosion-resistant parts for cars, etc. ; Agriculture, animal husbandry and fishery are mainly used for food storage and transportation, meat and aquatic products freezing processing tools, etc.;
Galvanized Steel Coil,Prepainted Galvanized Steel Coil,PPGI,Galvanised Steel Coils,Steel Coils
Shandong Rizhaoxin Metal Products Co., Ltd. , https://www.sdrizhaoxinsteel.com