Do It Yourself To Clean The Aerial Car Key Steps

Body Wash: Be sure to wash the dirt from the bodywork of the aerial vehicle and then use the car washes. Although the car wash sponge can absorb some sand particles, it still does not rule out the residual sand particles in the friction caused damage to the paint. After the car wash liquid is applied , You can wait a minute or so before you rinse it again to make the ingredients in your car wash work better.

Leather, upholstery parts: If there is slight stain, 3% solution of synthetic detergent for washing can be adhered to the cloth and gently scrubbed. When the stain is heavy, it can be properly cleaned with alcohol. The carpet is mainly cleaned by a vacuum cleaner. Foam cleaner for local cleaning.

Paint oil, shellac: should use a special car oil cleaner to wipe, the effect is very good. Do not use nail scraping or rub with a cloth to wipe, will leave scratches.

Wheel Washing: After washing with car washes, it must be rinsed with clean water to prevent the aging of the sidewalls of the working platform tires. After the snow, the tires and chassis should be washed immediately to remove the alkaline snow melting agent. After the wheel is washed in winter, the brakes should be dried as much as possible. 2. Release the handbrake on the plate and on the ground, otherwise it is easy to freeze the brake pads of the aerial vehicle.

CNC maching parts

Cnc Maching Parts,Extrusion Led Heat Sink,Cnc Aluminum Machining Parts,Cnc Machining Part

Suzhou Wint Electric Co., Ltd , https://www.winforthermal.com