Gt-S Series Stainless Steel Gear Type Pneumatic Vibrator

Model NO.: GT-10-S
Materials: Stainless Steel
Type: Vibrator
Condition: New
HS Code: 8479899990, 8479899990
Effect: Material Handling
Trademark: SMARTSOLU
Transport Package: PP Pag+Box+Carton
Specification: CE
Origin: China
Model NO.: GT-10-S
Materials: Stainless Steel
Type: Vibrator
Condition: New
HS Code: 8479899990, 8479899990
Effect: Material Handling
Trademark: SMARTSOLU
Transport Package: PP Pag+Box+Carton
Specification: CE
Origin: China
We have the following types:
K series: Pneumatic ball vibrator
GT series: Pneumatic turbine vibrator(also has stainless steel type)
R series: Pneumatic roller vibrator
SK series: Impact air hammer


1)Turbine type pneumatic vibrator
2)No lubrication only clean air is required
3)Low noise 60~75dBA
Feature:
1)Turbine type pneumatic vibrator
2)No lubrication only clean air is required
3)Low noise 60~75dBA
4)Compact size


Description:
A high speed range and eccentric working moments are combined in these Vibrators to produce a powerful vibration. The body is made from an extruded stove enamelled aluminium section and the hard coated
End plates enables the vibrator to be used in the food and pharmaceutical industries. The GT-turbine vibrators comply to current international noise regulations under factory test contitions.

Design:

The vibration is produced by the centrifugalforce of the postive and negative unbalance moments in the rotor, the rotor is supported on two heavey duty, prelubricated, matched shielded ball bearings, A special
Long life grease ensures a long working life. The inner and outer raceways of the bearings are designed so that the bearings can be easily replace using only a pin-wrench. The end plates are fitted with right-andleft-hand threads and self-locking.


Gt-S Series Stainless Steel Gear Type Pneumatic Vibrator
 
Dimension Table
Model A Width C D E F G H Weight
mm mm mm mm mm mm Inlet Port exhaust port KG LBS
GT-4 40 28 70 56 10 6 G1/8" G1/8" 0.185 0.45
GT-6 0.185 0.45
GT-6-S 0.210 0.51
GT-8 50 33 86 68 12 7 G1/8" G1/8" 0.255 0.56
GT-10 0.256 0.66
GT-10-S 0.265 0.68
GT-13 65 42 113 90 16 9 G1/4" G1/4" 0.566 1.34
GT-16 0.582 1.38
GT-16-S 0.615 1.45
GT-20 80 56 128 104 16 9 G1/4" G1/4" 1.095 2.50
GT-25 1.121 2.56
GT-25-S 1.205 2.74
GT-30 100 73 160 130 20 11 G3/8" G3/8" 2.220 4.75
GT-36 2.320 5.20
GT-36-S 2.540 5.47
GT-40 120 83 194 152 24 17 G3/8" G3/8" 3.680 8.13
GT-48 3.880 8.67
GT-48-S 4.280 9.65
 
Technical Parameters
Type Frequency(V.P.M) Vibration Power(N) Air consumption(/min)
0.2Mpa 0.4Mpa 0.6Mpa 0.2Mpa 0.4Mpa 0.6Mpa 0.2Mpa 0.4Mpa 0.6Mpa
GT-4 40100 60100 78500 710 1800 2225 30 40 50
GT-6 37400 50000 60900 600 1000 2000
GT-8 35850 43000 45900 980 2100 2950 48 75 152
GT-10 26950 34800 37600 850 1400 2450
GT-13 25950 30050 39800 1450 2450 3700 125 210 280
GT-16 16950 21800 24100 1250 2100 3150
GT-20 16950 19800 23100 2180 4050 5500 188 315 465
GT-25 11980 15600 17100 2150 3550 5600
GT-32 12990 14010 16100 3400 5450 7550 335 520 755
GT-36 7990 10100 13000 3300 5380 7180
GT-40 7650 8850 9550 4350 7350 9850 428 680 960
GT-48 5800 7550 9750 4950 7750 10600

Gt-S Series Stainless Steel Gear Type Pneumatic Vibrator We have the following types:
K series: Pneumatic ball vibrator
GT series: Pneumatic turbine vibrator(also has stainless steel type)
R series: Pneumatic roller vibrator
SK series: Impact air hammer


1)Turbine type pneumatic vibrator
2)No lubrication only clean air is required
3)Low noise 60~75dBA
Feature:
1)Turbine type pneumatic vibrator
2)No lubrication only clean air is required
3)Low noise 60~75dBA
4)Compact size


Description:
A high speed range and eccentric working moments are combined in these Vibrators to produce a powerful vibration. The body is made from an extruded stove enamelled aluminium section and the hard coated
End plates enables the vibrator to be used in the food and pharmaceutical industries. The GT-turbine vibrators comply to current international noise regulations under factory test contitions.

Design:

The vibration is produced by the centrifugalforce of the postive and negative unbalance moments in the rotor, the rotor is supported on two heavey duty, prelubricated, matched shielded ball bearings, A special
Long life grease ensures a long working life. The inner and outer raceways of the bearings are designed so that the bearings can be easily replace using only a pin-wrench. The end plates are fitted with right-andleft-hand threads and self-locking.


Gt-S Series Stainless Steel Gear Type Pneumatic Vibrator
 
Dimension Table
Model A Width C D E F G H Weight
mm mm mm mm mm mm Inlet Port exhaust port KG LBS
GT-4 40 28 70 56 10 6 G1/8" G1/8" 0.185 0.45
GT-6 0.185 0.45
GT-6-S 0.210 0.51
GT-8 50 33 86 68 12 7 G1/8" G1/8" 0.255 0.56
GT-10 0.256 0.66
GT-10-S 0.265 0.68
GT-13 65 42 113 90 16 9 G1/4" G1/4" 0.566 1.34
GT-16 0.582 1.38
GT-16-S 0.615 1.45
GT-20 80 56 128 104 16 9 G1/4" G1/4" 1.095 2.50
GT-25 1.121 2.56
GT-25-S 1.205 2.74
GT-30 100 73 160 130 20 11 G3/8" G3/8" 2.220 4.75
GT-36 2.320 5.20
GT-36-S 2.540 5.47
GT-40 120 83 194 152 24 17 G3/8" G3/8" 3.680 8.13
GT-48 3.880 8.67
GT-48-S 4.280 9.65
Â