Method for maintenance and maintenance of medium wire cutting machine
Too bad a grid must be equipped with a regulated source.
In addition to the normal maintenance of cleanliness and lubrication, medium-cutting wire-cutting machine tools must also carefully maintain the following parts:
The guide rail and screw of the thread cutting machine tool must not be contaminated with dirty water and dirt. Once it is stained with dirt, it must be wiped clean with a clean cotton yarn and then lightly rubbed with a cotton wool soaked in 10# oil again.
Guide wheels and bearings, for the life of the guide pulleys and bearings, should also replace the excessively dirty coolant. If the machine is not turned on for a short time, it is necessary to let the guide wheel turn for tens of seconds without water, so that the guide wheel and the guide wheel cover The dirty water is thrown out, a small amount of oil is injected and then transferred for several tens of seconds, so that the oil and dirt in the gap are thrown out, and then a small amount of oil is injected. In order to make the guide wheel and bearing often in a relatively clean state.
Couplings and keys on the spool shaft and the motor must always be in a tight and secure state. Once the looseness of the key and the crash of the coupling occur, the cushion and the key of the coupling must be replaced immediately. After long time commutation with clearance, the keyway on the shaft will be deformed and expanded.
The cable between the control cabinet and the machine must be protected by a cover plate or plastic plate. Do not step on it. The cable should be in a relaxed and free state. Do not pull the cable outside, do not force the cable plug, and do not protect the cable. Set of fracturing treads.
The console (cabinet) must be handled with care, and do not insert or remove the touch connector or keyboard with oily hands. No part of the bed should be knocked or hit. In particular, the wire frame must not interfere with the bed surface due to the over-travel movement. This will seriously damage the machine parts or accuracy.
Attention should always be paid to keeping the conductive block in good electrical conduction and in isolation from the bed of the wire-cutting wire cutting machine. The workbench pad must be insulated from the bed, and the stepper motor must be in a free state. Stepping motor Make sure that no dirty water enters the dip.
Hanukkah Candle sell very well for Israel ,Color Hanukkah Candle have six colors . it is very small and thin. Small Size Hanukkah Candle is 3.8g . the Dia of Decorative Hanukkah Candle is 0.8cm Length is about 9.5cm . Customer can do own brand and packages . the design is free . Israel celebrates light with candles, dedicated to festivals. Hanukkah Candle's Sample is free, you just need to pay the express fee. The feature of Small Size Hanukkah Candle is no smoking ,no drippless,no scented .the materails is 100%paraffin wax . The package of Color Hanukkah Candle is 44pcs/box 50boxes/ctn or can as your package.
Waiting for you
Hanukkah Candle,Color Hanukkah Candle,Small Size Hanukkah Candle,Decorative Hanukkah Candle
Shijiazhuang Zhongya Candle Co,. Ltd. , https://www.zycandlefactory.com