Separation technology of magnetite, weak magnetic iron ore and polymetallic symbiotic ore

Magnetic iron ore, iron ore and a plurality of weakly magnetic metal Ore sorting techniques:

(1) Magnetite ore dressing Mainly used to select low-grade “Anshan-style” magnetite. Due to the strong magnetic properties of the ore and good grinding, the domestic magnetic separation plant adopts stage grinding and multi-stage grinding process. For the coarse-grained magnetite, the former (a section of grinding), fine-grained and fine-grained inlays are used. The magnetite uses the latter (two or three stages of grinding). The series of permanent magnetization developed by China has made the magnetic separator realize permanent magnetization. After the 1970s, due to the promotion of fine screening and re-grinding technology in the national magnetite ore dressing plant, the concentrate grade was increased from 62% to 66%, achieving the requirement of the Metallurgical Industry Department to reach 65% of the concentrate grade.

(2) Weak magnetic iron ore beneficiation is mainly used to select hematite, limonite, mirror iron ore, siderite, imaginary hematite or mixed ore, also known as "red mine". This type of ore has a low grade, a fine grain size, a complex mineral composition, and difficulty in sorting. After the 1980s, the beneficiation technology has continuously improved the research on the process, equipment and new varieties of roasting magnetic separation, wet magnetic separation, weak magnetic flotation and re-election, so that the concentrate grade and metal recovery rate are continuously improved. For example, the Qishanshan Concentrator of Anshan Iron and Steel Co., Ltd. has adopted a new process of weak magnetic-strong magnetic-flotation, which has achieved encouraging results.

(3) Multi-metal co-ordination ore dressing This type of ore is complex and diverse in type, so the methods, equipment and processes used are also different. For example, the Bayan Obo iron ore uses reverse flotation - multi-gradient magnetic separation, flocculation Flotation, weak magnetic-reverse flotation-strong magnetic separation, weak magnetic-positive flotation, roasting magnetic separation and other different processes to improve the recovery of iron and comprehensive recovery of rare earth oxides. The Panzhihua Iron Mine obtained about 53% of the ferro- vanadium concentrate of TFe by magnetic separation. The tailings after magnetic separation were obtained by weak magnetic sweep-strong magnetic separation-re-election-flotation-drying to obtain titanium concentrate and sulphur- cobalt concentrate. Mine, recycling titanium and cobalt. Daye Iron Mine uses weak magnetic-strong magnetic and flotation to comprehensively recover iron, copper , cobalt and sulfur.

High Pressure Plastik Welding

Wuxi Yuda Polyethylene Welder can meet ISO21307 welding standard. There is a need to examine current practice on a global scale and establish the best procedure(s) for the highest-quality, most reliable and efficient construction of PE butt fusion systems for gas and water distribution.
There are 3 following types of butt fusion welders to meet the standard ISO 21307 : 1. Single Low Pressure Fusion Jointing Welding Machines 2. Double low-pressure Fusion Welders 3. Sigle High Pressure Plastik Welding Equipment. As shown in the graphs of the various systems, the high pressure method of butt welding takes less time to make a weld than low pressure welding fusion. This is a very important factor in lowering the cost of installation, since the cycle times necessary for butt welding large diameter pipes are long. Using the high pressure poly welders means that daily productivity can be significantly increased. Here you can choose relevant SHP series high pressure hdpe welding machines from 40mm-1600mm.


ISO21307 welding

High Pressure Plastic Welding Machine,Butt Fusion Welding,Fusion Welding Machine,Plastic Pipe Welding Machine

WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.wxpipefusionweldings.com