Sewage cleaning method
1, first of all pay attention to the frequency of car wash, not too frequent, so it is easy to damage the sewage suction car paint.
2. Clean water should be used when washing the car, otherwise the fine sand in the sewage will be wiped with float paint. If the temperature in winter is relatively low, it should be cleaned with warm water.
3, to use a clean special car wash towel, the general friction of the towel is strong, it is easy to damage the sewage suction car paint, especially after the winter car wash immediately wipe the body of water in order to avoid residual icing on Damaged paint.
4. Car wash should be carried out in a cool and cool place. It is best to wash the car in the place where the sun shines.
5, in the car wash should pay attention to do some of the components of the sewage suction truck waterproof work, such as speakers, lights, door lock holes, etc., in order to avoid the failure of the horn, fog lights or winter door lock hole water after the ice door lock will not open .
6. Do not wash the car immediately after the sewage suction truck is running in winter. Wait until the engine temperature of the sewage suction car drops and then perform car washing so as not to damage the engine due to thermal expansion and contraction.
Automatic 3D Fiber Laser Pipe Cutting Machine
Technical advantages:
1. Excellent and efficient processing: Five-axis linkage of the bus system realizes space leapfrog and flying cutting technology, and improves efficiency by more than 20-50%.
2. Pipe cutting system: user-friendly and easy to operate, with sufficient pipe process database.
3. Special bed design:reinforced integrated welding bed, after annealing and twice aging treatment, with good stability.
4. Simple and convenient maintenance: the front chuck has good sealing performance and is more durable against dust; The rear chuck blows air automatically, and the pipe wall is cleaner.
5. Automatic feeding rack(optional): realize automatic clamping, pushing and accurate feeding with fast cyclic feeding speed.
6. Good quality and high precision: front and rear full stroke precision pneumatic chuck, multi axis linkage at the same time, good cutting effect and high precision.
7. A15: Double chuck short tailing:the cutting head spans from the front to the back of the front chuck and cuts the last workpiece.The tailing ≥ 40mm can save more material costs.
8. Excellent processing performance: it adopts high rigidity thickened bed, with bus pipe cutting system and bus motor which has faster processing speed and higher precision.
9. Slag extraction system (optional): solve the problem that there is no residue on the inner wall of the pipe, eliminating the secondary vibration polishing process.
10. High efficiency feeding system (optional): high rigidity design of feeding rack, stable and fast feeding and refueling, and the cycle time is about 10 seconds.
Laser Cutting Machine Metal,Automatic Pipe Cutting Machine,Automatic Steel Pipe Cutting Machine,Tube Fiber Laser Cutting Machines
GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.ctklasercutter.com