The most important maintenance part of aerial work vehicles

For the maintenance of aerial work vehicles, many users are unable to start, so what should the maintenance of aerial work vehicles do? Which parts are the objects that need our key protection? The following small series to discuss with you:

Qingling aerial work vehicle

First, the engine

When driving a new car, you can keep the engine in an idle state and listen to whether there is any abnormal sound or vibration. Because the problem of the operation of the car engine has been delayed for a long time, it will accelerate wear, increase the fuel consumption rate, shorten the life, and eventually lead to overhaul.

In order to minimize the load on the vehicle engine drive system. Some serious and attentive car owners take the initiative to take the car to the service station for repair and maintenance after driving for 2,000 kilometers. The maintenance is usually free, and many potential problems can be avoided in time. Don't miss it.

Second, the paint surface

The skin is a very important part of our daily maintenance. The same is true for the car. Although there is no aging problem in the new car paint surface, the car paint has already come into contact with the air from the factory to the customer's hand. It is affected by sandstorm and timely and correct maintenance. Cars are always young.

Maintenance method: "Bathing" for new cars must not be sloppy. If improperly cleaned, it will damage the bright oil part of the outer layer, which will cause the skin of the car to be "dark and dull". It is best to use a mild mild car wash to remove the sand and dirt from the paint surface. Some dirt is invisible to the naked eye. If it is contaminated with chemical components such as paint and gum, it must be wiped a little with a special detergent. Finally, apply protective agents to tires, bumpers, wheel eyebrows, etc. to prevent aging.

Third, the lights

The most important thing for a novice driver is that if your car has a "eye", it will not only affect the comfort of driving, but also directly related to the safety of driving. Therefore, timely maintenance of exterior lighting is critical to the driver.

Maintenance methods: Usually, before getting a reminder, it is difficult for the owner to know if the headlights, taillights, turn signals or parking lights are working properly. First of all, to calibrate the direction of the headlights, in order to ensure the safety of the driver, the headlights must be able to provide good forward lighting for the vehicles; secondly, carefully check other lights, such as turn signals, license plate lighting Lights, width lights, backup lights, and brake lights.

Fourth, the tire

Newly-purchased cars need to be run-in, with the goal of adapting the body's ability to adapt to the environment. The advantages and disadvantages of automobile running-in will have an important impact on the life, safety and economy of the car. In this process, the maintenance of the tire is very important.

Maintenance method: When the new car is run-in, the tire pressure should be normal. The abnormal tire pressure will have certain adverse effects on the new car and it is very dangerous. If the tire pressure is not measured by the barometer, it is difficult for the owner to visually measure it. It is necessary to go to the 4S shop or the regular tire shop to receive the service. (Xu Dandan)